Listar Artículos de revista INAMAT2 - INAMAT2 aldizkari artikuluak por autor UPNA "Bimbela Serrano, Fernando"
Mostrando ítems 1-11 de 11
-
The 3D-printing fabrication of multichannel silicone microreactors for catalytic applications
Microstructured reactors (MSRs) are especially indicated for highly demanding heterogeneous catalysis due to the small channel dimensions that minimize diffusional limitations and enhance mass and heat transport between ... -
Application of a modeling tool to describe fly ash generation, composition, and melting behavior in a wheat straw fired commercial power plant
Ash behavior is a key operational aspect of industrial-scale power generation by means of biomass combustion. In this work, FactSage™ 6.4 software was used to develop and assess three models of wheat straw combustion in a ... -
CO2 methanation over nickel catalysts: support effects investigated through specific activity and operando IR spectroscopy measurement
Renewed interest in CO2 methanation is due to its role within the framework of the Power-to-Methane processes. While the use of nickel-based catalysts for CO2 methanation is well stablished, the support is being subjected ... -
Comparative study of supported Ni and Co catalysts prepared using the All-in-One method in the hydrogenation of CO2: effects of using (Poly)Vinyl Alcohol (PVA) as an additive
Two series of Ni and Co catalysts supported onto La-Al2O3 were prepared and the CO2 hydrogenation reactions investigated. The catalytic performance was evaluated in terms of the evolution with the reaction temperature of ... -
Effect of oxygen addition, reaction temperature and thermal treatments on syngas production from biogas combined reforming using Rh/alumina catalysts
Dry reforming and partial oxidation of biogas were studied using 0.5 wt.% Rh/Al2O3 catalysts, both inhouse prepared and commercial. The effects of O2 addition on syngas yield and biogas conversion were studied at 700 C ... -
Extraction of phenolic compounds from populus salicaceae bark
Lignocellulosic residues have the potential for obtaining high value-added products that could be better valorized if biorefinery strategies are adopted. The debarking of short-rotation crops yields important amounts of ... -
How bimetallic CoMo carbides and nitrides improve CO oxidation
(Elsevier, 2023) Artículo / ArtikuluaCO elimination is an important step for the proper management of gaseous effluents from various processes, thus avoiding adverse impacts on the environment and human health. In this study, different bimetallic Al2O3-supported ... -
Innovative flow-through reaction system for the sustainable production of phenolic monomers from lignocellulose catalyzed by supported Mo2C
Molybdenum carbide supported on activated carbon (β-Mo2C/AC) has been tested as catalyst in the reductive catalytic fractionation (RCF) of lignocellulosic biomass both in batch and in Flow-Through (FT) reaction systems. ... -
Performance comparison between washcoated and packed-bed monolithic reactors for the low-temperature Fischer-Tropsch synthesis
Washcoating and packing of Co-Re catalyst particles have been employed as structuring methods of parallel channel monoliths used in the low-temperature Fischer-Tropsch synthesis (FTS). These methods were compared with ... -
Production of aromatic compounds by catalytic depolymerization of technical and downstream biorefinery lignins
Lignocellulosic materials are promising alternatives to non-renewable fossil sources when producing aromatic compounds. Lignins from Populus salicaceae., Pinus radiata and Pinus pinaster from industrial wastes and biorefinery ... -
Renewable hydrocarbon production from waste cottonseed oil pyrolysis and catalytic upgrading of vapors with Mo-Co and Mo-Ni catalysts supported on γ-Al2O3
In this work, the production of renewable hydrocarbons was explored by the means of waste cottonseed oil (WCSO) micropyrolysis at 500◦C. Catalytic upgrading of the pyrolysis vapors was studied using α-Al2O3, γ-Al2O3, ...