Buscar
Mostrando ítems 1-10 de 21
A comparative study between SMS interferometers and lossy mode resonace optical fiber devices for sensing applications
(SPIE, 2015)
Contribución a congreso / Biltzarrerako ekarpena,
Optical fiber sensors are of great interest due to their intrinsic advantages over electronic sensors. In this work, the
sensing characteristics of two different and novel optical fiber devices are compared, after ...
Fiber-optic lossy mode resonance sensors
(Elsevier, 2014)
Contribución a congreso / Biltzarrerako ekarpena,
In the last 4 years, experimental evidences about the potential use of optical sensors based on Lossy Mode Resonances (LMR)
have been presented in the literature. These LMR sensors have some similarities with Surface ...
Gas sensor based on lossy mode resonances by means of thin graphene oxide films fabricated onto planar coverslips
(MDPI, 2023)
Artículo / Artikulua,
The use of planar waveguides has recently shown great success in the field of optical sensors based on the Lossy Mode Resonance (LMR) phenomenon. The properties of Graphene Oxide (GO) have been widely exploited in various ...
Generation of lossy mode resonances by deposition of high-refractive-index coatings on uncladded multimode optical fibers
(IOP Publishing Ltd, 2010)
Artículo / Artikulua,
A comparative study of lossy mode resonances generated by depositing two different materials
is presented. The two materials selected are indium tin oxide (ITO) and indium oxide. The two
materials present different ...
Design rules for lossy mode resonance based sensors
(Optical Society of America, 2012)
Artículo / Artikulua,
Lossy mode resonances can be obtained in the transmission spectrum of cladding removed
multimode optical fiber coated with a thin-film. The sensitivity of these devices to changes
in the properties of the coating or the ...
Generation of surface plasmon resonance and lossy mode resonance by thermal treatment of ITO thin-films
(Elsevier, 2014)
Artículo / Artikulua,
Silicon wafers coated with IndiumTinOxide (ITO) by application of sputtering technique have been
characterized after different post-annealing techniques, showing that this last factor is critical for the
quality of the ...
Lossy mode resonance generation with indium tin oxide coated optical fibers for sensing applications
(IEEE, 2010)
Artículo / Artikulua,
Surface plasmon resonances and lossy mode
resonances can be generated with Indium Tin Oxide (ITO)
coated optical fibers. Both phenomena are analyzed and
compared. Lossy mode resonances present important
advantages: ...
SnO2 based optical fiber refractometers
(SPIE, 2012)
Contribución a congreso / Biltzarrerako ekarpena,
In this work, the fabrication and characterization of refractometers based on lossy mode resonances (LMR) is presented. Tin dioxide (SnO2) films deposited on optical fibers are used as the LMR supporting coatings. These ...
Optical fiber refractometers based on indium tin oxide coatings with response in the visible spectral region
(Elsevier, 2011)
Contribución a congreso / Biltzarrerako ekarpena,
This work presents the fabrication of optical fiber refractometers based on indium tin oxide (ITO) coatings with
response in the visible spectral region. ITO thin-films have been sputtered by employing a rotating mechanism ...
Micro and nanostructured materials for the development of optical fibre sensors
(MDPI, 2017)
info:eu-repo/semantics/article,
The measurement of chemical and biomedical parameters can take advantage of the features
exclusively offered by optical fibre: passive nature, electromagnetic immunity and chemical stability
are some of the most relevant ...