A comparative study of acid and alkaline aluminum extraction valorization procedure for aluminum saline slags
Fecha
2022Versión
Acceso abierto / Sarbide irekia
Tipo
Artículo / Artikulua
Versión
Versión publicada / Argitaratu den bertsioa
Identificador del proyecto
Impacto
|
10.1016/j.jece.2022.107546
Resumen
A management process for saline slags, one of the wastes from Secondary Aluminum Production, is proposed. The process begins with a grinding step, followed by washing with water, which removed the fluxing salts but provoking the hydrolysis of AlN, yielding Al(OH)3 and ammonia. Sieving of the solid generated an intermediate and a fine fraction. The first one was rich in metallic aluminum, and can ...
[++]
A management process for saline slags, one of the wastes from Secondary Aluminum Production, is proposed. The process begins with a grinding step, followed by washing with water, which removed the fluxing salts but provoking the hydrolysis of AlN, yielding Al(OH)3 and ammonia. Sieving of the solid generated an intermediate and a fine fraction. The first one was rich in metallic aluminum, and can also be returned to the Secondary Aluminum Production. The fine fraction was submitted to a extraction process in acid (HCl or HNO3) or alkaline (NaOH, KOH or CsOH) conditions, under reflux at 90 ºC, obtaining an Al(III) solution that can be used in the synthesis of aluminum-based solids. HCl (1-8 mol/L) and NaOH (1-4 mol/L) were used as reference solutions, HNO3, NaOH and KOH were used under specific conditions; the slag fraction:extraction solution solid:liquid ratio was also varied. The optimum extraction conditions were: extraction time 2 h, solid:liquid ratio 3:10, concentration 3 mol/L for the NaOH medium and 4 mol/L for the HCl medium. More than 30% of the aluminum present in the fraction smaller than 0.4 mm was recovered (the remaining aluminum was present as insoluble phases, corundum and spinel). Acid or basic media can be selected depending on the final use of Al(III) solutions, the basic medium leading to an Al(III) solution with a lower amount of impurities. The hazardousness of the solid obtained after the extraction process was greatly decreased, making possible the use of this solid residue in sectors such as construction. [--]
Materias
Aluminum saline slags,
Industrial waste valorization,
High-value-added products,
Aluminum extraction
Editor
Elsevier
Publicado en
Journal of Environmental Chemical Engineering, 2022, 10 (3)
Departamento
Universidad Pública de Navarra. Departamento de Ciencias /
Nafarroako Unibertsitate Publikoa. Zientziak Saila /
Universidad Pública de Navarra/Nafarroako Unibertsitate Publikoa. Institute for Advanced Materials and Mathematics - INAMAT2
Versión del editor
Entidades Financiadoras
This work was supported by 'Memoria de D. Samuel Solórzano Barruso' Foundation (FS/11-2020). AJ thanks Universidad de Salamanca and Banco Santander for a predoctoral contract. AG is grateful for financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through project PID2020-112656RB-C21. AG also thanks Santander Bank for funding via the Research Intensification Program.