Buscar
Mostrando ítems 1-10 de 59
A comparative study between SMS interferometers and lossy mode resonace optical fiber devices for sensing applications
(SPIE, 2015)
Contribución a congreso / Biltzarrerako ekarpena,
Optical fiber sensors are of great interest due to their intrinsic advantages over electronic sensors. In this work, the
sensing characteristics of two different and novel optical fiber devices are compared, after ...
Asymmetrically and symmetrically coated tapered optical fiber for sensing applications
(SPIE, 2015)
Contribución a congreso / Biltzarrerako ekarpena,
The deposition of a non-metallic thin-film in a symmetrically coated tapered optical fiber leads to the generation of resonances due to guidance of a mode in the thin-film. At certain conditions, the resonances overlap ...
Optical fiber refractometers based on sputtered indium tin oxide coatings
(IEEE, 2011)
Contribución a congreso / Biltzarrerako ekarpena,
This work presents the fabrication of optical fiber
refractometers based on indium tin oxide (ITO) coatings
deposited by sputtering with response in the visible spectral
region. ITO thin-films have been sputtered by ...
Tunable optical fiber pH sensors based on TE and TM Lossy Mode Resonances (LMRs)
(Elsevier, 2016)
Artículo / Artikulua,
In this paper, a high sensitivity optical fiber pH sensor based on lossy mode resonance (LMR) generated
with transversal electric (TE) and transversal magnetic (TM) polarized light is presented. Poly(allylamine
hydrochloride) ...
Experimental study and sensing applications of polarization-dependent lossy mode resonances generated by D-shape coated optical fibers
(IEEE, 2015)
Artículo / Artikulua,
The fabrication and characterization of an optical fiber refractometer based on Lossy Mode Resonances (LMR) is presented. TiO2/ poly (sodium 4-styrenesulfonate) (PSS) coatings deposited on side-polished D-shaped optical ...
Fringe generation with non-uniformly coated long-period fiber gratings
(Optical Society of America, 2007)
Artículo / Artikulua,
In this work, the spectral characteristics of non-uniform
symmetrically ring shaped coatings deposited on long-period fiber gratings
(LPFGs) have been theoretically and experimentally investigated. To
optimize the ...
Lossy mode resonance generation with indium tin oxide coated optical fibers for sensing applications
(IEEE, 2010)
Artículo / Artikulua,
Surface plasmon resonances and lossy mode
resonances can be generated with Indium Tin Oxide (ITO)
coated optical fibers. Both phenomena are analyzed and
compared. Lossy mode resonances present important
advantages: ...
Fiber-optic immunosensor based on lossy mode resonances induced by indium tin oxide thin-films
(IEEE, 2017)
Contribución a congreso / Biltzarrerako ekarpena,
A novel immunosensor based on lossy mode resonances (LMRs) induced in optical fibers is developed in this contribution. Indium tin oxide (ITO) is sputtered on the optical substrate to generate an LMR in the transmission ...
SnO2 based optical fiber refractometers
(SPIE, 2012)
Contribución a congreso / Biltzarrerako ekarpena,
In this work, the fabrication and characterization of refractometers based on lossy mode resonances (LMR) is presented. Tin dioxide (SnO2) films deposited on optical fibers are used as the LMR supporting coatings. These ...
Sensitivity enhancement by diameter reduction in low cutoff wavelength single-mode multimode singlemode (SMS) fiber sensors
(IEEE, 2017)
Contribución a congreso / Biltzarrerako ekarpena,
Two different low cutoff wavelength single-mode fibers were used in single-mode multimode single-mode (SMS) configuration with the aim of designing sensors operating at short wavelengths, where optical sources and spectrometers ...