Buscar
Mostrando ítems 31-40 de 50
Fabrication of Bragg gratings on the end facet of standard optical fibers by sputtering the same material
(IEEE, 2016)
Artículo / Artikulua,
A sputtering process has been applied to deposit quarter-wavelength stacks on the end facet of cleaved optical fibers by using only one sputtering target. Standard multimode optical fibers were used as substrates to fabricate ...
Micro and nanostructured materials for the development of optical fibre sensors
(MDPI, 2017)
info:eu-repo/semantics/article,
The measurement of chemical and biomedical parameters can take advantage of the features
exclusively offered by optical fibre: passive nature, electromagnetic immunity and chemical stability
are some of the most relevant ...
Fiber-optic lossy mode resonance sensors
(Elsevier, 2014)
Contribución a congreso / Biltzarrerako ekarpena,
In the last 4 years, experimental evidences about the potential use of optical sensors based on Lossy Mode Resonances (LMR)
have been presented in the literature. These LMR sensors have some similarities with Surface ...
Generation of lossy mode resonances with absorbing thin-films
(IEEE, 2010)
Artículo / Artikulua,
The generation of lossy mode resonances with
absorbing thin-films is analyzed with electromagnetic theory. The
main differences with surface plasmon resonances are presented
and some rules are given towards an optimum ...
Sensors based on thin-film coated cladding removed multimode optical fiber and single-mode multimode single-mode fiber: a comparative study
(Hindawi Publishing Corporation, 2015)
Artículo / Artikulua,
Two simple optical fibre structures that do not require the inscription of a grating, a cladding removed multimode optical fibre
(CRMOF) and a single-mode multimode single-mode structure (SMS), are compared in terms of ...
Detection of ethanol in human breath using optical fiber long period grating coated with metal-organic frameworks
(MDPI, 2017)
Contribución a congreso / Biltzarrerako ekarpena,
An optical fiber sensor for ethanol detection in exhaled breath has been developed. It has been fabricated by functionalizing a Long Period Grating with a metal-organic framework, ZIF-8. The sensor’s response was tested ...
Monitoring the etching process in LPFGs towards development of highly sensitive sensors
(MDPI, 2017)
Contribución a congreso / Biltzarrerako ekarpena,
In this work, the monitoring of the etching process up to a diameter of 30 µm of two LPFG structures has been compared, one of them had initially 125 µm, whereas the second one had 80 µm. By tracking the wavelength shift ...
Generation of lossy mode resonances by deposition of high-refractive-index coatings on uncladded multimode optical fibers
(IOP Publishing Ltd, 2010)
Artículo / Artikulua,
A comparative study of lossy mode resonances generated by depositing two different materials
is presented. The two materials selected are indium tin oxide (ITO) and indium oxide. The two
materials present different ...
Optimization of sensors based on multimode interference in single-mode–multimode– single-mode structure
(IEEE, 2013)
Artículo / Artikulua,
By coating a single-mode–multimode–single-mode
(SMS) structure with a complex refractive index thin-film the central
wavelength of the transmission and attenuation bands of the
optical spectrum can be shifted. By adequate ...
Experimental demonstration of lossy mode resonance generation for transverse-magnetic and transverse-electric polarizations
(Optica Publishing Group, 2013)
Artículo / Artikulua,
This Letter, presents the fabrication of lossy mode resonance (LMR) devices based on titanium dioxide (TiO2)/ poly(sodium 4-styrenesulfonate) (PSS) coatings deposited on side-polished D-shaped optical fibers. TiO2 thin ...