Listar Comunicaciones y ponencias de congresos DIEC - IEKS Biltzarretako komunikazioak eta txostenak por título
Mostrando ítems 107-126 de 180
-
Measurement of paracetamol concentration using a fiber laser system
A linear fiber laser system for measurements of paracetamol concentration is experimentally demonstrated. The cavity is based on a fiber loop mirror and an FBG centered at 1567.8 nm. The sensing head corresponds to a ... -
Medida de torsión en seguidores solares con sensores de fibra óptica
En este trabajo se ha monitorizado la torsión sufrida por una estructura de seguidores solares empleando sensores de fibra óptica. Estas medidas de campo se han obtenido con una red de sensores formada por 45 redes de ... -
Metal 3D printed D-Band waveguide to surface wave transition
The coupling efficiency between free space waves and surface waves is low, narrowband, or both. Highly efficient broadband (better than 20% fractional bandwidth) coupling from waveguide modes can be achieved through ... -
Micro sized interdigital capacitor for humidity detection based on agarose coating
A micro sized interdigital capacitor has been proposed for the detection of relative humidity. The photolithography technique enables the fabrication of fingers with a size of 10x500 um. A thin film of agarose functionalizes ... -
Micro-displacement sensor based on hollow core fiber interferometers
An interferometric sensor based on hollow core fibers for the measurement of micro-displacement has been designed. Its characterization has resulted in a linear response, suggesting its application in pressure sensors. -
Micro-displacement sensor based on hollow core fiber interferometers
An interferometric sensor based on hollow core fibers for the measurement of micro-displacement has been designed. Its characterization has resulted in a linear response, suggesting its application in pressure sensors. -
Micro-drilled optical fiber for enhanced laser strain sensors
In this work, we present an experimental measurement of temperature and strain sensitivities of a micro-drilled optical fiber (MDOF). The MDOF consisted of a quasi-randomly distributed reflector along a single mode fiber ... -
Microstructured optical fiber sensor for soil moisture measurements
A discrete sensor based on a Sn0₂-FP (Fabry-Pérot) cavity is presented and characterized in real soil conditions. Results are compared, for the first time to our knowledge, with a commercial capacitive sensor and gravimetric ... -
MIMO based decoupling strategy for grid connected power converters controlled in the synchronous reference frame
Power converters are frequently connected to the grid through a LCL filter, controlling its power transfer through a current control loop in the synchronous reference frame. In this reference frame, cross coupling terms ... -
Mode transition during deposition of nanoscale ITO coatings on tilted fiber Bragg gratings
The mode transition phenomenon is experimentally demonstrated in tilted fiber Bragg gratings (TFBG) through the deposition of an indium tin oxide (ITO) thin film employing a DC sputtering machine. -
Modeling solar cavity receivers: a review and comparison of natural convection heat loss correlations
As the main difficulty of modeling cavity receivers is determining natural convection heat losses, this paper presents a survey of the different natural convection correlations developed by several authors to model natural ... -
Modeling the inherent damping of high-power inverters
In order to decide whether passive or active damping is required in a three-phase inverter, a previous step is to assess the intrinsic damping of the system. However, few works focus on modeling this damping for DC/AC ... -
Modelling and operation of 6-pulse thyristor rectifiers for supplying high power electrolyzers
This paper presents a detailed analysis of a 6-pulse thyristor rectifier aimed at supplying high power electrolyzers. For this purpose, an analytical model of the three-phase controlled rectifier with AC-side inductance ... -
Monitoring of electric buses within an urban smart city environment
A practical experience on monitoring the data generated by electric buses is presented, focusing on energy consumption, charge and state of the batteries. The work is carried out in the framework of a global smart city ... -
Multi-sensing platform design with a grating-based nanostructure on a coverslip substrate
Two different thin film designs with a grating pattern are simulated on a soda lime coverslip, which acts as optical waveguide, with the purpose of generating both a lossy mode resonance (LMR) in transmission and reflection ... -
Multicore fiber sensors for strain measurement towards traffic monitoring
In this work, two new interferometric sensors based on multicore optical fibers for the measurement of strain with the ultimate goal of traffic monitoring are presented. The operating principle of each sensor relied on ... -
Multipactor breakdown analysis of Ku-band meandered low-pass filter
In this work, a very compact rectangular waveguide low-pass filter with meandered topology based on commensurate lines for Ku-band satellite applications is analysed for high-power handling capabilities. The device consists ... -
Multiplexing optical fiber Fabry-Perot interferometers based on air-microcavities
In this work we demonstrate the multiplexing capability of new optical fiber Fabry-Perot interferometers based on airmicrocavities using a commercial FBG interrogator. Three optimized air-microcavity interferometer sensors ... -
Mutual-coupling reduction in metamaterial substrate integrated waveguide slotted antenna arrays using metal fence isolators for SAR and MIMO applications
A new type of mutual coupling reduction technique is applied to metamaterial substrate integrated waveguide (SIW) slotted antenna array. The circular shaped reference SIW antenna array is constructed from Alumina substrate ... -
Narrowband and spectrally robust thermal emission from metallic thin films on top of epsilon-near-zero substrates
The absorption and emission of infrared radiation by ultra-thin metallic films is a key element in several thermal engineering applications such as heat and energy management, and thermal camouflage. However, ultra-thin ...