• Analytical design methodology for Litz-wired high-frequency power transformers 

      Barrios Rípodas, Ernesto Upna Orcid; Ursúa Rubio, Alfredo Upna Orcid; Marroyo Palomo, Luis Upna Orcid; Sanchis Gúrpide, Pablo Upna Orcid (IEEE, 2015)   Artículo / Artikulua  OpenAccess
      In the last quarter of a century, high-frequency (HF) transformer design has been one of the major concerns to power electronics designers in order to increase converter power densities and efficiencies. Conventional design ...
    • Boost DC-AC inverter: a new control strategy 

      Sanchis Gúrpide, Pablo Upna Orcid; Ursúa Rubio, Alfredo Upna Orcid; Gubía Villabona, Eugenio Upna Orcid; Marroyo Palomo, Luis Upna Orcid (IEEE, 2005)   Artículo / Artikulua  OpenAccess
      Boost dc–ac inverter naturally generates in a single stage an ac voltage whose peak value can be lower or greater than the dc input voltage. The main drawback of this structure deals with its control. Boost inverter ...
    • A comprehensive model for lithium-ion batteries: from the physical principles to an electrical model 

      Berrueta Irigoyen, Alberto Upna Orcid; Urtasun Erburu, Andoni Upna Orcid; Ursúa Rubio, Alfredo Upna Orcid; Sanchis Gúrpide, Pablo Upna Orcid (Elsevier, 2018)   Artículo / Artikulua  OpenAccess
      The growing interest in e-mobility and the increasing installation of renewable energy-based systems are leading to rapid improvements in lithium-ion batteries. In this context, battery manufacturers and engineers require ...
    • Electro-thermal modelling of a supercapacitor and experimental validation 

      Berrueta Irigoyen, Alberto Upna Orcid; San Martín Biurrun, Idoia Upna Orcid; Hernández, Andoni; Ursúa Rubio, Alfredo Upna Orcid; Sanchis Gúrpide, Pablo Upna Orcid (Elsevier, 2014)   Artículo / Artikulua  OpenAccess
      This paper reports on the electro-thermal modelling of a Maxwell supercapacitor (SC), model BMOD0083 with a rated capacitance of 83 F and rated voltage of 48 V. One electrical equivalent circuit was used to model the ...
    • Electronic controlled device for the analysis and design of photovoltaic systems 

      Sanchis Gúrpide, Pablo Upna Orcid; López Taberna, Jesús Upna Orcid; Ursúa Rubio, Alfredo Upna Orcid; Marroyo Palomo, Luis Upna Orcid (IEEE, 2005)   Artículo / Artikulua  OpenAccess
      The characterization and design of photovoltaic systems is a difficult issue due to the variable operation atmospheric conditions. With this aim, simulators and measurement equipments have been proposed. However, most of ...
    • High frequency power transformers with foil windings: maximum interleaving and optimal design 

      Barrios Rípodas, Ernesto Upna Orcid; Urtasun Erburu, Andoni Upna Orcid; Ursúa Rubio, Alfredo Upna Orcid; Marroyo Palomo, Luis Upna Orcid; Sanchis Gúrpide, Pablo Upna Orcid (IEEE, 2015)   Artículo / Artikulua  OpenAccess
      Foil conductors and primary and secondary interleaving are normally used to minimize winding losses in high frequency transformers used for high-current power applications. However, winding interleaving complicates the ...
    • Hydrogen production from water electrolysis: current status and future trends 

      Ursúa Rubio, Alfredo Upna Orcid; Gandía Pascual, Luis Upna Orcid; Sanchis Gúrpide, Pablo Upna Orcid (IEEE, 2012)   Artículo / Artikulua  OpenAccess
      This paper reviews water electrolysis technologies for hydrogen production and also surveys the state of the art of water electrolysis integration with renewable energies. First, attention is paid to the thermodynamic and ...
    • Influence of the power supply on the energy efficiency of an alkaline water electrolyser 

      Ursúa Rubio, Alfredo Upna Orcid; Marroyo Palomo, Luis Upna Orcid; Gubía Villabona, Eugenio Upna Orcid; Gandía Pascual, Luis Upna Orcid; Diéguez Elizondo, Pedro Upna Orcid; Sanchis Gúrpide, Pablo Upna Orcid (Elsevier, 2009)   Artículo / Artikulua  OpenAccess
      Electric energy consumption represents the greatest part of the cost of the hydrogen produced by water electrolysis. An effort is being carried out to reduce this electric consumption and improve the global efficiency ...
    • Methodology for sizing stand-alone hybrid systems: a case study of a traffic control system 

      San Martín Biurrun, Idoia Upna Orcid; Berrueta Irigoyen, Alberto Upna Orcid; Sanchis Gúrpide, Pablo Upna Orcid; Ursúa Rubio, Alfredo Upna Orcid (Elsevier, 2018)   Artículo / Artikulua  OpenAccess
      This paper proposes a methodology for sizing stand-alone hybrid photovoltaic-wind power generation systems. This methodology makes it possible to optimise the overall performance of the stand-alone system components, based ...
    • Modelling of PEM fuel cell performance: steady-state and dynamic experimental validation 

      San Martín Biurrun, Idoia Upna Orcid; Ursúa Rubio, Alfredo Upna Orcid; Sanchis Gúrpide, Pablo Upna Orcid (MDPI, 2014)   Artículo / Artikulua  OpenAccess
      This paper reports on the modelling of a commercial 1.2 kW proton exchange membrane fuel cell (PEMFC), based on interrelated electrical and thermal models. The electrical model proposed is based on the integration of the ...
    • On the testing, characterization, and evaluation of PV inverters and dynamic MPPT performance under real varying operating conditions 

      Sanchis Gúrpide, Pablo Upna Orcid; López Taberna, Jesús Upna Orcid; Ursúa Rubio, Alfredo Upna Orcid; Gubía Villabona, Eugenio Upna Orcid; Marroyo Palomo, Luis Upna Orcid (Wiley, 2007)   Artículo / Artikulua  OpenAccess
      The increasing number of photovoltaic inverters that are coming on to the PV marketstresses the need to carry out a dynamic characterization of these elements and theirmaximum power point tracking (MPPT) algorithms under ...

      El Repositorio ha recibido la ayuda de la Fundación Española para la Ciencia y la Tecnología para la realización de actividades en el ámbito del fomento de la investigación científica de excelencia, en la Línea 2. Repositorios institucionales (convocatoria 2020-2021).
      Logo MinisterioLogo Fecyt