Browsing Comunicaciones y ponencias de congresos DIEC - IEKS Biltzarretako komunikazioak eta txostenak by Issue Date
Now showing items 1-20 of 174
-
Integrated platform for microfluidics based cell culture applications
The ongoing developments in the field of microfluidics-based cell culture have led to a significant interest in systems for their visualization and control. The existing cell culture systems are limiting due to cost, ... -
A novel ku-band circularly-polarized horn antenna based on a ridged wall
In this paper, a novel wideband (31.5 % bandwidth) circularly-polarized antenna based on a ridged wall is presented. A pair of ridges on the inner wall of the horn serves as an inbuilt polarizer, which can generate left-hand ... -
Multi-sensing platform design with a grating-based nanostructure on a coverslip substrate
(Springer, 2023) Contribución a congreso / Biltzarrerako ekarpenaTwo different thin film designs with a grating pattern are simulated on a soda lime coverslip, which acts as optical waveguide, with the purpose of generating both a lossy mode resonance (LMR) in transmission and reflection ... -
Building global competencies: a strategic approach to internationalization of engineering education
(Eindhoven University of Technology and Fontys University of Applied Sciences, 2023) Contribución a congreso / Biltzarrerako ekarpenaInternational mobility is an essential aspect of undergraduate education that enables students to acquire the necessary competences required by the European Higher Education Area (EHEA). However, small universities such ... -
Onset of irreversible reactions in overcharging lithium-ion cells: an experimental and modeling approach
Lithium-ion batteries are energy storage systems used in an increasing number of applications. Due to their flammable materials, their use entails risks of fire and explosion. The study of the abuse operation of these ... -
Temperature indicators and overtemperature detection in lithium-ion batteries based on electrochemical impedance spectroscopy
Lithium-ion batteries are the leading technology for energy storage systems due to their attractive advantages. However, the safety of lithium-ion batteries is a major concern, as their operating conditions are limited in ... -
A new ABS conductive material to develop fully 3D-printed patch antennas
Additive manufacturing technology is rapidly overcoming some of its initial limitations and, thus, creating a very useful engineering option for prototyping complex geometries for a wide range of electronic devices. Based ... -
One-year analysis of road condition using FBG arrays
In this work, it is presented an analysis of FBG arrays installed in a public road. The arrays were installed in a newly paved urban road and were monitored for more than one year. The study evidences the permanent deformation ... -
Erbium-doped fiber ring cavity for the measurement of refractive index variations
In this work, an erbium-doped fiber ring cavity based on a 3dB optical coupler for refractive index measurements is presented and experimentally verified. This interrogation system, based on a 1 x 2 optical coupler, uses ... -
Aluminum coated fiber optic sensor for enhancing flow rate measurement
A water flow and velocity aluminum-coated Fiber Bragg Grating sensor system for open channels was designed, simulated and tested. The sensing head was designed, ruggedized and customized to measure velocities at ... -
Fiber optic mirror fabrication using general-purpose metallic pigments
In this work, the potential of using general-purpose paints to fabricate highly reflective, low-cost optical mirrors is evaluated. The study shows that high-reflectivity mirrors can be created in standard single-mode fiber ... -
Measurement of paracetamol concentration using a fiber laser system
A linear fiber laser system for measurements of paracetamol concentration is experimentally demonstrated. The cavity is based on a fiber loop mirror and an FBG centered at 1567.8 nm. The sensing head corresponds to a ... -
Women, Science and Technology Chair—Promoting women’s careers in stem fields
The Chair of Women, Science and Technology of the Universidad Pública de Navarra (UPNA) aims to increase the participation of women in the fields of science and technology. Scientific culture and dissemination are the main ... -
Multicore fiber sensors for strain measurement towards traffic monitoring
In this work, two new interferometric sensors based on multicore optical fibers for the measurement of strain with the ultimate goal of traffic monitoring are presented. The operating principle of each sensor relied on ... -
Outdoor performance of a CdTe based PV generator during 5 years of operation
Together with the huge growth of the traditional crystalline silicon (Si-x) PV manufacturers, other thin-film solar cells have also emerged such as cadmium telluride (CdTe) manufacturers. They are characterized by the ... -
Toroidal inductor design in multilevel DC-DC electric vehicle battery charger including high-frequency effects
Inductor filters, such as the ones implemented in DC-DC buck-boost converters for electric vehicle chargers, have a major impact on the converter weight, volume and cost. Thus, their design is key in order to obtain an ... -
Ordered titanium dioxide nanotubes for lossy-mode resonance-based humidity sensing
Ordered titanium dioxide nanotubes on indium tin oxide as a structure supporting lossy-mode resonance is reported. Capability for application of the structure for optical humidity sensing is shown as an application example. -
Evolutionary algorithms applied to multi-layered radiative cooling metamaterials
A newly design method for designing multi-layered radiative cooling metamaterials based on genetic algorithms (GAs) is exposed. The developed GA has been tested in three cases, resulting in three different structures that ... -
High-yield waveguide diplexer for low-cost E-band 5G point-to-point radio links
This paper presents the design and realization of a high-yield tuning-less waveguide diplexer and a high-gain lens horn antenna for 5G point-to-point fixed-beam communications at the frequency ranges of 71/76 GHz and 81/86 ... -
f-HybridMem: a consensual analysis via fuzzy consensus measures and penalty functions
This paper considers the consensual analysis in decision-making (CDM) processes based on fuzzy logic (FL) and interval-valued fuzzy logic (IVFL), providing a CDM-strategy, by exploring the axiomatic properties of fuzzy ...