Listar Artículos de revista DIEC - IEKS Aldizkari artikuluak por tema "Lossy mode resonance"
Mostrando ítems 1-18 de 18
-
A comprehensive review: materials for the fabrication of optical fiber refractometers based on lossy mode resonance
Lossy mode resonance based sensors have been extensively studied in recent years. The versatility of the lossy mode resonance phenomenon has led to the development of sensors based on different configurations that make use ... -
Direct functionalization of TiO2/PSS sensing layer for an LMR-based optical fiber reusable biosensor
Functionalization plays a crucial role in the development of biosensors. In this study, bioreceptors were directly immobilized onto the surface of a sensing layer after physical activation, avoiding the need for longer and ... -
Electrochemical lossy mode resonance for the detection of manganese ions
In this work we propose electrochemical lossy mode resonance (eLMR) as a powerful method for the detection of manganese (Mn) ions. The sensor is based on a simple planar waveguide (sodasingle bondlime glass coverslip) ... -
Fiber-based early diagnosis of venous thromboembolic disease by label-free D-dimer detection
D-dimer is a useful diagnostic biomarker for deep vein thrombosis or pulmonary embolism, collectively referred to as venous thromboembolism (VTE). The ability to detect in real-time the amount of D-dimer with a fast and ... -
Gas detection using LMR-based optical fiber sensors
This work presents a first approach to the utilization of Lossy Mode Resonance (LMR) based optical fiber sensors for gas detection. The optical sensor is based on a SnO2 thin-film fabricated onto the core of cladding ... -
Generation of lossy mode resonances (LMR) using perovskite nanofilms
The results presented here show for the first time the experimental demonstration of the fabrication of lossy mode resonance (LMR) devices based on perovskite coatings deposited on planar waveguides. Perovskite thin films ... -
Generation of lossy mode resonances in a broadband range with multilayer coated coverslips optimized for humidity sensing
Coverslips deposited with a metallic oxide can be employed for generating lossy mode resonances by lateral incidence of light on the coverslip. Here it is demonstrated that with copper oxide the fading observed with other ... -
Generation of lossy mode resonances in planar waveguides toward development of humidity sensors
Lossy mode resonances (LMRs) are typically obtained with optical fibre. The Kretschmann configuration is an alternative but LMRs are generated with angles approaching grazing incidence. In this work, a new setup is explored, ... -
High sensitivity lossy-mode resonance refractometer using low refractive index PFA planar waveguide
In this work a new strategy to improve the sensitivity of refractometers based on lossy-mode resonances has been proved. The proximity of the PFA (tetrafluoroethylene-perfluoro polymer) substrate refractive index to that ... -
LMR-based optical sensor for ethylene detection at visible and mid-infrared regions
Ethylene monitoring has long been a method of controlling the ripening of climacteric fruits, but it turns out that this gas is an important biomarker in biomedical applications. This work presents an optical gas sensor ... -
Lossy mode resonance based microfluidic platform developed on planar waveguide for biosensing applications
The development of resonance phenomena-based optical biosensors has gained relevance in recent years due to the excellent optical fiber properties and progress in the research on materials and techniques that allow resonance ... -
Lossy mode resonance-based optical immunosensor towards detecting gliadin in aqueous solutions
The development of accurate, intuitive, and easy-to-handle devices to detect different types of allergens is on the rise, as these are useful tools to guarantee consumer safety, which should be a priority for any food ... -
Metallic-dielectric layer based hyperbolic mode resonances in planar waveguides
In this research article, we present a comprehensive investigation into the integration of dielectric and metallic layers on optical waveguides, specifically targeting sensing applications. By utilizing a single bilayer ... -
Multichannel refractometer based on lossy mode resonances
In this work a new multiparameter sensor platform based on lossy mode resonances is presented. The structure consists of a soda-lime optical slab waveguide butt-coupled to multimode optical fibers. A variable thickness ... -
Photoisomerization-induced LMR shift for UV radiation detection
(Elsevier, 2024) Artículo / ArtikuluaThis work presents an optical sensor for ultraviolet radiation (UV) detection, based on the combined effects of Lossy Mode Resonance (LMR) in the mid infrared (MIR) spectral region and the photoisomerization of a polymeric ... -
Simultaneous generation of surface plasmon and lossy mode resonances in the same planar platform
A planar waveguide consisting of a coverslip for a microscope glass slide was deposited in one of its two faces with two materials: silver and indium tin oxide (ITO). The incidence of light by the edge of the coverslip ... -
Surface exciton polariton resonances (SEPR)-based sensors
(Elsevier, 2023) Artículo / ArtikuluaA new type of resonance in the development of sensors using long-range surface exciton polariton (LRSEP) phenomena has been coined: surface exciton plasmon resonance (SEPR). The resonance was obtained in the reflected ... -
Trends in the design of wavelength-based optical fibre biosensors (2008–2018)
During the last decades, both governments and companies have been committed to the continuous checking of biological parameters, which can prevent extra costs to administrations. A very efficient way to address this issue ...