Buscar
Mostrando ítems 1-10 de 42
Improving the width of lossy mode resonances in a reflection configuration D-shaped fiber by nanocoating laser ablation
(Optical Society of America, 2020)
info:eu-repo/semantics/article,
The full width at half maximum (FWHM) of lossy mode resonances (LMRs) in the optical spectrum depends on the homogeneity of the thin film deposited. In this Letter, a method for improving the FWHM is applied for an LMR ...
Wavelength and intensity based lossy mode resonance breathing sensor
(Elsevier, 2021)
info:eu-repo/semantics/article,
Copper oxide (CuO) allows the generation of lossy mode resonance (LMR) in a wide wavelength range of the optical spectrum, both in the visible and the near-infrared (NIR). For this, it is necessary to use a configuration ...
High sensitivity lossy-mode resonance refractometer using low refractive index PFA planar waveguide
(Elsevier, 2023)
Artículo / Artikulua,
In this work a new strategy to improve the sensitivity of refractometers based on lossy-mode resonances has been proved. The proximity of the PFA (tetrafluoroethylene-perfluoro polymer) substrate refractive index to that ...
Electrochemical lossy mode resonance for the detection of manganese ions
(Elsevier, 2023)
Artículo / Artikulua,
In this work we propose electrochemical lossy mode resonance (eLMR) as a powerful method for the detection of manganese (Mn) ions. The sensor is based on a simple planar waveguide (sodasingle bondlime glass coverslip) ...
Planar-waveguide-lmr-based sensors: engineering the depth of characteristic curves
(IEEE, 2023)
Artículo / Artikulua,
Lossy mode resonance (LMR)-based sensors have been proven as one of the exponentially growing research fields since the last decade. These sensors have demonstrated their capabilities in the detection of several physical, ...
Highly sensitive sensor for measuring material thermal expansion using a ring laser
(IEEE, 2023)
Artículo / Artikulua,
A new thermal expansion sensor is presented in this letter. It combines an interferometric fiber sensor and an erbium-doped fiber ring laser as the light source. The sensor consists of a combination of single-mode, ...
Optical fiber vacuum sensor based on etched SMS structure and PDMS coating
(IEEE, 2020)
info:eu-repo/semantics/article,
In this work, an optical fiber vacuum sensor based on a single-mode multimode single-mode (SMS) structure coated with polydimethylsiloxane (PDMS) is studied. The SMS structure generates an interferometric pattern based on ...
Wavelength and phase detection based SMS fiber sensors optimized with etching and nanodeposition
(IEEE, 2016)
Artículo / Artikulua,
The development of an optical fiber refractometer by
hydrogen fluoride etching and sputtering deposition of a thin-film
of indium tin oxide on a single-mode-multimode-single-mode fiber
structure has been analyzed with ...
Mode transition in complex refractive index coated single-mode–multimode–single-mode structure
(Optical Society of America, 2013)
Artículo / Artikulua,
By coating a single-mode–multimode–single-mode (SMS)
structure with a high refractive index thin-film it is possible to obtain a
transition of modes for specific combinations of thin-film thickness, thinfilm
refractive ...
Refractometric sensors based on multimode interference in a thin-film coated singlemode– multimode–single-mode structure with reflection configuration
(Optical Society of America, 2014)
Artículo / Artikulua,
Thin-film coated single-mode–multimode–single-mode (SMS) structures have been analyzed both theoretically
and experimentally with the aim of detecting different refractive indices. By adequate selection
of the thickness ...