Sorolla Ayza, Mario

person.page.identifierURI

https://academica-e.unavarra.es/handle/2454/50055

Last Name

Sorolla Ayza

First Name

Mario

person.page.departamento

Ingeniería Eléctrica y Electrónica

person.page.observainves

751225

person.page.upna

484

Full item page

Search Results

Now showing 1 - 10 of 57

Open Access
Lentes metálicas basadas en el fenómeno de transmisión extraordinaria para conseguir índices de refracción negativos
(2009) Navarro Cía, Miguel; Beruete Díaz, Miguel; Sorolla Ayza, Mario; Campillo, Igor; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
In this communication we report plano-concave and bi-concave metamaterial lenses based on the close stack of subwavelegnth hole arrays. Contrary to what is expected from cut-off holes, an engineered array of holes supports Extraordinary Transmission. Moreover, the medium formed when those structures are subwavelength stacked (thus, under metamaterial condition) behaves as a medium with effective negative index of refraction, which allows designing new lenses with properties that were only guessed at not long ago such as perfect imaging, subdiffraction and free-space matching to name a few.
Open Access
Millimeter-wave phase resonances in compound reflection gratings with subwavelength grooves
(Optical Society of America, 2010) Beruete Díaz, Miguel; Navarro Cía, Miguel; Skigin, Diana C.; Sorolla Ayza, Mario; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
Experimental evidence of phase resonances in a dual-period reflection structure comprising three subwavelength grooves in each period is provided in the millimeter-wave regime. We have analyzed and measured the response of these structures and show that phase resonances are characterized by a minimum in the reflected response, as predicted by numerical calculations. It is also shown that under oblique incidence these structures exhibit additional phase resonances not present for normal illumination because of the potentially permitted odd field distribution. A satisfactory agreement between the experimental and numerical reflectance curves is obtained. These results confirm the recent theoretical predictions of phase resonances in reflection gratings in the millimeter-wave regime, and encourage research in this subject due to the multiple potential applications, such as frequency selective surfaces, backscattering reduction and complex-surface-wave-based sensing. In addition, it is underlined here that the response becomes much more complex than the mere infinite analysis when one considers finite periodic structures as in the real experiment.
Open Access
Arrangements of via-holes in microstrip lines as metallodielectric periodic structures
(Wiley, 2000) Gómez Laso, Miguel Ángel; Lopetegui Beregaña, José María; Bacaicoa, Miguel; Hernández, Jorge; Gonzalo García, Ramón; Sorolla Ayza, Mario; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa; Gobierno de Navarra / Nafarroako Gobernua
In this paper, the use of via holes in microstrip lines to design periodic structures that can be regarded as metallodielectric electromagnetic crystals is analyzed. The proposed novel periodic structures achieve a notably increased reflectivity compared to that obtained with a single via hole. Theoretical analysis and experimental results are provided showing a satisfactory performance for these devices as broadband reflectors or short circuits with enhanced behavior at high frequencies.
Open Access
High order mode beam waveguide for technological medium power millimeter wave applications
(1995) Río Bocio, Carlos del; Gonzalo García, Ramón; Marín Pilz, Miguel; Sorolla Ayza, Mario; Möbius, Arnold; Thumm, Manfred; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
The use of medium power millimeter wave CW gyrotrons (10- 30 kW and 30-100 GHz) has several potential applications in advanced materials processing. Since a stochastic field distribution in the applicator is desirable no pencil beam is necessary. Then the possibility to couple the circular symmetric gyrotron output to a higher order free space mode can be considered. Beam waveguides based on iterative reflection of such high order beams on properly designed mirrors opens the possibility to increase the efficiency and to reduce costs of present compact transmission lines in gyrotron technological systems.
Open Access
Estudio de la posibilidad de utilizar modos de orden superior en guías de onda cuasi-ópticas
(1995) Río Bocio, Carlos del; Gonzalo García, Ramón; Marín Pilz, Miguel; Sorolla Ayza, Mario; Möbius, Arnold; Thumm, Manfred; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
