Listar Artículos de revista DIEC - IEKS Aldizkari artikuluak por autor UPNA "Matías Maestro, Ignacio"
Mostrando ítems 1-20 de 49
-
Ag@Fe3O4-coated U-shaped plastic optical fiber sensor for H2S detection
(Elsevier, 2024) Artículo / ArtikuluaThis work presents the fabrication of U-shaped plastic optical fiber (POF) sensors for hydrogen sulfide (H2S) detection, coated with Fe3O4 nanoparticles synthetized using the Pulsed Laser Ablation in Liquid (PLAL) technique. ... -
All-fiber ellipsometer for nanoscale dielectric coatings
Multiple mode resonance shifts in tilted fiber Bragg gratings (TFBGs) are used to simultaneously measure the thickness and the refractive index of TiO2 thin films formed by Atomic Layer Deposition (ALD) on optical fibers. ... -
Ammonia gas optical sensor based on lossy mode resonances
This letter presents the fabrication and characterization of an ammonia (NH 3) gas optical sensor based on lossy mode resonances (LMRs). A chromium (III) oxide (Cr 2 O 3) thin film deposited onto a planar waveguide was ... -
Beyond near-infrared lossy mode resonances with fluoride glass optical fiber
The objective of this Letter consists of the exploration of the lossy mode resonance (LMR) phenomenon beyond the nearinfrared region and specifically in the short wave infrared region (SWIR) and medium wave infrared region ... -
Design and on-field validation of an embedded system for monitoring second-life electric vehicle lithium-ion batteries
In the last few years, the growing demand for electric vehicles (EVs) in the transportation sector has contributed to the increased use of electric rechargeable batteries. At present, lithium-ion (Li-ion) batteries are the ... -
Electrochemical lossy mode resonance for the detection of manganese ions
In this work we propose electrochemical lossy mode resonance (eLMR) as a powerful method for the detection of manganese (Mn) ions. The sensor is based on a simple planar waveguide (sodasingle bondlime glass coverslip) ... -
Etched and nanocoated single-mode multimode single-mode (SMS) fibers for detection of wind turbine gearbox oil degradation
The application of an etching process in a single-mode multimode single-mode (SMS) fiber allows monitoring the change of refractive index of wind turbine gearbox oil due to temperature and degradation with a limitation at ... -
Fabrication of long period gratings by periodically removing the coating of cladding-etched single mode optical fiber towards optical fiber sensor development
Here, we present a novel method to fabricate long period gratings using standard single mode optical fibers (SMF). These optical devices were fabricated in a three-step process, which consisted of etching the SMF, then ... -
Fault detection of planetary gears based on signal space constellations
A new method to process the vibration signal acquired by an accelerometer placed in a planetary gearbox housing is proposed, which is useful to detect potential faults. The method is based on the phenomenological model and ... -
Fiber-based early diagnosis of venous thromboembolic disease by label-free D-dimer detection
D-dimer is a useful diagnostic biomarker for deep vein thrombosis or pulmonary embolism, collectively referred to as venous thromboembolism (VTE). The ability to detect in real-time the amount of D-dimer with a fast and ... -
Gas sensor based on lossy mode resonances by means of thin graphene oxide films fabricated onto planar coverslips
The use of planar waveguides has recently shown great success in the field of optical sensors based on the Lossy Mode Resonance (LMR) phenomenon. The properties of Graphene Oxide (GO) have been widely exploited in various ... -
Generation of lossy mode resonances (LMR) using perovskite nanofilms
The results presented here show for the first time the experimental demonstration of the fabrication of lossy mode resonance (LMR) devices based on perovskite coatings deposited on planar waveguides. Perovskite thin films ... -
Generation of lossy mode resonances in a broadband range with multilayer coated coverslips optimized for humidity sensing
Coverslips deposited with a metallic oxide can be employed for generating lossy mode resonances by lateral incidence of light on the coverslip. Here it is demonstrated that with copper oxide the fading observed with other ... -
Generation of lossy mode resonances in planar waveguides toward development of humidity sensors
Lossy mode resonances (LMRs) are typically obtained with optical fibre. The Kretschmann configuration is an alternative but LMRs are generated with angles approaching grazing incidence. In this work, a new setup is explored, ... -
Generation of lossy mode resonances with different nanocoatings deposited on coverslips
The generation of lossy mode resonances (LMRs) with a setup based on lateral incidence of light in coverslips is a simple platform that can be used for sensing. Here the versatility of this platform is proved by studying ... -
High sensitivity lossy-mode resonance refractometer using low refractive index PFA planar waveguide
In this work a new strategy to improve the sensitivity of refractometers based on lossy-mode resonances has been proved. The proximity of the PFA (tetrafluoroethylene-perfluoro polymer) substrate refractive index to that ... -
Highly sensitive sensor for measuring material thermal expansion using a ring laser
A new thermal expansion sensor is presented in this letter. It combines an interferometric fiber sensor and an erbium-doped fiber ring laser as the light source. The sensor consists of a combination of single-mode, ... -
Improving the width of lossy mode resonances (LMRs) in double-clad fibers
In this work, the characteristics of lossy mode resonances (LMRs) in double-clad fibers where the refractive index (RI) of the second cladding is lower than that of the first cladding are analyzed both numerically and ... -
Improving the width of lossy mode resonances in a reflection configuration D-shaped fiber by nanocoating laser ablation
The full width at half maximum (FWHM) of lossy mode resonances (LMRs) in the optical spectrum depends on the homogeneity of the thin film deposited. In this Letter, a method for improving the FWHM is applied for an LMR ... -
Interdigital concept in photonic sensors based on an array of lossy mode resonances
Multi-parameter detection is key in the domain of sensors. Here it is demonstrated that an indium tin oxide (ITO) nanocoating can be used to generate multiple lossy mode resonances (LMRs) in the optical spectrum. To achieve ...