Person:
Giménez Díaz, Rafael

person.page.identifierURI

https://academica-e.unavarra.es/handle/2454/49147

Last Name

Giménez Díaz

First Name

Rafael

person.page.departamento

Ingeniería

person.page.instituteName

IS-FOOD. Research Institute on Innovation & Sustainable Development in Food Chain

ORCID

0000-0003-3210-0578

person.page.upna

6698

Full item page

Search Results

Now showing 1 - 10 of 19

Open Access
Evaluation of surface roughness parameters in agricultural soils with different tillage conditions using a laser profile meter
(Elsevier, 2016) Martínez de Aguirre Escobar, Alejandro; Álvarez Mozos, Jesús; Giménez Díaz, Rafael; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak
Surface roughness crucially affects the hydrological and erosive behaviours of soils. In agricultural areas surface roughness is directly related to tillage, whose action strongly affects the key physical properties of soils and determines the occurrence and fate of several processes (e.g., surface storage, infiltration, etc.). The characterisation of surface roughness as a result of tillage operations is not straightforward, and numerous parameters and indices have been proposed for quantifying it. In this article, a database of 164 profiles (each 5 m long), measured in 5 different roughness classes, was analysed. Four roughness classes corresponded to typical tillage operations (i.e., mouldboard, harrow, seedbed, etc.), and the fifth represented a seedbed soil that was subject to rainfall. The aim of the research was to evaluate and select the surface roughness parameters that best characterised and quantified the surface roughness caused by typical tillage operations. In total, 21 roughness parameters (divided into 4 categories) were assessed. The parameters that best separated and characterised the different roughness classes were the limiting elevation difference (LD) and the Mean Upslope Depression index (MUD); however, the parameters most sensitive to rainfall action on seedbed soils were limiting slope (LS) and the crossover lengths measured with the semivariogram method (lSMV) and the root mean square method (lRMS). Many parameters had high degrees of correlation with each other, and therefore gave almost identical information. The results of this study may contribute to the understanding of the surface roughness phenomenon and its parameterisation in agricultural soils.
Open Access
Runoff, nutrients, sediment and salt yields in an irrigated watershed in southern Navarre (Spain)
(Elsevier, 2018) Merchán Elena, Daniel; Casalí Sarasíbar, Javier; Valle de Lersundi, Jokin del; Campo-Bescós, Miguel; Giménez Díaz, Rafael; Preciado, Beatriz; Lafarga, Alberto; Landa Ingeniaritza eta Proiektuak; Institute on Innovation and Sustainable Development in Food Chain - ISFOOD; Proyectos e Ingeniería Rural
The environmental impact of irrigated agriculture on water quality was assessed in Landazuria watershed (Navarre, northeast Spain), a 479.5 ha watershed with 53% of irrigated agricultural land. In the framework of a long-term monitoring program, precipitation and discharge were measured at 10-min intervals and compound daily water samples were collected during the agricultural years (September to August) 2007–2016, and analysed for nitrate (NO3−), phosphate (PO43−), sediment and total dissolved solids (TDS) concentrations. Typical agricultural management (including crop surfaces, irrigation and fertilization rates) was obtained from inquiries to farmers. Concentration and yield of the studied variables presented a high degree of variation, both intra- and inter-annual. Median concentration for the entire study period were 185, <0.05, 31 and 2284 mg L−1 for NO3−, PO43−, sediment and TDS, respectively. NO3−-N and PO43−-P yields averaged 74 and 0.04 kg ha−1 year−1, respectively. NO3 −-N yield was higher than in other agricultural land uses in Navarre and in the order of magnitude of other irrigated areas in the Middle Ebro Valley. PO43−-P yield was in the same order of magnitude than in rainfed watersheds in Navarre but lower than in intensively grazed watersheds. Sediment yield was extremely variable, averaging 360 kg ha−1 year−1, with 44% of the total measured load recorded in a few days. It was in the lower range of those measured in Navarre for rainfed agriculture and similar to those estimated in other irrigated areas of the Middle Ebro River. TDS concentration presented a significant decreasing trend since available salts were being washed out, while TDS yield averaged 1.8 Mg ha−1 year−1. Long-term monitoring of irrigated areas is required to understand pollution processes in these agroecosystems and to adequately characterize the environmental impact of current agricultural practices on water quality, in order to implement, and adequately assess, measures to reduce agricultural pollution.
