Buscar
Mostrando ítems 11-20 de 24
Micro and nanostructured materials for the development of optical fibre sensors
(MDPI, 2017)
info:eu-repo/semantics/article,
The measurement of chemical and biomedical parameters can take advantage of the features
exclusively offered by optical fibre: passive nature, electromagnetic immunity and chemical stability
are some of the most relevant ...
Fiber-optic immunosensor based on lossy mode resonances induced by indium tin oxide thin-films
(IEEE, 2017)
Contribución a congreso / Biltzarrerako ekarpena,
A novel immunosensor based on lossy mode resonances (LMRs) induced in optical fibers is developed in this contribution. Indium tin oxide (ITO) is sputtered on the optical substrate to generate an LMR in the transmission ...
Tunable electro-optic wavelength filter based on lossy-guided mode resonances
(Optical Society of America, 2013)
info:eu-repo/semantics/article,
In this work an optical fiber tunable filter based on lossy guided-mode resonances (LGMR) is proposed. It consists of a multilayer structure deposited onto the surface of a plastic cladding removed multimode fiber. The ...
Recent developments in fiber optics humidity sensors
(MDPI, 2017)
Artículo / Artikulua,
A wide range of applications such as health, human comfort, agriculture, food processing and storage, and electronic manufacturing, among others, require fast and accurate measurement of humidity. Sensors based on optical ...
Humidity sensor based on Bragg gratings developed on the end facet of an optical fiber by sputtering of one single material
(MDPI, 2017)
Artículo / Artikulua,
The refractive index of sputtered indium oxide nanocoatings has been altered just by changing the sputtering parameters, such as pressure. These induced changes have been exploited for the generation of a grating on the ...
Monitoring the etching process in LPFGs towards development of highly sensitive sensors
(MDPI, 2017)
Contribución a congreso / Biltzarrerako ekarpena,
In this work, the monitoring of the etching process up to a diameter of 30 µm of two LPFG structures has been compared, one of them had initially 125 µm, whereas the second one had 80 µm. By tracking the wavelength shift ...
Optimized strain long-period fiber grating (LPFG) sensors operating at the dispersion turning point
(IEEE, 2018)
Artículo / Artikulua,
Two phenomena for enhancing the sensitivity of longperiod
fiber gratings are combined toward an increase of the sensitivity
to strain of this type of devices: the dispersion turning point
(DTP) and the cladding diameter ...
Increasing the sensitivity of an optic level sensor with a wavelength and phase sensitive single-mode multimode single-mode (SMS) fiber structure
(IEEE, 2017)
Artículo / Artikulua,
The sensitivity of a liquid level sensor based on
a single-mode-multimode-single-mode fiber structure has been
increased by hydrofluoric acid etching. The etching process was
analyzed and monitored both theoretical and ...
Etched LPFGs in reflective configuration for sensitivity and attenuation band depth increase
(IEEE, 2016)
Artículo / Artikulua,
A reflection configuration setup for long-period
fiber gratings is presented. It permits to obtain a unique band
with attenuation double than that obtained in transmission
configuration, which is interesting for ...
Sensitivity optimization with cladding-etched long period fiber gratings at the dispersion turning point
(Optical Society of America, 2016)
Artículo / Artikulua,
This work presents a refractive index sensor based on a long period fiber grating
(LPFG) made in a reduced cladding fiber whose low order cladding modes have the turning
point at large wavelengths. The combination of ...