Open Access
A proposal of a constitutive description for aluminium alloys in both cold and hot working
(MDPI, 2016) León Iriarte, Javier; Luis Pérez, Carmelo Javier; Fuertes Bonel, Juan Pablo; Puertas Arbizu, Ignacio; Luri Irigoyen, Rodrigo; Salcedo Pérez, Daniel; Ingeniería Mecánica, Energética y de Materiales; Mekanika, Energetika eta Materialen Ingeniaritza
The most important difficulties when the behaviour of a part that is subjected to external mechanical forces is simulated deal with the determination of both the material thermo-mechanical properties and its boundary conditions. The accuracy of the results obtained from the simulation is directly related to the knowledge of the flow stress curve. Therefore, the determination of a material flow rule which is valid for both a wide temperature range and different initial deformation conditions in the starting material presents a great deal of interest when simulation results close to the experimental values are required to be obtained. In this present study, a novel flow stress curve is proposed that is able to accurately predict the behaviour of both materials with no previous accumulated strain and materials that have been previously subjected to severe plastic deformation processes. Moreover, it is possible to use it both for hot and cold working. The results are analysed in a wide test temperature range, which varies from room temperature to 300 °C, and from material previously processed by angular channel extrusion or with no previous strain accumulated. It is shown that the flow rule proposed is effective to model the material behaviour in a wide temperature range and it makes it possible to take the recrystallization phenomena that appear in previously deformed materials into account. In addition, the results obtained are compared with those predicted by other flow rules that exist in the prior literature. Furthermore, the study is complemented with finite element simulations and with a comparison between simulation and experimental results.
Open Access
Experimental modelling of critical damage obtained in Al-Mg and Al-Mn alloys for both annealed state and previously deformed by ECAP
(Elsevier, 2016) Luri Irigoyen, Rodrigo; Fuertes Bonel, Juan Pablo; Luis Pérez, Carmelo Javier; Salcedo Pérez, Daniel; Puertas Arbizu, Ignacio; León Iriarte, Javier; Ingeniería Mecánica, Energética y de Materiales; Mekanika, Energetika eta Materialen Ingeniaritza
Assessing the damage produced in plastic deformation processes permits the optimum manner to shape a material that could avoid any cracks from appearing. In this present research work, the absolute critical damage in the following aluminium alloys: AA5754, AA5083 and AA3103 is to be determined. In order to do this, compression tests between plane-shape dies will be performed for the abovementioned alloys at a temperature range which varies from 25 °C to 300 °C and using Cockroft–Latham's prediction model. Furthermore, the results obtained by finite volume simulations will be compared with those obtained by experimental tests with isothermal upsetting. Given that in these last few years there has been a growing interest in obtaining mechanical components from submicrometric and/or nanometric structure materials which have been previously-processed by severe plastic deformation (SPD), this present research work deals with the determination of absolute critical damage for the abovementioned alloys once they have been ECAP (Equal Channel Angular Pressing) processed. This is considered to be of interest since it could allow the prediction of optimal processing conditions in advance.

Luri Irigoyen, Rodrigo

Email Address

person.page.identifierURI

Birth Date

Job Title

Last Name

First Name

person.page.departamento

person.page.instituteName

ORCID

person.page.observainves

person.page.upna

Name

Filters

Author

Subject

Date

Has files

Item Type

Type

Settings

Sort By

Results per page

Search Results