• Monitoring structural transformations in metamagnetic shape memory alloys by non-contact GMI technology 

  Beato López, Juan Jesús  ; La Roca, Paulo Matías ; Algueta-Miguel, Jose M.  ; Garayo Urabayen, Eneko  ; Sánchez-Alarcos Gómez, Vicente  ; Recarte Callado, Vicente  ; Gómez Polo, Cristina  ; Pérez de Landazábal Berganzo, José Ignacio   (IOP Publishing, 2023)   Artículo / Artikulua

  Different applications based on metamagnetic shape memory alloy (MSMA) require monitoring the evolution of the martensitic transformation (MT) to optimize the actuation mechanism. To avoid interaction with the active ...

• Nitrogen doped carbon dots as a photocatalyst based on biomass: a life cycle assessment 

  Rodríguez-Carballo, Gabriela; Moreno-Tost, Ramón; Fernandes, Sónia; Esteves da Silva, Joaquim C.G.; Pinto da Silva, Luís; Castro Galiano, Eulogio; Algarra González, Manuel (Elsevier, 2023)   Artículo / Artikulua  

  The effectiveness of various transition metal phosphate-based acid catalysts, including vanadium and niobium, in the hydrothermal synthesis of carbon dots (CDs), has been assessed. Two sources of carbohydrates were employed ...

• Development of ceramic-MOF filters from aluminum saline slags for capturing CO2 

  Torrez Herrera, Jonathan Josué ; Korili , Sophia A.  ; Gil Bravo, Antonio   (Elsevier, 2023)   Artículo / Artikulua  

  This study describes the procedures followed to synthesize ceramic-MOF filters using aluminum saline slag wastes. Briefly, the raw aluminum saline slags were washed at 80 ◦C to significantly reduce the saline content and ...

• Metal-Al layered double hydroxides synthesized from aluminum slags as efficient CO2 adsorbents at pre- and post-combustion temperature 

  Santamaría Arana, Leticia  ; Korili, Sophia A.  ; Gil Bravo, Antonio   (Elsevier, 2023)   Artículo / Artikulua  

  Layered double hydroxides (LDH) have been proposed as the materials that offer the best performance in the moderate-temperature range, between 200 and 450 °C, for CO2 adsorption, so the effect of some synthesis parameters ...

• High-dimensional order-free multivariate spatial disease mapping 

  Vicente Fuenzalida, Gonzalo; Adin Urtasun, Aritz  ; Goicoa Mangado, Tomás; Ugarte Martínez, María Dolores   (Springer, 2023)   Artículo / Artikulua  

  Despite the amount of research on disease mapping in recent years, the use of multivariate models for areal spatial data remains limited due to difficulties in implementation and computational burden. These problems are ...

• Predicting cancer incidence in regions without population-based cancer registries using mortality 

  Retegui Goñi, Garazi; Etxeberria Andueza, Jaione  ; Riebler, Andrea; Ugarte Martínez, María Dolores   (Oxford University Press, 2023)   Artículo / Artikulua  

  Cancer incidence numbers are routinely recorded by national or regional population-based cancer registries (PBCRs). However, in most southern European countries, the local PBCRs cover only a fraction of the country. ...

• Association of intrinsic capacity with incidence and mortality of cardiovascular disease: prospective study in UK Biobank 

  Ramírez Vélez, Robinson; Iriarte-Fernández, María; Santafé Rodrigo, Guzmán  ; Malanda Trigueros, Armando  ; Beard, John R.; García Hermoso, Antonio; Izquierdo Redín, Mikel (Wiley, 2023)   Artículo / Artikulua  

  Background: The World Health Organization proposed the concept of intrinsic capacity (IC; the composite of all the physical and mental capacities of the individual) as central for healthy ageing. However, little research ...

• Tunability of hybrid silica xerogels: surface chemistry and porous texture based on the aromatic precursor 

  Rosales Reina, Beatriz; Cruz Quesada, Guillermo  ; Padilla-Postigo, Nataly; Irigoyen-Razquin, Marian; Alonso-Martínez, Ester; López Ramón, María Victoria; Espinal Viguri, Maialen  ; Garrido Segovia, Julián José   (MDPI, 2023)   Artículo / Artikulua  

  The interest in new materials with specific properties has increased because they are essential for the environmental and technological needs of our society. Among them, silica hybrid xerogels have emerged as promising ...

• CASPT2 study of the electronic structure and photochemistry of protonated N-nitrosodimethylamine (NDMA-H+) at 453 nm 

  Soto, Juan; Peláez, Daniel; Algarra González, Manuel (American Institute of Physics, 2023)   Artículo / Artikulua  

  In this work, we have studied the photodissociation of the protonated derivatives of N-nitrosodimethylamine [(CH3)2N–NO] with the CASPT2 method. It is found that only one of the four possible protonated species of the ...

• Graphene oxide: key to efficient charge extraction and suppression of polaronic transport in hybrids with poly (3-hexylthiophene) nanoparticles 

  Colom, Eduardo; Hernández-Ferrer, Javier; Galán-González, Alejandro; Ansón-Casaos, Alejandro; Navarro-Rodríguez, Mario; Palacios-Lidón, Elisa; Colchero, Jaime; Padilla, Javier; Urbina Yeregui, Antonio; Arenal, Raúl; Benito, Ana M.; Maser, Wolfgang K. (American Chemical Society, 2023)   Artículo / Artikulua  

  Nanoparticles (NPs) of conjugated polymers in intimate contact with sheets of graphene oxide (GO) constitute a promising class of water-dispersible nanohybrid materials of increased interest for the design of sustainable ...

