Optical sensor based on polymer electrospun nanofibers for sensing humidity
Fecha
2011Autor
Versión
Acceso abierto / Sarbide irekia
Tipo
Contribución a congreso / Biltzarrerako ekarpena
Impacto
|
nodoi-noplumx
|
Resumen
A novel humidity sensor based on polymer electrospun nanofibers coating onto an optical fiber is proposed in this work. The coating is composed of poly(acrylic acid), and its fabrication was performed by the electrospinning technique using an optical fiber core as substrate. This technique allows the fabrication of sensitive films with high surface area in a fast and simple way compared to other ...
[++]
A novel humidity sensor based on polymer electrospun nanofibers coating onto an optical fiber is proposed in this work. The coating is composed of poly(acrylic acid), and its fabrication was performed by the electrospinning technique using an optical fiber core as substrate. This technique allows the fabrication of sensitive films with high surface area in a fast and simple way compared to other overlay fabrication techniques. The sensor was tested in a programmable temperature and humidity climatic chamber. Relative Humidity (RH) was varied in the range from 20%RH to 80%RH at room temperature. The results showed a monotonic variation of the absorbance spectra to RH changes, thus obtaining a successful humidity sensor. [--]
Materias
Optical fibre sensors,
Humidity,
Coatings
Notas
Póster presentado al 5th International Conference on Sensing Technology (ICST 2011). Palmerston North (Nueva Zelanda), 2011.
Departamento
Universidad Pública de Navarra/Nafarroako Unibertsitate Publikoa. Institute of Smart Cities - ISC /
Universidad Pública de Navarra. Departamento de Ingeniería Eléctrica y Electrónica /
Nafarroako Unibertsitate Publikoa. Ingeniaritza Elektrikoa eta Elektronikoa Saila
Entidades Financiadoras
This work was supported by the Spanish Ministry of Education and Science-FEDER Research Grant TEC2010-17805