Open Access
Hybrid and lanthanide-doped xerogels, and modified titanosilicalites: synthesis, characterisation and application in sensorics and photocatalysis
(2024) Cruz Quesada, Guillermo; Garrido Segovia, Julián José; López Ramón, María Victoria; Espinal Viguri, Maialen; Ciencias; Zientziak; Gobierno de Navarra / Nafarroako Gobernua
La investigación presentada en esta memoria tiene como objetivo preparar xerogeles híbridos de silicio y silicalitas de titanio modificadas, utilizando diversos precursores orgánicos, y estudiar la influencia de su naturaleza en las propiedades texturales y químicas de los nuevos materiales, con el fin de controlar su química superficial y textura, buscando la mayor versatilidad y el material mejor adaptado a la aplicación concreta que se le pretende dar, que son, en este estudio, la preparación de membranas de sensores químicos de fibra óptica y la degradación fotocatalítica de venlafaxina.
Open Access
Hybrid xerogels doped with Tb(III) and Eu (III) and a water soluble Pybox ligand
(2021) Cruz Quesada, Guillermo; Espinal Viguri, Maialen; Garrido Segovia, Julián José; Zientziak; Institute for Advanced Materials and Mathematics - INAMAT2; Ciencias
Hybrid organic-inorganic siliceous materials (ORMOSiLs) are a key focus within the nanoscience area as they combine advantages of inorganic materials without losing characteristics intrinsic of organic molecules. In the past years, our research group has designed hybrid siliceous xerogels (HSXG) with porosities and surface chemistries on demand for a range of applications, such as coatings for optic fiber sensors [1]. Although hybrid xerogels are mainly amorphous materials, recent studies by our group have demonstrated that introducing specific organic fragments on the precursors can induce selforganization during the sol-gel process to obtain a series of transparent nanostructured HSXG [2]. In the present work, a step forward is taken in the applicability of this type of HSXG by doping them with Tb(III) or Eu (III) cations and a water-soluble pybox-based antenna ligand (Pybox-EG= 2,2′-(4-(2-Ethoxyethoxy)pyridine-2,6-diyl)bis(4,5-dihydrooxazole)). Inclusion of photoluminescence will provide the materials with new properties and therefore new applications in fiber optic sensors (FOS) or in solar cells devices.
Open Access
New hybrid organochlorinated xerogels
(2021) Cruz Quesada, Guillermo; Espinal Viguri, Maialen; López Ramón, María Victoria; Garrido Segovia, Julián José; Zientziak; Institute for Advanced Materials and Mathematics - INAMAT2; Ciencias
Hybrid silica xerogels (HSXG) combine the properties of organic and inorganic components in the same material, which makes them promising and versatile candidates for multiple applications. These materials can be easily prepared by the sol-gel process, which offers the possibility to obtain different morphologies. The incorporation of organic precursors plays an important role in their properties, hence, allowing the design of materials for specific applications such as coatings for optical fibers [1]. The aim of this work was to study the influence of the alkyl chain and chlorine atom on the morphological and textural properties of various hybrid materials produced by co-condensation. For this purpose, three series of hybrid xerogels were prepared by co-condensation of TEOS and a chloroalkyltriethoxysilane (TEOS:ClRTEOS, R = methyl, ethyl or propyl) at different molar ratios. The influence of the precursors on the structure and textural properties of the xerogels was studied by means of N2 adsorption, XRD (X-ray diffraction), 29Si NMR (nuclear magnetic resonance) and FE-SEM (Field Emission-scanning electron microscope) [2].
Open Access
Determination of hazardous vapors from the thermal decomposition of organochlorinated silica xerogels with adsorptive properties
(Elsevier, 2024) Rosales Reina, María Beatriz; Cruz Quesada, Guillermo; Pujol, Pablo; Reinoso, Santiago; Elosúa Aguado, César; Arzamendi Manterola, Gurutze; López Ramón, María Victoria; Garrido Segovia, Julián José; Ciencias; Zientziak; Institute for Advanced Materials and Mathematics - INAMAT2; Ingeniería Eléctrica, Electrónica y de Comunicación; Ingeniaritza Elektrikoa, Elektronikoa eta Telekomunikazio Ingeniaritza; Institute of Smart Cities - ISC
The incorporation of organic groups into sol-gel silica materials is known to have a noticeable impact on the properties and structure of the resulting xerogels due to the combination of the properties inherent to the organic fragments (functionality and flexibility) with the mechanical and structural stability of the inorganic matrix. However, the reduction of the inorganic content in the materials could be detrimental to their thermal stability properties, limiting the range of their potential applications. Therefore, this work aims to evaluate the thermal stability of hybrid inorganic-organic silica xerogels prepared from mixtures of tetraethoxysilane and organochlorinated triethoxysilane precursors. To this end, a series of four materials with a molar percentage of organochlorinated precursor fixed at 10%, but differing in the type of organic group (chloroalkyls varying in the alkyl-chain length and chlorophenyl), has been selected as model case study. The gases and vapors released during the thermal decomposition of the samples under N2 atmosphere have been analyzed and their components determined and quantified using a thermogravimetric analyzer coupled to a Fourier-transform infrared spectrophotometer and to a gas chromatography-mass spectrometry unit. These analyses have allowed to identify up to three different thermal events for the pyrolysis of the organochlorinated xerogel materials and to elucidate the reaction pathways associated with such processes. These mechanisms have been found to be strongly dependent on the specific nature of the organic group.
