Design and prototyping of an automated system for the fabrication and testing of optical fiber sensors
Fecha
2019Autor
Director
Versión
Acceso abierto / Sarbide irekia
Tipo
Trabajo Fin de Grado/Gradu Amaierako Lana
Impacto
|
nodoi-noplumx
|
Resumen
This thesis describes the
design and programming of
the movement and
temperature control of an automated system used for the fabrication of optical fiber
sensors. The automated system pumps and injects different
programmed samples into a
flow cell containing the optical fiber, which makes the sensor. The different samples are
displa ...
[++]
This thesis describes the
design and programming of
the movement and
temperature control of an automated system used for the fabrication of optical fiber
sensors. The automated system pumps and injects different
programmed samples into a
flow cell containing the optical fiber, which makes the sensor. The different samples are
displayed
on a rectangular matrix
in a
Cartesian coordinate robot. The temperature of the
system is measured by a thermistor,
adjusted with
a couple of Peltier cells and
controlled
with a
L298N motor driver.
The system is controlled by an Arduino Mega and it also includes a printed
Arduino Mega shield with the
designed
circuits for the movement and temperature control.
The user is able to mov
e and program the system with a Raspberry touchscreen using CNC
commands.
The design and coding of the system enable the use of different sensors, motors
and other components;
and
also, the use of different samples for the optical fiber sensor. [--]
Materias
Automated system,
Biosensor,
Stepper motor,
Motor driver,
PI control,
CNC code
Titulación
Graduado o Graduada en Ingeniería en Tecnologías Industriales por la Universidad Pública de Navarra /
Industria Teknologietako Ingeniaritzan Graduatua Nafarroako Unibertsitate Publikoan