Buscar
Mostrando ítems 1-10 de 18
Asymmetrically and symmetrically coated tapered optical fiber for sensing applications
(SPIE, 2015)
Contribución a congreso / Biltzarrerako ekarpena,
The deposition of a non-metallic thin-film in a symmetrically coated tapered optical fiber leads to the generation of resonances due to guidance of a mode in the thin-film. At certain conditions, the resonances overlap ...
A comparative study between SMS interferometers and lossy mode resonace optical fiber devices for sensing applications
(SPIE, 2015)
Contribución a congreso / Biltzarrerako ekarpena,
Optical fiber sensors are of great interest due to their intrinsic advantages over electronic sensors. In this work, the
sensing characteristics of two different and novel optical fiber devices are compared, after ...
Tapered single-mode optical fiber pH sensor based on lossy mode resonances generated by a polymeric thin-film
(IEEE, 2012)
Artículo / Artikulua,
Lossy mode resonances can be generated with certain polymeric nanostructures, such as those obtained with a multilayered assembly of poly(allylamine hydrochloride) and poly (acrylic acid). This coating is adsorbed by the ...
Influence of waist length in lossy mode resonances generated with coated tapered single mode optical fibers
(IEEE, 2011)
Artículo / Artikulua,
In this work, the generation of electromagnetic resonances due to the deposition of a nanocoating on a tapered single-mode optical fiber is analyzed. The layer-by-layer technique is used to control the thickness of the ...
Optimization of sensors based on multimode interference in single-mode–multimode– single-mode structure
(IEEE, 2013)
Artículo / Artikulua,
By coating a single-mode–multimode–single-mode
(SMS) structure with a complex refractive index thin-film the central
wavelength of the transmission and attenuation bands of the
optical spectrum can be shifted. By adequate ...
Sensors based on thin-film coated cladding removed multimode optical fiber and single-mode multimode single-mode fiber: a comparative study
(Hindawi Publishing Corporation, 2015)
Artículo / Artikulua,
Two simple optical fibre structures that do not require the inscription of a grating, a cladding removed multimode optical fibre
(CRMOF) and a single-mode multimode single-mode structure (SMS), are compared in terms of ...
Mode transition in complex refractive index coated single-mode–multimode–single-mode structure
(Optical Society of America, 2013)
Artículo / Artikulua,
By coating a single-mode–multimode–single-mode (SMS)
structure with a high refractive index thin-film it is possible to obtain a
transition of modes for specific combinations of thin-film thickness, thinfilm
refractive ...
Refractometric sensors based on multimode interference in a thin-film coated singlemode– multimode–single-mode structure with reflection configuration
(Optical Society of America, 2014)
Artículo / Artikulua,
Thin-film coated single-mode–multimode–single-mode (SMS) structures have been analyzed both theoretically
and experimentally with the aim of detecting different refractive indices. By adequate selection
of the thickness ...
Micro and nanostructured materials for the development of optical fibre sensors
(MDPI, 2017)
info:eu-repo/semantics/article,
The measurement of chemical and biomedical parameters can take advantage of the features
exclusively offered by optical fibre: passive nature, electromagnetic immunity and chemical stability
are some of the most relevant ...
Fiber-optic immunosensor based on lossy mode resonances induced by indium tin oxide thin-films
(IEEE, 2017)
Contribución a congreso / Biltzarrerako ekarpena,
A novel immunosensor based on lossy mode resonances (LMRs) induced in optical fibers is developed in this contribution. Indium tin oxide (ITO) is sputtered on the optical substrate to generate an LMR in the transmission ...