The possibility to employ low power gyrotron tubes (10-30 kW, CW) at millimeter wave frequencies (30-100 GHz) has potential applications in advanced ceramic sintering, surface coating, radar, remote sensing, etc.. In materials processing applications, the final shape of the beam is not relevant, because the experiment have to be done in a cavity which has a metallic mode stirrer in order to obtain inside a uniform distribution of the electromagnetic fields. In this paper, we present a preliminar study, showing that it is possible to use high order modes in the transmission line to carry the power to the final experiment efficiently.
Open Access
Comportamiento de propagacion electromagnetica en el apilamiento de agujeros sublambda y agujeros propagantes
(2009) Navarro Cía, Miguel; Beruete Díaz, Miguel; Falcone Lanas, Francisco; Campillo, Igor; Sorolla Ayza, Mario; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
In this work, we provide more insight on the physics underlying the transmission through subwavelength hole arrays metaprism by comparing it with propagating hole arrays prism. We show the critical role that the size of the holes plays in this electromagnetic propagation, changing the effective index of refraction from negative to positive values as the hole diameter increases. This causes negative refraction for the zero-th order emerging beam in the metaprism whereas positive refraction in the non-cut-off holes prism. Experimental results (co- and cross-polar measurements) performed at the V-band of the millimeter waves in the Fresnel zone are well supported by numerical analyses in terms of dispersion diagram, spatial electric field distribution and power flow within the prism along with in the output air zone. As expected, higher order diffracted outgoing beams are recorded for the classical prism but not for the metaprism.
Open Access
Paraxiality considerations of higher order gaussian modes
(1996) Río Bocio, Carlos del; Gonzalo García, Ramón; Sorolla Ayza, Mario; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
Frequently, gaussian modes are used as free space wave equation solutions. This is not true since they are obtained assuming certain paraxial character in them. In this paper, we present an original study of the condition for paraxiality of higher order gaussian modes solutions of the wave equations in free space. A bound for the product of number (k) in free space and the beam waist of a family of modes is obtained, in terms of the mode indexes - the bound being more restrictive the larger the order of the mode.
Open Access
Optimum horn antennas for high order mode beam waveguides
(1995) Río Bocio, Carlos del; Gonzalo García, Ramón; Sorolla Ayza, Mario; Thumm, Manfred; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
Higher order free space modes can be considered as serious candidates for power millimeter wave transmission in advanced material processing by using medium power CW gyrotrons. These modes can be propagated in a beam waveguide with properly designed mirrors. Here, we present some optimal ways to excite these higher order free space modes from circular symmetric cylindrical waveguide modes by using optimal non linear horn launchers. An original synthesis procedure is proposed which has been successfully tested by computational simulation.
Open Access
Measurements of a new gaussian profile corrugated horn antenna for millimeter wave applications
(IEEE, 1998) Gonzalo García, Ramón; Martí Canales, J.; Teniente Vallinas, Jorge; Río Bocio, Carlos del; Sorolla Ayza, Mario; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
The measurements results of a new design of corrugated horn antennas [1, 2, 3] following the gaussian expansion are presented in this paper. The performance of two corrugated horn antennas of this kind was verified in the ESTEC Compact Antenna Test Range (CATR) [4]. Very high agreement between measured and predicted results is found.
Open Access
Negative refraction through an extraordinary transmission left-handed metamaterial slab
(American Physical Society, 2009) Beruete Díaz, Miguel; Navarro Cía, Miguel; Sorolla Ayza, Mario; Campillo, Igor; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa
In this work we present numerical and experimental results of negative refraction through a negative index metamaterial based on miniaturized extraordinary transmission stacked subwavelength hole arrays, also known as stacked fishnet structures, working in the millimeter wave range. Analytical transmittance as a function of frequency and tangential momentum shows the conditions under which negative refraction is expected. Due to the role of the gap-surface-plasmon-polariton-like mode that gives rise to the resonant magnetic response of this structure, strong dispersion with the angle of incidence is expected. Experimental results using a quasioptical bench in the millimeter wave band demonstrate negative refraction and, besides, reasonable agreement with the simulation results is obtained. A discussion based on leaky waves serves to qualitatively explain the main features. The presented results may find application in the design of new lenses and devices both in the microwave, terahertz, and optical ranges.