Open Access
Factors controlling sediment export in a small agricultural watershed in Navarre (Spain)
(Elsevier, 2012) Giménez Díaz, Rafael; Casalí Sarasíbar, Javier; Grande Esteban, Ildefonso; Díez Beregaña, Javier; Campo-Bescós, Miguel; Álvarez Mozos, Jesús; Goñi Garatea, Mikel; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak; Gestión de Empresas; Enpresen Kudeaketa; Gobierno de Navarra / Nafarroako Gobernua
It is recognised that the hydrological and erosion processes in watersheds are very much conditioned by the (inter)action of a number of variables. This paper covers a 15-year period of studying those factors that have a major influence on the sediment yield and transport during individual hydrological events in a small Mediterranean agricultural watershed. Multivariate statistical techniques such as cluster analysis and principal component analysis were applied for the interpretation of datasets. In addition, the relationships between suspended sediment concentration and discharge (hysteretic loops) were also analysed. The hydrological response of the studied watershed is mainly controlled by the antecedent condition of the flow. Most of the runoff and sediment are generated during the wet season when vegetation cover is scant and saturation overland flow occurs promptly as a response to almost any rainfall events. In contrast, during the dry seasons even if high-intensity rainfalls normally occur, very scant runoffs are, however recorded, at the exit of the watershed. Most of the eroded sediment seems to come from riparian areas. The discharge registered at the watershed outlet up to 1 h prior to the flood is a very good surrogate for antecedent soil moisture.
Open Access
In-situ assessment of the spatial arrangement of step-pool units on eroded rills
(wiley, 2019) Govers, G.; Campo-Bescós, Miguel; Zubieta Laseca, Elena; Giménez Díaz, Rafael; Ingeniaritza; Institute on Innovation and Sustainable Development in Food Chain - ISFOOD; Ingeniería
Open Access
Evaluación de la producción de sedimentos y calidad de las aguas en cuencas agrarias de Navarra
(Universidad de La Rioja, 2012) Giménez Díaz, Rafael; Casalí Sarasíbar, Javier; Díez Beregaña, Javier; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak; Gobierno de Navarra / Nafarroako Gobernua
The Government of Navarre (Spain) established a series of experimental watersheds on different sites of its territory in order to assess the impact of the agricultural activities on the environment. Hydrological/meteorological and water quality data are continuously monitored. In this paper, data recorded –precipitation, runoff, sediment, nitrate and phosphate– in two grain-sown watersheds (La Tejería and Latxaga) and in a third one (Oskotz) covered with forest and pasture (cattle-breeding) with a sub-watershed almost entirely under forest, are analyzed; the information covers a period of ca. 15 years. The inter/intra annual variability of the involved processes are studied as well as their impact on the water quality and on the ecosystem. The majority of the sediments yielded in the watersheds are registered during winter, though most of the erosive rainfalls occurred in summer. This is because of the easy-prone runoff that prevailed during winter due to the (much) higher water content of the soils in this period. The grain-sown watersheds –roughly similar at first view– present however important differences regarding sediment yield: 1800 kg/ha year at La Tejería and only 450 kg/ha year at Latxaga. This could be mainly due to differences in morphology, topography, and amount of stream channel vegetation between both sites. At Oskotz this figures are as a whole lower than those registered in the cultivated watersheds but eventually larger than those at Latxaga; this depending on the forest management (logging). Water quality is seriously affected at La Tejería with nitrate concentration constantly over critical threshold. By contrast, nitrate values are much lower in Latxaga watershed. However, phosphate concentrations were similar in both grain-sown watersheds corresponding to water with a significant risk of eutrophication. The cattle-breeding activity at Oskotz generated unexpected levels of phosphate much higher than those registered in the cultivated wathersheds.
Open Access
Assessment of soil factors controlling ephemeral gully erosion on agricultural fields
