Socorro Leránoz, Abián Bentor

Loading...
Profile Picture

Email Address

Birth Date

Job Title

Last Name

Socorro Leránoz

First Name

Abián Bentor

person.page.departamento

Ingeniería Eléctrica, Electrónica y de Comunicación

person.page.instituteName

ISC. Institute of Smart Cities

person.page.observainves

person.page.upna

Name

Search Results

Now showing 1 - 8 of 8
  • PublicationOpen Access
    Sensors based on thin-film coated cladding removed multimode optical fiber and single-mode multimode single-mode fiber: a comparative study
    (Hindawi Publishing Corporation, 2015) Del Villar, Ignacio; Socorro Leránoz, Abián Bentor; Hernáez Sáenz de Zaitigui, Miguel; Corres Sanz, Jesús María; Ruiz Zamarreño, Carlos; Sánchez Zábal, Pedro; Arregui San Martín, Francisco Javier; Matías Maestro, Ignacio; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
    Two simple optical fibre structures that do not require the inscription of a grating, a cladding removed multimode optical fibre (CRMOF) and a single-mode multimode single-mode structure (SMS), are compared in terms of their adequateness for sensing once they are coated with thin-films.The thin-film deposited (TiO2/PSS) permits increasing the sensitivity to surrounding medium refractive index. The results obtained can be extrapolated to other fields such as biological or chemical sensing just by replacing the thin-film by a specific material.
  • PublicationOpen Access
    Direct functionalization of TiO2/PSS sensing layer for an LMR-based optical fiber reusable biosensor
    (IEEE, 2023) Santano Rivero, Desiree; Socorro Leránoz, Abián Bentor; Del Villar, Ignacio; Ingeniería Eléctrica, Electrónica y de Comunicación; Institute of Smart Cities - ISC; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa, PJUPNA2033
    Functionalization plays a crucial role in the development of biosensors. In this study, bioreceptors were directly immobilized onto the surface of a sensing layer after physical activation, avoiding the need for longer and more complex functionalization systems. This direct immobilization was applied to an optical sensing platform based on lossy mode resonances (LMRs) generated by a thin-film of titanium (IV) dioxide/poly(sodium 4-styrenesulfonate) (TiO 2 /PSS). To generate the LMR, a 200-micron bare optical fiber was coated with TiO 2 /PSS using the layer-by-layer self-assembly technique. The PSS of the sensing layer was then physically activated using either UV-ozone or plasma to immobilize anti-rabbit IgG bioreceptors. This enabled specific and label-free detection of rabbit IgG concentrations ranging from 0.002 to 2 mg/ml. The results presented in this work include real-time detection of rabbit IgG, a comparison between the two activation techniques (UV-ozone and plasma), and an analysis of the biosensor’s reusability over four consecutive cycles, which demonstrates the promising potential of the TiO 2 /PSS sensing layer for biosensing applications.
  • PublicationOpen Access
    Lossy mode resonance based microfluidic platform developed on planar waveguide for biosensing applications
    (MDPI, 2022) Benítez Pérez, Melanys; Zubiate Orzanco, Pablo; Del Villar, Ignacio; Socorro Leránoz, Abián Bentor; Matías Maestro, Ignacio; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren; Institute of Smart Cities - ISC; Ingeniería Eléctrica, Electrónica y de Comunicación; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
    The development of resonance phenomena-based optical biosensors has gained relevance in recent years due to the excellent optical fiber properties and progress in the research on materials and techniques that allow resonance generation. However, for lossy mode resonance (LMR)-based sensors, the optical fiber presents disadvantages, such as the need for splicing the sensor head and the complex polarization control. To avoid these issues, planar waveguides such as coverslips are easier to handle, cost-effective, and more robust structures. In this work, a microfluidic LMR-based planar waveguide platform was proposed, and its use for biosensing applications was evaluated by detecting anti-immunoglobulin G (anti-IgG). In order to generate the wavelength resonance, the sensor surface was coated with a titanium dioxide (TiO2) thin-film. IgG antibodies were immobilized by covalent binding, and the detection assay was carried out by injecting anti-IgG in PBS buffer solutions from 5 to 20 μg/mL. The LMR wavelength shifted to higher values when increasing the analyte concentration, which means that the proposed system was able to detect the IgG/anti-IgG binding. The calibration curve was built from the experimental data obtained in three repetitions of the assay. In this way, a prototype of an LMR-based biosensing microfluidic platform developed on planar substrates was obtained for the first time
  • PublicationOpen Access
    Regenerable LMR-based fiber optic immunosensor with a SnO2 metallic oxide thin film for label-free detection
    (Elsevier, 2025-02-02) Santano Rivero, Desiree; Zubiate Orzanco, Pablo; Socorro Leránoz, Abián Bentor; Del Villar, Ignacio; Ingeniería Eléctrica, Electrónica y de Comunicación; Ingeniaritza Elektrikoa, Elektronikoa eta Telekomunikazio Ingeniaritza; Institute of Smart Cities - ISC; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
    This paper introduces the fabrication and characterization of a regenerable LMR-based, label-free optical fiber immunosensor. This innovative biosensor proposal was developed by functionalizing a SnO2 metallic oxide thin film deposited on a D-shaped optical fiber using a silanization protocol. The system successfully detected IgG - anti-IgG complexes in real-time in a range of concentrations from 0.5 to 10 ¿g/ml and achieved a limit of detection (LoD) of 0.12 μg/ml of anti-IgG. The biosensor was extensively tested to assess its capacity for regeneration, confirming that it can be reused repeatedly, reducing the overall cost and waste typically associated with disposable sensors. This regenerability has significant implications for a range of applications, providing a more sustainable and flexible approach to biosensing technology.
  • PublicationOpen Access
