Open Access
Fully metallic Luneburg metalens antenna in gap waveguide technology at V-band
(IEEE, 2023) Pérez Quintana, Dayan; Bilitos, Christos; Ruiz-García, Jorge; Ederra Urzainqui, Íñigo; Teniente Vallinas, Jorge; González-Ovejero, David; Beruete Díaz, Miguel; Institute of Smart Cities - ISC
This article presents the design of a flat Luneburg metalens antenna at V-band using gap waveguide (GW) technology. The metalens consists of a parallel plate waveguide (PPW) loaded with metallic pins whose height is modulated to get an effective refractive index that follows the Luneburg equation. A Groove GW (GGW) H-plane horn is used to illuminate the metalens, such that the rays are collimated and a planar wavefront is generated in the direction of propagation. Since the structure at hand is planar, it can be efficiently integrated on flat surfaces. Moreover, the fully metallic structure is mechanically robust and presents lower losses than lenses including dielectric substrates. A prototype has been fabricated and tested, simulations and experimental results are in very good agreement. The metalens yields an input reflection coefficient (S11) below −10 dB from 45 to 70 GHz, whereas the −3 dB gain fractional bandwidth is 26.2% with respect to a center frequency of 60 GHz, with a peak of 22.5 dB at 61 GHz. These features make this design an interesting solution for millimeter-wave (MMW) applications.
Open Access
Flat lens antenna using gap waveguide technology at millimeter waves
(IEEE, 2021) Pérez Quintana, Dayan; Bilitos, Christos; Ruiz-García, Jorge; González-Ovejero, David; Beruete Díaz, Miguel; Ingeniería Eléctrica, Electrónica y de Comunicación; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren
In this paper, a flat lens antenna using Gap Waveguide (GW) technology working in the millimeter waves band was designed. The metamaterial lens is fed using a Groove Gap Waveguide (GGW) horn antenna in order to achieve a plane wavefront at broadside. Both devices, metalens and GGW antenna achieve excellent radiation results when combined together. Due to metallic composition, the structure presents more robustness, low loss, and adaptability to a flat surface, able to be used in millimeter wave application.
Open Access
Liquid crystals in reconfigurable reflectarray antennas for sub-millimeter waves
(IEEE, 2024-08-21) Pérez Quintana, Dayan; Aguirre Gallego, Erik; Olariaga Jauregui, Eduardo; Kuznetsov, Sergei A.; Lapanik, Valeri I.; Sutormin, Vitaly S.; Zyryanov, Victor Ya; Marcotegui Iturmendi, José Antonio; Beruete Díaz, Miguel; Ingeniería Eléctrica, Electrónica y de Comunicación; Ingeniaritza Elektrikoa, Elektronikoa eta Telekomunikazio Ingeniaritza; Institute of Smart Cities - ISC
Accelerated technological progress responds to the dynamic evolution of wireless communication systems, fueled by the advent of 5G, the emergence of 6G, and the pervasive integration of the IoT paradigm. Smart antennas play a pivotal role in this advancement, facilitating electronic beam steering to meet escalating demands for enhanced bandwidth and elevated operating frequencies. The spotlight shifts to reconfigurable reflectarray antennas, gaining prominence over conventional phased arrays. Notably, liquid crystals (LCs) emerge as a promising avenue for creating electronically reconfigurable/switchable reflectarrays, specifically tailored for short millimeter and terahertz waves. LCs, as a unique aggregate state combining solid and liquid features, address current technology limitations. Their uniaxial nature and the ability to manipulate molecule orientation enable effective fine-tuning of dielectric permittivity without drawbacks present in existing technologies.
Open Access
Compact bull's-eye antenna in ridge gap waveguide with circular polarization at 60 GHz
(IEEE, 2021) Pérez Quintana, Dayan; Ederra Urzainqui, Íñigo; Beruete Díaz, Miguel; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren; Institute of Smart Cities - ISC; Ingeniería Eléctrica, Electrónica y de Comunicación
In this work, a Bull's-Eye (BE) antenna with circular polarization (CP) based on ridge gap waveguide (RGW) technology, working in the millimeter-wave band (60 GHz) is numerically and experimentally demonstrated. The structure is coupled through a step transition to a ridge-line that ends in two orthogonal arms of different lengths to generate CP. The wave is coupled to the top plate by a central diamond slot surrounded by the BE structure, which consists of four concentric periodic corrugations around the slot. Simulations and experimental results are in good agreement, with practical bandwidth of 6.8% with respect to center frequency and peak gain of 18.4 dB. The antenna has right-handed CP (RHCP) with polarization discrimination of more than 30 dB.