(Wiley, 2017) Ollobarren del Barrio, Paul; Campo-Bescós, Miguel; Giménez Díaz, Rafael; Casalí Sarasíbar, Javier; Landa Ingeniaritza eta Proiektuak; Institute on Innovation and Sustainable Development in Food Chain - ISFOOD; Proyectos e Ingeniería Rural; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
The soil factor is crucial in controlling and properly modeling the initiation and development of ephemeral gullies (EGs). Usually, EG initiation has been related to various soil properties (i.e. sealing, critical shear stress, moisture, texture, etc.); meanwhile, the total growth of each EG (erosion rate) has been linked with proper soil erodibility. But, despite the studies to determine the influence of soil erodibility on (ephemeral) gully erosion, a universal approach is still lacking. This is due to the complex relationship and interactions between soil properties and the erosive process. A feasible soil characterization of EG erosion prediction on a large scale should be based on simple, quick and inexpensive tests to perform. The objective of this study was to identify and assess the soil properties – easily and quickly to determine – which best reflect soil erodibility on EG erosion. Forty‐nine different physical–chemical soil properties that may participate in establishing soil erodibility were determined on agricultural soils affected by the formation of EGs in Spain and Italy. Experiments were conducted in the laboratory and in the field (in the vicinity of the erosion paths). Because of its importance in controlling EG erosion, five variables related to antecedent moisture prior to the event that generated the gullies and two properties related to landscape topography were obtained for each situation. The most relevant variables were detected using multivariate analysis. The results defined 13 key variables: water content before the initiation of EGs, organic matter content, cation exchange capacity, relative sealing index, two granulometric and organic matter indices, seal permeability, aggregates stability (three index), crust penetration resistance, shear strength and an erodibility index obtained from the Jet Test erosion apparatus. The latter is proposed as a useful technique to evaluate and predict soil loss caused by EG erosion.
Open Access
Gully geometry: what are we measuring?
(European Geosciences Union, 2015) Casalí Sarasíbar, Javier; Giménez Díaz, Rafael; Campo-Bescós, Miguel; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak
Much of the research on (ephemeral) gully erosion comprises the determination of the geometry of these eroded channels, especially their width and depth. This is not a simple task due to uncertainty generated by the wide range of variability in gully cross section shapes found in the field. However, in the literature, this uncertainty is not recognized so that no criteria for their measurement are indicated. The aim of this work is to make researchers aware of the ambiguity that arises when characterizing the geometry of an ephemeral gully and similar eroded channels. In addition, a measurement protocol is proposed with the ultimate goal of pooling criteria in future works. It is suggested that the geometry of a gully could be characterized through its mean equivalent width and mean equivalent depth, which, together with its length, define an “equivalent prismatic gully” (EPG). The latter would facilitate the comparison between different gullies.
Open Access
Hydrological effects of the sediments deposited off a hillslope affected by rill erosion: project outlines and preliminary results
(Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa, 2007) Giménez Díaz, Rafael; Casalí Sarasíbar, Javier; Campo-Bescós, Miguel; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak
The main objectives of this project are (i) to evaluate the sedimentation rate generated by rill erosion in a hillslope and the granulometric characteristics of the sediment deposited off this hillslope, and (ii) to determine the incidence of this sediment on the hydrological properties of the sedimentation area. In addition, an extra aim is to gain insight into the spatial and temporal evolution of a rill network under field condition.
Open Access
Progress in gully erosion research: IV International Symposium on Gully Erosion
(Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa, 2007) Casalí Sarasíbar, Javier; Giménez Díaz, Rafael; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak
The classic forms of water erosion of the soil comprise sheet, rill, and gully erosion. According to the concept most generalized, in sheet erosion, thin layers of material are uniformly removed from the soil surface due to the action of an overland flow, in a homogeneous manner, over the area affected. This results in a normally very gradual and inappreciable loss of soil. However, in rill and gully erosion, the soil loss is caused by the intense action of a concentrated flow, which thus triggers the formation of small or large channels, i.e. rills or gullies, although the mechanisms implicated in either form of concentrated flow erosion are not identical. One of the main differences probably lies in the (much) greater interrelation between the roughness of the channel bed and the hydraulics of the water flow observed in a eroded rill, with respect to what occurs in a typical gully. So, the latter, as a physical process, deserves a special and specific study. Gully erosion, of world-wide importance, is catalogued by some of the principal centres devoted to soil resource conservation as being the foremost problem to be solved. As it is one of the most serious forms of water erosion, this phenomenon is capable of generating major soil losses even though it covers limited land surfaces. Additionally, the damage caused by this type of erosion frequently spreads beyond the area directly affected, i.e. through the siltation of lakes and reservoirs due to the large amounts of sediments it originates. Nevertheless, gully erosion has not received the attention that it warrants from the scientific community. For instance, a rapid search through any important virtual library shows that only less than 10% of soil erosion studies published up to now in international scientific journals deal directly and specifically with gully erosion. More research and surveys are required in order to obtain a better understanding of the physical mechanisms involved in this type of erosion, with the ultimate aim of developing accurate prediction algorithms and efficient control and damage prevention systems. In fact, there are so many unanswered questions on this important environment topic that scientists all over the world have been holding periodic meetings, in which the latest knowledge and advances in the study of gully erosion have been expounded. The first of these meetings was held in Leuven (Belgium) in 2000, the second in Sicuani (China) in 2002 and the third in Oxford, Mississippi (U.S.A.) in 2004. On that last occasion, the participants proposed that Pamplona (Spain) should be the seat of the following meeting, to be held in September 2007. This book contains the abstracts both from the key speeches and from the contributions presented in the IV International Symposium on Gully Erosion held in Pamplona, in September, 2007.
Open Access
Influence of surface roughness sample size for C-band SAR backscatter applications on agricultural soils
(IEEE, 2017) Martínez de Aguirre Escobar, Alejandro; Álvarez Mozos, Jesús; Lievens, Hans; Verhoest, Niko E. C.; Giménez Díaz, Rafael; Landa Ingeniaritza eta Proiektuak; Institute on Innovation and Sustainable Development in Food Chain - ISFOOD; Proyectos e Ingeniería Rural
Soil surface roughness determines the backscatter coefficient observed by radar sensors. The objective of this letter was to determine the surface roughness sample size required in synthetic aperture radar applications and to provide some guidelines on roughness characterization in agricultural soils for these applications. With this aim, a data set consisting of ten ENVISAT/ASAR observations acquired coinciding with soil moisture and surface roughness surveys has been processed. The analysis consisted of: 1) assessing the accuracies of roughness parameters s and l depending on the number of 1-m-long profiles measured per field; 2) computing the correlation of field average roughness parameters with backscatter observations; and 3) evaluating the goodness of fit of three widely used backscatter models, i.e., integral equation model (IEM), geometrical optics model (GOM), and Oh model. The results obtained illustrate a different behavior of the two roughness parameters. A minimum of 10-15 profiles can be considered sufficient for an accurate determination of s, while 20 profiles might still be not enough for accurately estimating l. The correlation analysis revealed a clear sensitivity of backscatter to surface roughness. For sample sizes >15 profiles, R values were as high as 0.6 for s and ~0.35 for l, while for smaller sample sizes R values dropped significantly. Similar results were obtained when applying the backscatter models, with enhanced model precision for larger sample sizes. However, IEM and GOM results were poorer than those obtained with the Oh model and more affected by lower sample sizes, probably due to larger uncertainly of l.