Listar Dpto. Ingeniería Eléctrica y Electrónica - Ingeniaritza Elektriko eta Elektronikoa Saila por autor UPNA "Ursúa Rubio, Alfredo"
Mostrando ítems 1-18 de 18
-
Analytical design methodology for Litz-wired high-frequency power transformers
In the last quarter of a century, high-frequency (HF) transformer design has been one of the major concerns to power electronics designers in order to increase converter power densities and efficiencies. Conventional design ... -
Boost DC-AC inverter: a new control strategy
Boost dc–ac inverter naturally generates in a single stage an ac voltage whose peak value can be lower or greater than the dc input voltage. The main drawback of this structure deals with its control. Boost inverter ... -
Comparison of State-of-Charge estimation methods for stationary Lithium-ion batteries
An accurate monitoring of the State of Charge (SoC) is mandatory for an efficient management of a Lithium-ion battery. Batteries of stationary systems barely have long resting periods when the cumulative errors can be ... -
A comprehensive model for lithium-ion batteries: from the physical principles to an electrical model
The growing interest in e-mobility and the increasing installation of renewable energy-based systems are leading to rapid improvements in lithium-ion batteries. In this context, battery manufacturers and engineers require ... -
Electro-thermal modelling of a supercapacitor and experimental validation
This paper reports on the electro-thermal modelling of a Maxwell supercapacitor (SC), model BMOD0083 with a rated capacitance of 83 F and rated voltage of 48 V. One electrical equivalent circuit was used to model the ... -
Electronic controlled device for the analysis and design of photovoltaic systems
The characterization and design of photovoltaic systems is a difficult issue due to the variable operation atmospheric conditions. With this aim, simulators and measurement equipments have been proposed. However, most of ... -
Energy storage systems based on lithium-ion batteries and supercapacitors: characterization, modelling and integration with renewable energies
Los inconvenientes medioambientales, sociales y económicos que presentan los combustibles fósiles y nucleares están propiciando un uso cada vez mayor de fuentes de energía renovables. El fuerte desarrollo tecnológico de ... -
High frequency power transformers with foil windings: maximum interleaving and optimal design
Foil conductors and primary and secondary interleaving are normally used to minimize winding losses in high frequency transformers used for high-current power applications. However, winding interleaving complicates the ... -
Hydrogen production from water electrolysis: current status and future trends
This paper reviews water electrolysis technologies for hydrogen production and also surveys the state of the art of water electrolysis integration with renewable energies. First, attention is paid to the thermodynamic and ... -
Hydrogen-lithium energy storage for a stand-alone microgrid
Sizing of the storage system for a stand-alone application: Satisfaction of technical requirements; Based on real data from an experimental microgrid; Long lifetime; Lowest price -
Influence of the power supply on the energy efficiency of an alkaline water electrolyser
Electric energy consumption represents the greatest part of the cost of the hydrogen produced by water electrolysis. An effort is being carried out to reduce this electric consumption and improve the global efficiency ... -
Lithium-ion battery model and experimental validation
A simple battery model is useful for: Sizing of the storage system for a particular application; Designing other elements connected to the battery; Managing the storage system operation. This poster consists on: Tests to ... -
Methodology for sizing stand-alone hybrid systems: a case study of a traffic control system
This paper proposes a methodology for sizing stand-alone hybrid photovoltaic-wind power generation systems. This methodology makes it possible to optimise the overall performance of the stand-alone system components, based ... -
Modelado y metodología analítica de diseño de transformadores de potencia y alta frecuencia: análisis de los devanados, optimización de eficiencia y densidad de potencia e integración en el diseño de convertidores electrónicos
Esta tesis se centra en el estudio y análisis del diseño de transformadores de potencia y alta frecuencia. Los principales temas tratados en esta tesis se resumen a continuación: - Realización del estado del arte y ... -
Modelling of PEM fuel cell performance: steady-state and dynamic experimental validation
This paper reports on the modelling of a commercial 1.2 kW proton exchange membrane fuel cell (PEMFC), based on interrelated electrical and thermal models. The electrical model proposed is based on the integration of the ... -
On the stability criteria for inverter current control loops with LCL output filters and varying grid impedance
The use of LC and LCL filters and grid impedance variations are creating new challenges on the controller design for current control loops of photovoltaic and wind turbine inverters. In the design process, stability criteria ... -
On the testing, characterization, and evaluation of PV inverters and dynamic MPPT performance under real varying operating conditions
The increasing number of photovoltaic inverters that are coming on to the PV marketstresses the need to carry out a dynamic characterization of these elements and theirmaximum power point tracking (MPPT) algorithms under ... -
Static and dynamic characterization of a supercapacitor
Supercapacitors (SCs) have recently received a major boost as a result of the development of multiple applications, such as the electric vehicle and electric microgrids. Storage systems consisting of SCs combined with ...