Open Access
Bull’s-eye antenna with circular polarization at millimeter waves based on ridge gap waveguide technology
(IEEE, 2021) Pérez Quintana, Dayan; Ederra Urzainqui, Íñigo; Beruete Díaz, Miguel; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren; Institute of Smart Cities - ISC; Ingeniería Eléctrica, Electrónica y de Comunicación
In this communication, a Bull’s-Eye (BE) antenna with circular polarization (CP) based on ridge gap waveguide (RGW) technology is numerically and experimentally demonstrated. The structure is excited from the bottom with a standard WR-15 waveguide (V -band) coupled through a step transition to a ridgeline that ends in two orthogonal arms of different lengths to generate CP. Radiation is coupled to the top plate by a central diamond slot surrounded by the BE structure, which consists of four concentric periodic corrugations around the slot. Simulations and experimental results are in good agreement, with axial ratio below 1 dB at the operation frequency and peak gain of 18.4 dB. The antenna has right-handed CP (RHCP) with polarization discrimination of more than 30 dB.
Open Access
Compact pillbox reflector based on geodesic lens
(IEEE, 2022) Pérez Quintana, Dayan; Chen, Q.; Beruete Díaz, Miguel; Quevedo-Teruel, O.; Ingeniería Eléctrica, Electrónica y de Comunicación; Institute of Smart Cities - ISC; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren
We propose a pillbox antenna in combination with a geodesic lens at 60 GHz. The antenna is implemented in a dual-layer parallel plate waveguide. The waves from a geodesic lens in a first layer, after being reflected by a parabolic mirror connecting the rims of the two layers, enter a second layer and illuminate the radiation aperture. Since the lens produces a virtual focus, the reflector works as if it is fed from that a further location, making the system more compact.
Open Access
Hyperbolic lens antenna in groove gap waveguide technology at sub-millimeter waves
(IEEE, 2022) Pérez Quintana, Dayan; Biurrun Quel, Carlos; Ederra Urzainqui, Íñigo; González-Ovejero, David; Beruete Díaz, Miguel; Ingeniería Eléctrica, Electrónica y de Comunicación; Institute of Smart Cities - ISC; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren
In this paper, a flat hyperbolic lens antenna using Groove Gap Waveguide (GGW) technology is designed at 300 GHz. A GGW horn antenna is used to feed the metamaterial lens placed in a parallel plate waveguide (PPW), in order to increase the directivity in the direction of propagation. The combination of both devices, the metalens and the GGW antenna, achieves excellent radiation performance.
Open Access
Wideband circularly-polarized gap waveguide-based antenna design
(IEEE, 2025-03-12) Leoz-Beltrán, Iñigo; Iriarte Galarregui, Juan Carlos; Pérez Quintana, Dayan; Teberio Berdún, Fernando; Beruete Díaz, Miguel; Ederra Urzainqui, Íñigo; Ingeniería Eléctrica, Electrónica y de Comunicación; Ingeniaritza Elektrikoa, Elektronikoa eta Telekomunikazio Ingeniaritza
This paper presents the design of an all-metal antenna based on Gap Waveguide technology. The antenna, which is realized using a Ridge Gap Waveguide, consists of just two layers, maintaining a compact size. The first layer is made up of two perpendicularly placed arms, which comprise the feeding, and the second layer hosts a diamond shaped slot and a horn, which comprise the radiator. Simulations show that the design achieves a remarkable bandwidth equivalent to the 31.43% of the central frequency in terms of both S11 parameter, being below -10 dB, and Axial Ratio, being below 3 dB.
Open Access
Reconfigurable millimeter-wave reflectarray based on low loss liquid crystals
(IEEE, 2024) Pérez Quintana, Dayan; Aguirre Gallego, Erik; Olariaga Jauregui, Eduardo; Kuznetsov, Sergei A.; Lapanik, Valeri I.; Sutormin, Vitaly S.; Zyryanov, Victor Ya; Marcotegui Iturmendi, José Antonio; Beruete Díaz, Miguel; Ingeniería Eléctrica, Electrónica y de Comunicación; Ingeniaritza Elektrikoa, Elektronikoa eta Telekomunikazio Ingeniaritza; Institute of Smart Cities - ISC
This article reports on the development and evaluation of a reconfigurable millimeter-wave reflectarray (RA) based on liquid-crystal (LC) substrate operating in the D-band (105–125 GHz). The RA is composed of a high-impedance surface (HIS) with a meta-array of 33 × 29 patches on a 2-mm-thick quartz substrate, separated from the ground plane (GP) by a 40-µm-thick LC layer. A novel LC composition with low dielectric losses (<0.003) and high dielectric anisotropy (>1.3) has been developed for operation at millimeter waves. The results demonstrate a reflection phase tunability of 210◦ and low insertion losses of 2.5 dB. Furthermore, the device was demonstrated as a proof of concept for 1-D beam-steering applications, exhibiting an operational bandwidth of 12 GHz.