    Lossy mode resonance-based optical immunosensor towards detecting gliadin in aqueous solutions
    (Elsevier, 2023) Benítez Pérez, Melanys; Zubiate Orzanco, Pablo; Socorro Leránoz, Abián Bentor; Matías Maestro, Ignacio; Ingeniería Eléctrica, Electrónica y de Comunicación; Institute of Smart Cities - ISC; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
    The development of accurate, intuitive, and easy-to-handle devices to detect different types of allergens is on the rise, as these are useful tools to guarantee consumer safety, which should be a priority for any food industry. Gliadin, one of the main proteins present in gluten, is the one responsible for triggering the immune system to produce autoantibodies in celiac disease, the most dangerous pathology related to gluten. Lossy Mode Resonance (LMR) based biosensors are lately known as a promising sensing technology and its implementation on planar waveguides has been shown to result in manageable, sustainable and robust structures. In this work, an LMR based microfluidic biosensor for gliadin detection is proposed, by coating a coverslip with Titanium Dioxide (TiO2) by Atomic Layer Deposition (ALD) to generate the resonance phenomena and functionalizing the sensor surface with anti-gliadin antibody (AGA) through covalent bond. The sensor was exposed to different gliadin concentrations in ultrapure water, in the range of 0.1–100 ppm with an accuracy of ±0.14 ppm, for a sensitivity of 1.35 ppm/ml. The calibration curve was obtained from the experimental data corresponding to three repetitions of the assay and a limit of detection (LOD) of 0.05 ppm was achieved. Moreover, the sensor was exposed to commercial flour samples, some of them labeled as gluten free (GF) and the response agreed with the expected results according to product label. Biosensor specificity to gliadin was demonstrated by injecting chicken egg white albumin without obtaining any significant response.
  • PublicationOpen Access
    Polymer-functionalized fiber-optic optrode towards the monitoring of breathing parameters
    (Institute of Electrical and Electronics Engineers Inc., 2023) Álvarez-Jiménez, A.; Acha Morrás, Nerea de; Aginaga Etxamendi, Concepción Isabel; Urrutia Azcona, Aitor; Socorro Leránoz, Abián Bentor; Matías Maestro, Ignacio; Ingeniería Eléctrica, Electrónica y de Comunicación; Ingeniaritza Elektrikoa, Elektronikoa eta Telekomunikazio Ingeniaritza; Institute of Smart Cities - ISC
    An innovative application of lossy mode resonances (LMRs) is presented in this work, pursuing the detection of biomedical variables. In this case, the detection of pH and breathing signal events is shown by means of a reflective fiber-optic optrode consisting of a poly(allylamine chloride) / poly (acrylic acid) polymer matrix deposited on the tip of a 200-micron-core bare multimode optical fiber. The proposed sensor is capable of detecting pH values between 6.5 and 8.0 (saliva pH range) with quite stability and repeatability. Moreover, when monitoring the breathing signal, the proposed sensor presents quite good real time detection of the different events occurring during the inspiration-expiration cycle, different breathing rates and detecting apneas.
  • PublicationOpen Access
    Fiber-optic lossy mode resonance sensors
    (Elsevier, 2014) Arregui San Martín, Francisco Javier; Del Villar, Ignacio; Corres Sanz, Jesús María; Goicoechea Fernández, Javier; Ruiz Zamarreño, Carlos; Elosúa Aguado, César; Hernáez Sáenz de Zaitigui, Miguel; Rivero Fuente, Pedro J.; Socorro Leránoz, Abián Bentor; Urrutia Azcona, Aitor; Sánchez Zábal, Pedro; Zubiate Orzanco, Pablo; López Torres, Diego; Acha Morrás, Nerea de; Matías Maestro, Ignacio; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa; Gobierno de Navarra / Nafarroako Gobernua
    In the last 4 years, experimental evidences about the potential use of optical sensors based on Lossy Mode Resonances (LMR) have been presented in the literature. These LMR sensors have some similarities with Surface Plasmon Resonance (SPR) sensors, the gold standard in label-free, real-time biomolecular interaction analysis. In these new LMR sensors, if the non-metallic nanocladding of an optical waveguide fulfills the conditions explained in this work, coupling of light to the cladding modes happens at certain resonance wavelengths, which enables the use of LMR devices as refractometers and opens the door to diverse applications such as in biology and proteomics research. These highly sensitive refractometers have already shown sensitivities higher than 20,000 nm/RIU or 5x10-7 RIU and, given the youth of this field, it is expected to achieve even better values.
  • PublicationOpen Access
    Trends in the design of wavelength-based optical fibre biosensors (2008–2018)
    (Elsevier, 2019) Socorro Leránoz, Abián Bentor; Santano Rivero, Desiree; Del Villar, Ignacio; Matías Maestro, Ignacio; Ingeniaritza Elektrikoa, Elektronikoaren eta Telekomunikazio Ingeniaritzaren; Institute of Smart Cities - ISC; Ingeniería Eléctrica, Electrónica y de Comunicación; Gobierno de Navarra / Nafarroako Gobernua
    During the last decades, both governments and companies have been committed to the continuous checking of biological parameters, which can prevent extra costs to administrations. A very efficient way to address this issue is by designing biosensors. This contribution reviews the advances made using optical fibre technology, which have lately agglutinated much of the scientific interest related to the development of biosensors. However, the wide number of publications describing the use of optical fibre for detecting biomarkers has probably blurred the main goal: obtaining portable, simple, easy-to-handle and cost-effective biosensors. With this purpose, this contribution presents some optical fibre structures which have been analysed in terms of several optical parameters of interest from a photonics point of view: sensitivity, quality factor, full width at half minimum, limit of detection and figure of merit. This has made it possible to classify the most advanced optical fibre sensing techniques and, hence, their suitability when developing biosensing applications.