Buscar
Mostrando ítems 1-10 de 25
Multi-sensing platform design with a grating-based nanostructure on a coverslip substrate
(Springer, 2023)
Contribución a congreso / Biltzarrerako ekarpena,
Two different thin film designs with a grating pattern are simulated on a soda lime coverslip, which acts as optical waveguide, with the purpose of generating both a lossy mode resonance (LMR) in transmission and reflection ...
Integrated platform for microfluidics based cell culture applications
(Springer, 2023)
Contribución a congreso / Biltzarrerako ekarpena,
The ongoing developments in the field of microfluidics-based cell culture have led to a significant interest in systems for their visualization and control. The existing cell culture systems are limiting due to cost, ...
Optical fiber vacuum sensor based on modal interferometer and PDMS coating
(IEEE, 2019)
info:eu-repo/semantics/conferenceObject,
This work studies the behavior of polydimethylsiloxane (PDMS) as a transducer for optical vacuum pressure measurements. The optical structure chosen for this device is a modal interferometer achieved by splicing a coreless ...
Fiber-based label-free D-dimer detection for early diagnosis of venous thromboembolism
(SPIE, 2020)
info:eu-repo/semantics/conferenceObject,
D-dimer is a useful diagnostic biomarker for deep vein thrombosis or pulmonary embolism, collectively referred to as venous thromboembolism (VTE). The ability to detect in real-time the amount of D-dimer with a fast and ...
Lossy mode resonances biosensor for the detection of C-reactive protein
(Optica Publishing Group, 2016)
Contribución a congreso / Biltzarrerako ekarpena,
The fabrication and characterization of optical fiber biosensor based on Lossy Mode Resonances (LMR) to detect C-reactive protein (CRP) are presented. Indium tin oxide (ITO) coatings deposited on side-polished D-shaped ...
Monitoring the etching process in LPFGs towards development of highly sensitive sensors
(MDPI, 2017)
Contribución a congreso / Biltzarrerako ekarpena,
In this work, the monitoring of the etching process up to a diameter of 30 µm of two LPFG structures has been compared, one of them had initially 125 µm, whereas the second one had 80 µm. By tracking the wavelength shift ...
Detection of ethanol in human breath using optical fiber long period grating coated with metal-organic frameworks
(MDPI, 2017)
Contribución a congreso / Biltzarrerako ekarpena,
An optical fiber sensor for ethanol detection in exhaled breath has been developed. It has been fabricated by functionalizing a Long Period Grating with a metal-organic framework, ZIF-8. The sensor’s response was tested ...
Smart charging station with photovoltaic and energy storage for supplying electric buses
(IEEE, 2022)
Contribución a congreso / Biltzarrerako ekarpena,
A Smart Charging Station (SCS) has been installed in the Public University of Navarre, Spain, in the framework of the H2020 Smart City Lighthouse STARDUST project. The SCS consists of a high-power electric bus charging ...
Micro sized interdigital capacitor for gases detection based on graphene oxide coating
(Springer, 2023)
Contribución a congreso / Biltzarrerako ekarpena,
A micro sized interdigital capacitor sensible to CO2 and NO is
studied in this work. The photolithography technique enables to obtain fingers
with dimensions of 10 × 500 µm and separated 7 µm between them. The
deposition ...
Integration of second-life battery packs for self-consumption applications: analysis of a real experience
(IEEE, 2021)
Contribución a congreso / Biltzarrerako ekarpena,
This contribution presents a methodology for the integration of Li-ion batteries discarded from electric vehicle into a collective self-consumption installation, showing the technical feasibility of such battery second ...