• CO2 methanation over nickel catalysts: support effects investigated through specific activity and operando IR spectroscopy measurement 

  González Rangulan, Vigni Virginia; Reyero Zaragoza, Inés  ; Bimbela Serrano, Fernando  ; Romero Sarria, Francisca; Daturi, Marco; Gandía Pascual, Luis   (MDPI, 2023)   Artículo / Artikulua  

  Renewed interest in CO2 methanation is due to its role within the framework of the Power-to-Methane processes. While the use of nickel-based catalysts for CO2 methanation is well stablished, the support is being subjected ...

• Study of effect of nickel content on tribocorrosion behaviour of nickel-aluminium-bronzes (NABs) 

  Berlanga Labari, Carlos  ; Claver Alba, Adrián  ; Biezma Moraleda, María Victoria; Palacio, José F. (MDPI, 2023)   Artículo / Artikulua  

  The simultaneous existence of mechanical erosion and electrochemical corrosion is a common scenario for engineering alloys used in marine environments, such as pump impellers and valves. Nickel–aluminium–bronzes (NABs) are ...

• A comparative study in the design of TIO2 assisted photocatalytic coatings monitored by controlling hydrophilic behavior and rhodamine b degradation 

  Sandúa Fernández, Xabier; Rivero Fuente, Pedro J.  ; Conde, Ana; Esparza Gorráiz, Joseba; Rodríguez Trías, Rafael   (MDPI, 2023)   Artículo / Artikulua  

  This work presents a comparative study related to the photocatalytic efficiency associated with wettability measurements and organic dye degradation, as well as other relevant properties (i.e., corrosion resistance, ...

• Association of intrinsic capacity with respiratory disease mortality 

  Ramírez Vélez, Robinson; Iriarte-Fernández, María; Santafé Rodrigo, Guzmán  ; Malanda Trigueros, Armando  ; Beard, John R.; García Hermoso, Antonio; Izquierdo Redín, Mikel (Elsevier, 2023)   Artículo / Artikulua

  The World Health Organization (WHO) introduced a framework for healthy aging in 2015 that emphasizes functional ability instead of absence of disease. Healthy ageing is defined as “the process of building and maintaining ...

• Electrical conduction mechanism in carbon-ceramic composites 

  Alcañiz Monge, Juan; Gil-Muñoz, Gema; Trautwein, Guido; Reinoso, Santiago   (Elsevier, 2023)   Artículo / Artikulua

  Carbon-ceramic composites (C/Cer) have been prepared by chemical vapor deposition of coal tar pitch onto clay substrates and characterized by thermogravimetric analyses, powder X-ray diffraction, Raman spectroscopy, and ...

• Uniform convergent expansions of the error function in terms of elementary functions 

  Ferreira González, Chelo ; López García, José Luis  ; Pérez Sinusía, Ester   (Springer, 2023)   Artículo / Artikulua  

  We derive a new analytic representation of the error function erfz in the form of a convergent series whose terms are exponential and rational functions. The expansion holds uniformly in z in the double sector | arg (±z) ...

• Setting a comprehensive strategy to face the runback icing phenomena 

  Mora, Julio; García, Paloma; Carreño, Francisco; González, Miguel; Gutiérrez, Marcos; Montes, Laura; Rico, Victor J.; López-Santos, Carmen; Vicente Gómara, Adrián ; Rivero Fuente, Pedro J.  ; Rodríguez Trías, Rafael  ; Larumbe, Silvia; Acosta, Carolina; Ibáñez-Ibáñez, Pablo; Corozzi, Alessandro.; Raimondo, Mariarosa; Kozera, Rafal; Przybyszewski, Bartlomiej; González-Elipe, Agustín R.; Borrás, Ana; Redondo, Francisco; Agüero, Alina (Elsevier, 2023)   Artículo / Artikulua  

  The development of anti-icing robust surfaces is a hot topic nowadays and particularly crucial in the aeronautics or wind energy sectors as ice accretion can compromise safety and power generation efficiency. However, the ...

• Development of an α′-hydroxy enone for the aminocatalytic asymmetric formal conjugate addition of aldehydes to acrylates, vinyl ketones and acrolein 

  Odriozola Ibarguren, José Manuel  ; Razkin Lizarraga, Jesús; Lorea Revilla, Beñat; Mielgo, Antonia; García Castillo, Jesús María  ; Oiarbide, Mikel; Palomo, Claudio (Royal Society of Chemistry, 2023)   Artículo / Artikulua

  Aminocatalytic asymmetric conjugate addition of aldehydes to Michael acceptors is a well established C-C bond forming methodology. However, various acrylic-type acceptors, including acrylic acid derivatives and acrolein, ...

• Magnetic carbon Fe3O4 nanocomposites synthesized via magnetic induction heating 

  Cervera Gabalda, Laura María ; Gómez Polo, Cristina   (Springer Nature, 2023)   Artículo / Artikulua  

  Magnetic Induction Heating (MIH) of magnetite nanoparticles is employed as a novel synthesis procedure of carbon based magnetic nanocomposites. Magnetic nanoparticles (Fe3O4) and fructose (1:2 weight ratio) were mechanically ...

• Magnetically activated 3D printable polylactic acid/polycaprolactone/magnetite composites for magnetic induction heating generation 

  Galarreta Rodríguez, Itziar; López Ortega, Alberto  ; Garayo Urabayen, Eneko  ; Beato López, Juan Jesús  ; La Roca, Paulo Matías ; Sánchez-Alarcos Gómez, Vicente  ; Recarte Callado, Vicente  ; Gómez Polo, Cristina  ; Pérez de Landazábal Berganzo, José Ignacio   (Springer, 2023)   Artículo / Artikulua  

  Additive manufacturing technology has attracted the attention of industrial and technological sectors due to the versatility of the design and the easy manufacture of structural and functional elements based on composite ...

View more