Buscar
Mostrando ítems 1-8 de 8
Optical fiber refractometers based on sputtered indium tin oxide coatings
(IEEE, 2011)
Contribución a congreso / Biltzarrerako ekarpena,
This work presents the fabrication of optical fiber
refractometers based on indium tin oxide (ITO) coatings
deposited by sputtering with response in the visible spectral
region. ITO thin-films have been sputtered by ...
Experimental study and sensing applications of polarization-dependent lossy mode resonances generated by D-shape coated optical fibers
(IEEE, 2015)
Artículo / Artikulua,
The fabrication and characterization of an optical fiber refractometer based on Lossy Mode Resonances (LMR) is presented. TiO2/ poly (sodium 4-styrenesulfonate) (PSS) coatings deposited on side-polished D-shaped optical ...
SnO2 based optical fiber refractometers
(SPIE, 2012)
Contribución a congreso / Biltzarrerako ekarpena,
In this work, the fabrication and characterization of refractometers based on lossy mode resonances (LMR) is presented. Tin dioxide (SnO2) films deposited on optical fibers are used as the LMR supporting coatings. These ...
Optical fiber refractometers based on indium tin oxide coatings with response in the visible spectral region
(Elsevier, 2011)
Contribución a congreso / Biltzarrerako ekarpena,
This work presents the fabrication of optical fiber refractometers based on indium tin oxide (ITO) coatings with
response in the visible spectral region. ITO thin-films have been sputtered by employing a rotating mechanism ...
Nanodeposition of materials with complex refractive index in long period fiber gratings
(IEEE, 2005)
Artículo / Artikulua,
An overlay of higher refractive index than the
cladding is deposited on a Long Period Fiber Grating (LPFG).
This permits to improve in a great manner the sensitivity of the
device to ambient and overlay refractive index ...
Etched and nanocoated SMS fiber sensor for detection of salinity concentration
(MDPI, 2017)
Contribución a congreso / Biltzarrerako ekarpena,
An optical fibre refractometer has been developed by etching and deposition of a thin film of indium tin oxide (ITO) on a single-mode-multimode-single-mode (SMS) fibre structure. The interference between modes in this ...
Monitoring the etching process in LPFGs towards development of highly sensitive sensors
(MDPI, 2017)
Contribución a congreso / Biltzarrerako ekarpena,
In this work, the monitoring of the etching process up to a diameter of 30 µm of two LPFG structures has been compared, one of them had initially 125 µm, whereas the second one had 80 µm. By tracking the wavelength shift ...
Route towards a label-free optical waveguide sensing platform based on lossy mode resonances
(IFSA Publishing, 2019)
Artículo / Artikulua,
According to recent market studies of the North American company Allied Market Research, the field
of photonic sensors is an emerging strategic field for the following years and it is expected to garner $18 billion
by ...