Listar Comunicaciones y ponencias de congresos - Biltzarrak eta Argitalpenak por tema "Optical fiber"
Mostrando ítems 1-10 de 10
-
Alfalfa quality detection by means of VIS-NIR optical fiber reflection spectroscopy
A first approach study for the classification of alfalfa (medicago sativa) quality has been performed by means of VIS-NIR optical fiber reflection spectroscopy. Reflection spectral data has been obtained from alfalfa samples ... -
Copper oxide coated D-shaped optical fibers for the development of LMR refractometers
Lossy mode resonance (LMR) based refractometers obtained by means of copper oxide thin-films fabricated onto side-polished (D-shaped) are presented in this work. The high refractive index of copper oxide combined with the ... -
Fiber optic mirror fabrication using general-purpose metallic pigments
In this work, the potential of using general-purpose paints to fabricate highly reflective, low-cost optical mirrors is evaluated. The study shows that high-reflectivity mirrors can be created in standard single-mode fiber ... -
Fiber-optic immunosensor based on lossy mode resonances induced by indium tin oxide thin-films
A novel immunosensor based on lossy mode resonances (LMRs) induced in optical fibers is developed in this contribution. Indium tin oxide (ITO) is sputtered on the optical substrate to generate an LMR in the transmission ... -
Fiber-optic lossy mode resonance sensors
In the last 4 years, experimental evidences about the potential use of optical sensors based on Lossy Mode Resonances (LMR) have been presented in the literature. These LMR sensors have some similarities with Surface ... -
Optical fiber refractometers based on indium tin oxide coatings with response in the visible spectral region
This work presents the fabrication of optical fiber refractometers based on indium tin oxide (ITO) coatings with response in the visible spectral region. ITO thin-films have been sputtered by employing a rotating mechanism ... -
Optical fiber refractometers based on sputtered indium tin oxide coatings
This work presents the fabrication of optical fiber refractometers based on indium tin oxide (ITO) coatings deposited by sputtering with response in the visible spectral region. ITO thin-films have been sputtered by ... -
Optical fiber sensors for asphalt structures monitoring
A novel optical fiber installation method was explored for asphalt monitoring. Glassfiber polymer encapsulated SMF was installed in the intermediate and surface layers in order to study the strain sensitivity with a ... -
Optical fiber vacuum sensor based on modal interferometer and PDMS coating
This work studies the behavior of polydimethylsiloxane (PDMS) as a transducer for optical vacuum pressure measurements. The optical structure chosen for this device is a modal interferometer achieved by splicing a coreless ... -
SnO2 based optical fiber refractometers
In this work, the fabrication and characterization of refractometers based on lossy mode resonances (LMR) is presented. Tin dioxide (SnO2) films deposited on optical fibers are used as the LMR supporting coatings. These ...