Buscar
Mostrando ítems 21-30 de 38
Resonances in coated long period fiber gratings and cladding removed multimode optical fibers: a comparative study
(Optical Society of America, 2010)
info:eu-repo/semantics/article,
Two optical fiber devices have been coated in parallel: a long
period fiber grating (LPFG) and a cladding-removed multimode optical
fiber (CRMOF). The progressive coating of the LPFG by means of the
layer-by-layer ...
Generation of lossy mode resonances by deposition of high-refractive-index coatings on uncladded multimode optical fibers
(IOP Publishing Ltd, 2010)
Artículo / Artikulua,
A comparative study of lossy mode resonances generated by depositing two different materials
is presented. The two materials selected are indium tin oxide (ITO) and indium oxide. The two
materials present different ...
Design rules for lossy mode resonance based sensors
(Optical Society of America, 2012)
Artículo / Artikulua,
Lossy mode resonances can be obtained in the transmission spectrum of cladding removed
multimode optical fiber coated with a thin-film. The sensitivity of these devices to changes
in the properties of the coating or the ...
Refractometric sensors based on multimode interference in a thin-film coated singlemode– multimode–single-mode structure with reflection configuration
(Optical Society of America, 2014)
Artículo / Artikulua,
Thin-film coated single-mode–multimode–single-mode (SMS) structures have been analyzed both theoretically
and experimentally with the aim of detecting different refractive indices. By adequate selection
of the thickness ...
Tapered single-mode optical fiber pH sensor based on lossy mode resonances generated by a polymeric thin-film
(IEEE, 2012)
Artículo / Artikulua,
Lossy mode resonances can be generated with certain polymeric nanostructures, such as those obtained with a multilayered assembly of poly(allylamine hydrochloride) and poly (acrylic acid). This coating is adsorbed by the ...
Fabrication of Bragg gratings on the end facet of standard optical fibers by sputtering the same material
(IEEE, 2016)
Artículo / Artikulua,
A sputtering process has been applied to deposit quarter-wavelength stacks on the end facet of cleaved optical fibers by using only one sputtering target. Standard multimode optical fibers were used as substrates to fabricate ...
Influence of waist length in lossy mode resonances generated with coated tapered single mode optical fibers
(IEEE, 2011)
Artículo / Artikulua,
In this work, the generation of electromagnetic resonances due to the deposition of a nanocoating on a tapered single-mode optical fiber is analyzed. The layer-by-layer technique is used to control the thickness of the ...
Sensitivity enhancement in a multimode interference-based SMS fibre structure coated with a thin-film: theoretical and experimental study
(Elsevier, 2014)
info:eu-repo/semantics/article,
Spectral width reduction in lossy mode resonance-based sensors by means of tapered optical fibre structures
(Elsevier, 2014)
Artículo / Artikulua,
Optical sensors based on lossy-mode resonances
(Elsevier Science, 2017)
Artículo / Artikulua,