Show simple item record

dc.creatorCenoz Echeverría, Isaaces_ES
dc.identifier.issn2300-1909 (Electronic)
dc.description.abstractThe phases obtained in copper aluminium bronze alloy (Cu-Al10-Fe2) cast into a permanent die were investigated. The parameters examined were the pre-heating temperatures of the die and the graphite coating thickness. The phases α and γ2 were detected as well as the metastable phases β’ and γ’. The intermetallics of the system Fe-Al were obtained in various stoichiometric compositions. The different cooling rates of the casting resulted in two mechanisms of transformation to α grains out of the unstable β phase, one being nucleation and growth producing needle shaped α grains, the other exhibiting a massive transformation to spherical α grains. These two mechanisms determine the changes in the size of the α grains as a result of changes in the cooling rate in its various ranges.en
dc.format.extent5 p.
dc.publisherWalter de Gruyteren
dc.relation.ispartofArchives of Metallurgy and Materials, vol. 55, 2010, issue 4en
dc.rightsCreative Commons Attribution-NonCommercial-NoDerivatives 4.0 Internationalen
dc.subjectAluminium bronzeen
dc.subjectIron dieen
dc.titleInfluence of metallic die temperature in the solidification of Cu-10%Al-2%Fe alloyen
dc.typeArtículo / Artikuluaes
dc.contributor.departmentUniversidad Pública de Navarra. Departamento de Ingeniería Mecánica, Energética y de Materialeses_ES
dc.contributor.departmentNafarroako Unibertsitate Publikoa. Mekanika, Energetika eta Materialen Ingeniaritza Sailaeu
dc.rights.accessRightsAcceso abierto / Sarbide irekiaes
dc.type.versionVersión publicada / Argitaratu den bertsioaes

Files in this item


This item appears in the following Collection(s)

Show simple item record

Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
Except where otherwise noted, this item's license is described as Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International