Open Access
Exploring surface roughness in epsilon-near-zero materials
(IEEE, 2024-10-08) Navajas Hernández, David; Pérez Escudero, José Manuel; Liberal Olleta, Íñigo; Ingeniería Eléctrica, Electrónica y de Comunicación; Ingeniaritza Elektrikoa, Elektronikoa eta Telekomunikazio Ingeniaritza; Institute of Smart Cities - ISC
The practical application of materials with epsilon-near-zero (ENZ) characteristics heavily depends on the quality of real-world ENZ materials, considering factors like material losses and surface roughness. These materials have drawn interest due to their strong nonlinear responses and unique behavior. In this study, an experimental examination of how surface roughness affects ENZ substrates is presented. We employed silicon carbide (SiC) substrates deliberately engineered to exhibit different levels of roughness, enabling us to analyze samples spanning from a few to hundreds of nanometers in size scales. Substrates with nanoscale roughness experience adverse effects due to longitudinal phonon coupling and strong ENZ fields, while at larger roughness scales, the ENZ band demonstrates to be more robust compared to dielectric and surface phonon polariton (SPhP) bands.
Open Access
Remote sensing for plant water content monitoring: a review
(MDPI, 2021) Quemada Mayoral, Carlos; Pérez Escudero, José Manuel; Gonzalo García, Ramón; Ederra Urzainqui, Íñigo; Santesteban García, Gonzaga; Torres Molina, Nazareth; Iriarte Galarregui, Juan Carlos; Institute of Smart Cities - ISC; Institute for Multidisciplinary Research in Applied Biology - IMAB
Las redes sociales se han convertido en una de las principales fuentes de información, especialmente entre los más jóvenes. Al mismo tiempo, se ha incrementado la producción y circulación de información falsa o fake news a través de las redes. En este contexto, resulta crucial que los jóvenes adquieran estrategias y competencias para realizar una lectura crítica de la información que consumen. Este estudio busca analizar el comportamiento del alumnado de secundaria ante la información falsa y el efecto de una intervención didáctica, realizada online durante la pandemia de la covid-19, cuyo objetivo era que el alumnado desarrollara competencias para detectar noticias falsas. Se trata de una investigación participativa con un diseño de pre-test y post-test. Los resultados muestran que el alumnado incrementó su competencia para identificar algunos tipos de falsedad como la información no probada y la información tergiversada, si bien tuvo problemas para reconocer información descontextualizada o el uso de lenguaje discriminatorio. Las estrategias que más utilizó son la comprobación de datos en internet y el uso de verificadores. Se observaron comportamientos diferenciados entre el alumnado que identificó la información falsa y el que no lo hizo. Las conclusiones apuntan a la necesidad de trabajar en el aula de forma integral, extensiva y transversal la evaluación de la información partiendo de las habilidades que el alumnado ya posee.
Open Access
Addressing the impact of surface roughness on epsilon-near-zero silicon carbide substrates
(American Chemical Society, 2023) Navajas Hernández, David; Pérez Escudero, José Manuel; Martínez Hernández, María Elena; Goicoechea Fernández, Javier; Liberal Olleta, Íñigo; Ingeniería Eléctrica, Electrónica y de Comunicación; Institute of Smart Cities - ISC; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren
Epsilon-near-zero (ENZ) media have been very actively investigated due to their unconventional wave phenomena and strengthened nonlinear response. However, the technological impact of ENZ media will be determined by the quality of realistic ENZ materials, including material loss and surface roughness. Here, we provide a comprehensive experimental study of the impact of surface roughness on ENZ substrates. Using silicon carbide (SiC) substrates with artificially induced roughness, we analyze samples whose roughness ranges from a few to hundreds of nanometer size scales. It is concluded that ENZ substrates with roughness in the few nanometer scale are negatively affected by coupling to longitudinal phonons and strong ENZ fields normal to the surface. On the other hand, when the roughness is in the hundreds of nanometers scale, the ENZ band is found to be more robust than dielectric and surface phonon polariton (SPhP) bands.
Open Access
Comparison of modified Soret lenses for dual band integrated detectors
(IEEE, 2020) Torres García, Alicia E.; Pérez Escudero, José Manuel; Gonzalo García, Ramón; Ederra Urzainqui, Íñigo; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren; Institute of Smart Cities - ISC; Ingeniería Eléctrica, Electrónica y de Comunicación
This paper presents the comparison of different modified Soret lenses suitable for a millimeter and submillimeterwave dualband integrated pixel detectors. The approach is based on the modification of a printed planar Soret lens, designed to operate in the sub-mm range, to obtain an antenna at the millimeter region. Three modifications of a transmission-mode Soret Lens at 850 GHz based on spiral, logarithmic and meander antennas geometries have been analyzed with a combination of Kirchhoffs Diffraction and full-wave simulation methods. The performance of the designs has been experimentally demonstrated in the submillimeterwave band, showing good agreement with simulation results.
Open Access
Spectrally stable thermal emitters enabled by material-based high-impedance surfaces
(Royal Society of Chemistry, 2023) Navajas Hernández, David; Pérez Escudero, José Manuel; Liberal Olleta, Íñigo; Ingeniería Eléctrica, Electrónica y de Comunicación; Institute of Smart Cities - ISC; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren
Radiative thermal engineering with subwavelength metallic bodies is a key element for heat and energy management applications, communication and sensing. Here, we numerically and experimentally demonstrate metallic thermal emitters with narrowband but extremely stable emission spectra, whose resonant frequency does not shift with changes on the nanofilm thickness, the angle of observation and/or polarization. Our devices are based on epsilon-near-zero (ENZ) substrates acting as material-based high-impedance substrates. They do not require from complex nanofabrication processes, thus being compatible with large-area and low-cost applications.
