Diseño y validación de un convertidor reductor para carga solar de móvil
Fecha
2019Autor
Director
Versión
Acceso abierto / Sarbide irekia
Tipo
Trabajo Fin de Grado/Gradu Amaierako Lana
Impacto
|
nodoi-noplumx
|
Resumen
Con las tecnologías
que disponemos hoy en día,
se puede aprovechar la energía solar
para algo tan necesario como nuestros smartphones, los cuales en momentos puntuales
necesitan recargarse, y no en cualquier lugar.
Mediante la
energía solar captada en los módulos fotovoltaicos, es
posible recargar una
batería externa que a su vez en cualquier momento podrá cargar nuestro móvi ...
[++]
Con las tecnologías
que disponemos hoy en día,
se puede aprovechar la energía solar
para algo tan necesario como nuestros smartphones, los cuales en momentos puntuales
necesitan recargarse, y no en cualquier lugar.
Mediante la
energía solar captada en los módulos fotovoltaicos, es
posible recargar una
batería externa que a su vez en cualquier momento podrá cargar nuestro móvil, y así
poderlo tener al máximo de batería.
Esto es posible mediante el uso de dos convertidores reductores DC/DC y dos controles.
El primer convertidor está entre los módulos fotovoltaicos y la batería que acumula
energía y controlará la tensión.
El segundo convertidor está entre la batería y la batería del móvil y controlará la
corriente. [--]
Nowadays with the technologies that we have, we can make the most
of solar energy
for something necessary like
smartphones, which in certain
moments need to
be
charged, and not a chosen location.
With the solar energy absorbed by
the
photovoltaic modules, it is
possible
to
recharge
an external battery, which in any moment will
charge our
phone, and this keep it fully ...
[++]
Nowadays with the technologies that we have, we can make the most
of solar energy
for something necessary like
smartphones, which in certain
moments need to
be
charged, and not a chosen location.
With the solar energy absorbed by
the
photovoltaic modules, it is
possible
to
recharge
an external battery, which in any moment will
charge our
phone, and this keep it fully
charged.
This is possible thanks to
the
use of two DC/DC buck converters
and two controls.
The first converter is placed between the solar modules, and the battery which collect
the energy, and it will be
controlled by a voltage control.
The second converter will be placed between the battery and the phone battery, and it
will be controlled by a current control. [--]
Materias
Control,
Buck,
Convertidos,
DC/DC,
Almacenamiento,
Fotovoltaica
Titulación
Graduado o Graduada en Ingeniería Eléctrica y Electrónica por la Universidad Pública de Navarra /
Ingeniaritza Elektriko eta Elektronikoko Graduatua Nafarroako Unibertsitate Publikoan