Buscar
Mostrando ítems 31-40 de 72
Generation of selective fringes with cascaded long-period gratings
(IEEE, 2006)
Artículo / Artikulua,
The inscription of cascaded long-period gratings of
different periods in optical fiber permits us to obtain both narrowband
and wideband filters in the same spectrum. If used as an
optical transducer, it may permit us ...
Wavelength and phase detection based SMS fiber sensors optimized with etching and nanodeposition
(IEEE, 2016)
Artículo / Artikulua,
The development of an optical fiber refractometer by
hydrogen fluoride etching and sputtering deposition of a thin-film
of indium tin oxide on a single-mode-multimode-single-mode fiber
structure has been analyzed with ...
Generation of surface plasmon resonance and lossy mode resonance by thermal treatment of ITO thin-films
(Elsevier, 2014)
Artículo / Artikulua,
Silicon wafers coated with IndiumTinOxide (ITO) by application of sputtering technique have been
characterized after different post-annealing techniques, showing that this last factor is critical for the
quality of the ...
Mode transition in complex refractive index coated single-mode–multimode–single-mode structure
(Optical Society of America, 2013)
Artículo / Artikulua,
By coating a single-mode–multimode–single-mode (SMS)
structure with a high refractive index thin-film it is possible to obtain a
transition of modes for specific combinations of thin-film thickness, thinfilm
refractive ...
Refractometric sensors based on multimode interference in a thin-film coated singlemode– multimode–single-mode structure with reflection configuration
(Optical Society of America, 2014)
Artículo / Artikulua,
Thin-film coated single-mode–multimode–single-mode (SMS) structures have been analyzed both theoretically
and experimentally with the aim of detecting different refractive indices. By adequate selection
of the thickness ...
Nanodeposition of materials with complex refractive index in long period fiber gratings
(IEEE, 2005)
Artículo / Artikulua,
An overlay of higher refractive index than the
cladding is deposited on a Long Period Fiber Grating (LPFG).
This permits to improve in a great manner the sensitivity of the
device to ambient and overlay refractive index ...
ESA-based in-fiber nanocavity for hydrogen–peroxide detection
(IEEE, 2005)
Artículo / Artikulua,
A fiber-optic sensor sensitive to hydrogen peroxide
has been designed based on the electrostatic layer-by-layer selfassembly
method. Prussian blue has been deposited in a polymeric
structure formed by Poly(allylamine ...
Optimization in nanocoated D-shaped optical fiber sensors
(Optical Society of America, 2017)
Artículo / Artikulua,
Nanocoated D-shaped optical fibers have been proven as effective sensors. Here,
we show that the full width at half minimum (FWHM) of lossy mode resonance can be
reduced by optimizing the nanocoating width, thickness and ...
Sensors based on thin-film coated cladding removed multimode optical fiber and single-mode multimode single-mode fiber: a comparative study
(Hindawi Publishing Corporation, 2015)
Artículo / Artikulua,
Two simple optical fibre structures that do not require the inscription of a grating, a cladding removed multimode optical fibre
(CRMOF) and a single-mode multimode single-mode structure (SMS), are compared in terms of ...
Giant sensitivity of optical fiber sensors by means of lossy moderesonance
(Elsevier, 2016)
Artículo / Artikulua,
Here we show an optical refractometer with a giant sensitivity of 304,360 nm per refractive index unit(nm/RIU). This sensitivity corresponds to a resolution of 3.28 × 10−9RIU if a standard optical spectrumanalyzer with a ...