Open Access
A gap waveguide-based compact rectangular waveguide to a packaged microstrip inline transition
(MDPI, 2020) Pérez Escudero, José Manuel; Torres García, Alicia E.; Gonzalo García, Ramón; Ederra Urzainqui, Íñigo; Institute of Smart Cities - ISC
In this paper two different simple to design and easy to manufacturing transitions from a microstrip to rectangular waveguide based on ridge and groove gap waveguides are studied. The first one is based on a combination of a groove and ridge gap waveguide. In this case, the microstrip substrate occupies the whole bottom metallic housing block, namely, the transition and the gap between the bed of nails and the lid; therefore, it does not require any substrate shaping. Nevertheless, the transition needs to replace groove waveguide by ridge gap waveguide sections to avoid higher-order mode excitation. In the second approach, based on only a groove gap waveguide, the substrate is shaped to be only in the microstrip section, that is, outside the bed of nails area. This leads to a simplification of the design procedure. Prototypes of both transitions have been characterized, showing good agreement with the simulations taking into account the manufacturing tolerances. Performance comparable to the state-of-the-art in this frequency band has been achieved.
Open Access
A simplified design inline microstrip-to-waveguide transition
(MDPI, 2018) Ederra Urzainqui, Íñigo; Gonzalo García, Ramón; Pérez Escudero, José Manuel; Torres García, Alicia E.; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren; Institute of Smart Cities - ISC; Ingeniería Eléctrica, Electrónica y de Comunicación
A simplified design of an inline transition between microstrip and rectangular waveguide is presented in this paper. The transition makes use of a dielectric filled rectangular waveguide (DFRW) as an intermediate step, which simplifies manufacturing and allows for an analytical design. The behavior of the transition has been experimentally validated in the W-band by means of a back-to-back configuration. Good performance has been achieved: a return loss greaterthan 10 dB and mean insertion loss lower than 1 dB.
Open Access
Design of a slotted Substrate Integrated waveguide antenna using a metasurface
(IEEE, 2021) Chocarro Álvarez, Javier; Pérez Escudero, José Manuel; Ederra Urzainqui, Íñigo; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren; Institute of Smart Cities - ISC; Ingeniería Eléctrica, Electrónica y de Comunicación; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
In this paper, the use of a metasurface to improve the radiation properties of a Substrate Integrated Waveguide based slotted antenna is proposed. The design process of a metasurface covered 8 element slot antenna array following a Chebyshev distribution is presented and its performance is compared with that of a conventional one. The results demonstrate the improvement in the radiation performance that can be achieved, without affecting the bandwidth.
Open Access
Suppressed-scattering spectral windows for radiative cooling applications
(Optica, 2023) Pérez Escudero, José Manuel; Torres García, Alicia E.; Lezaun Capdevila, Carlos; Caggiano, Antonio; Peralta, Ignacio; Dolado, Jorge S.; Beruete Díaz, Miguel; Liberal Olleta, Íñigo; Ingeniería Eléctrica, Electrónica y de Comunicación; Institute of Smart Cities - ISC; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren
The scattering of light by resonant nanoparticles is a key process for enhancing the solar reflectance in daylight radiative cooling. Here, we investigate the impact of material dispersion on the scattering performance of popular nanoparticles for radiative cooling applications. We show that, due to material dispersion, nanoparticles with a qualitatively similar response at visible frequencies exhibit fundamentally different scattering properties at infrared frequencies. It is found that dispersive nanoparticles exhibit suppressed-scattering windows, allowing for selective thermal emission within a highly reflective sample. The existence of suppressed-scattering windows solely depends on material dispersion, and they appear pinned to the same wavelength even in random composite materials and periodic metasurfaces. Finally, we investigate calcium-silicate-hydrate (CSH), the main phase of concrete, as an example of a dispersive host, illustrating that the co-design of nanoparticles and host allows for tuning of the suppressed-scattering windows. Our results indicate that controlled nanoporosities would enable concrete with daylight passive radiative cooling capabilities.
Open Access
Silicon integrated subharmonic mixer on a photonic-crystal platform
(IEEE, 2021) Torres García, Alicia E.; Pérez Escudero, José Manuel; Teniente Vallinas, Jorge; Gonzalo García, Ramón; Ederra Urzainqui, Íñigo; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren; Institute of Smart Cities - ISC; Ingeniería Eléctrica, Electrónica y de Comunicación
This paper presents a planar silicon integrated subharmonic mixer on top of a photonic-crystal platform. The local oscillator (LO) power is injected through a 2D photoniccrystal (PC) slab to a resonant cavity that effectively couples the signal to a planar bow-tie antenna. The same antenna, which is printed on the top of the PC cavity, contains an antiparallel Schottky diode pair which performs the down-conversion. The proposed design is a simple, easy to integrate, low cost, low profile device. Moreover, the described fabrication process is compatible with active components integration. The performance of the design has been experimentally demonstrated showing good agreement with the simulation and is comparable with the stateof-the-art of planar mixers. The work presented here is based on concepts and technologies from electronics and photonics domains and may be a good starting point for the creation of new devices, allowing the integration and upgrading of existing techniques from both worlds.