Buscar
Mostrando ítems 1-10 de 14
Wavelength and phase detection based SMS fiber sensors optimized with etching and nanodeposition
(IEEE, 2016)
Artículo / Artikulua,
The development of an optical fiber refractometer by
hydrogen fluoride etching and sputtering deposition of a thin-film
of indium tin oxide on a single-mode-multimode-single-mode fiber
structure has been analyzed with ...
Gasohol quality control for real time applications by means of a multimode interference fiber sensor
(MDPI, 2014)
Artículo / Artikulua,
In this work we demonstrate efficient quality control of a variety of gasoline and ethanol (gasohol) blends using a multimode interference (MMI) fiber sensor. The operational principle relies on the fact that the addition ...
Detection of ethanol in human breath using optical fiber long period grating coated with metal-organic frameworks
(MDPI, 2017)
Contribución a congreso / Biltzarrerako ekarpena,
An optical fiber sensor for ethanol detection in exhaled breath has been developed. It has been fabricated by functionalizing a Long Period Grating with a metal-organic framework, ZIF-8. The sensor’s response was tested ...
Lossy mode resonance generation with indium tin oxide coated optical fibers for sensing applications
(IEEE, 2010)
Artículo / Artikulua,
Surface plasmon resonances and lossy mode
resonances can be generated with Indium Tin Oxide (ITO)
coated optical fibers. Both phenomena are analyzed and
compared. Lossy mode resonances present important
advantages: ...
Sources of noise in Brillouin optical time-domain analyzers
(SPIE, 2015)
Contribución a congreso / Biltzarrerako ekarpena,
This paper presents a thorough study of the different sources of noise affecting Brillouin optical time-domain analyzers (BOTDA), providing a deep insight into the understanding of the fundamental limitations of this kind ...
Sensitivity enhancement by diameter reduction in low cutoff wavelength single-mode multimode singlemode (SMS) fiber sensors
(IEEE, 2017)
Contribución a congreso / Biltzarrerako ekarpena,
Two different low cutoff wavelength single-mode fibers were used in single-mode multimode single-mode (SMS) configuration with the aim of designing sensors operating at short wavelengths, where optical sources and spectrometers ...
Giant sensitivity of optical fiber sensors by means of lossy moderesonance
(Elsevier, 2016)
Artículo / Artikulua,
Here we show an optical refractometer with a giant sensitivity of 304,360 nm per refractive index unit(nm/RIU). This sensitivity corresponds to a resolution of 3.28 × 10−9RIU if a standard optical spectrumanalyzer with a ...
Compound lasing fiber optic ring resonators for sensor sensitivity enhancement
(IEEE / OSA, 2015)
info:eu-repo/semantics/article,
In this work, a new method for increasing simultaneously the sensitivity and interrogation stability of fiberoptic intensity sensors is presented. The configuration is based on a double-coupler ring resonator. On one side, ...
Study of optical fiber sensors for cryogenic temperature measurements
(MDPI, 2017)
info:eu-repo/semantics/article,
In this work, the performance of five different fiber optic sensors at cryogenic temperatures
has been analyzed. A photonic crystal fiber Fabry-Pérot interferometer, two Sagnac interferometers,
a commercial fiber Bragg ...
Interferometric vs wavelength selective optical fiber sensors for cryogenic temperature measurements
(SPIE, 2017)
info:eu-repo/semantics/conferenceObject,
In this work, a preliminary study of the behavior of two different interferometric fiber optic sensors and two different wavelength selective fiber optic sensors is performed. A photonic cristal fiber Fabry-Pérot interferometer, ...