Open Access
Novel silica hybrid xerogels prepared by co-condensation of TEOS and ClPhTEOS: a chemical and morphological study
(MDPI, 2022) Cruz Quesada, Guillermo; Espinal Viguri, Maialen; López Ramón, María Victoria; Garrido Segovia, Julián José; Ciencias; Zientziak; Institute for Advanced Materials and Mathematics - INAMAT2
The search for new materials with improved properties for advanced applications is, nowadays, one of the most relevant and booming fields for scientists due to the environmental and technological needs of our society. Within this demand, hybrid siliceous materials, made out of organic and inorganic species (ORMOSILs), have emerged as an alternative with endless chemical and textural possibilities by incorporating in their structure the properties of inorganic compounds (i.e., mechanical, thermal, and structural stability) in synergy with those of organic compounds (functionality and flexibility), and thus, bestowing the material with unique properties, which allow access to multiple applications. In this work, synthesis using the sol-gel method of a series of new hybrid materials prepared by the co-condensation of tetraethoxysilane (TEOS) and 4-chlorophenyltriethoxysilane (ClPhTEOS) in different molar ratios is described. The aim of the study is not only the preparation of new materials but also their characterization by means of different techniques (FT-IR, 29Si NMR, X-ray Diffraction, and N2/CO2 adsorption, among others) to obtain information on their chemical behavior and porous structure. Understanding how the chemical and textural properties of these materials are modulated with respect to the molar percentage of organic precursor will help to envisage their possible applications: From the most conventional such as catalysis, adsorption, or separation, to the most advanced in nanotechnology such as microelectronics, photoluminescence, non-linear optics, or sensorics.
Open Access
Fe3O4-SiO2 mesoporous core/shell nanoparticles for magnetic field-induced ibuprofen-controlled release
(American Chemical Society, 2022-12-23) García Rodríguez, Lucía; Garayo Urabayen, Eneko; López Ortega, Alberto; Galarreta Rodríguez, Itziar; Cervera Gabalda, Laura María; Cruz Quesada, Guillermo; Cornejo Ibergallartu, Alfonso; Garrido Segovia, Julián José; Gómez Polo, Cristina; Pérez de Landazábal Berganzo, José Ignacio; Ciencias; Zientziak; Institute for Advanced Materials and Mathematics - INAMAT2; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa, PJUPNA2020; Gobierno de Navarra / Nafarroako Gobernua
Hybrid magnetic nanoparticles made up of an iron oxide, Fe3O4, core and a mesoporous SiO2 shell with high magnetization and a large surface area were proposed as an efficient drug delivery platform. The core/shell structure was synthesized by two seed-mediated growth steps combining solvothermal and sol—gel approaches and using organic molecules as a porous scaffolding template. The system presents a mean particle diameter of 30(5) nm (9 nm magnetic core diameter and 10 nm silica shell thickness) with superparamagnetic behavior, saturation magnetization of 32 emu/g, and a significant AC magnetic-field-induced heating response (SAR = 63 W/gFe3O4, measured at an amplitude of 400 Oe and a frequency of 307 kHz). Using ibuprofen as a model drug, the specific surface area (231 m2/g) of the porous structure exhibits a high molecule loading capacity (10 wt %), and controlled drug release efficiency (67%) can be achieved using the external AC magnetic field for short time periods (5 min), showing faster and higher drug desorption compared to that of similar stimulus-responsive iron oxide-based nanocarriers. In addition, it is demonstrated that the magnetic field-induced drug release shows higher efficiency compared to that of the sustained release at fixed temperatures (47 and 53% for 37 and 42 °C, respectively), considering that the maximum temperature reached during the exposure to the magnetic field is well below (31 °C). Therefore, it can be hypothesized that short periods of exposure to the oscillating field induce much greater heating within the nanoparticles than in the external solution.
Open Access
Tuning the sensitivity of photonic sensors toward alkanes through the textural properties of hybrid xerogel coatings
(Wiley, 2025-01-15) Rosales Reina, María Beatriz; López Torres, Diego; Cruz Quesada, Guillermo; Espinal Viguri, Maialen; Elosúa Aguado, César; Reinoso, Santiago; Garrido Segovia, Julián José; Ciencias; Zientziak; Institute for Advanced Materials and Mathematics - INAMAT2; Ingeniería Eléctrica, Electrónica y de Comunicación; Ingeniaritza Elektrikoa, Elektronikoa eta Telekomunikazio Ingeniaritza; Institute of Smart Cities - ISC; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
This work exemplifies how incorporating organosilane modifiers into silica matrices allows for tuning the optical response of reflection photonic sensors through customizing the textural properties of hybrid xerogel sensing films. Xerogels with propyl molar percentages 0, 5, and 10% are used to construct photonic probes (OFS0pTEOS, OFS5pTEOS and OFS10pTEOS, respectively) by dip-coating upon optimizing film deposition parameters. The time response of these probes toward a battery of volatile organic compounds (VOCs) comprising species with different functionality, size-shape, and polarity is systematically analyzed through ON/OFF experiments, revealing that a low propyl content makes the poor-responding OFS0pTEOS film highly sensitive toward non-aromatic, large molecules with low-polar or non-polar character in OFS5pTEOS. This sensor is particularly sensitive toward alkanes, with globular cyclohexane (cyHex) outperforming elongated n-hexane. Variable-temperature calibration curves obtained from step-by-step experiments and adsorption-desorption cycles corroborate these observations and allow hysteresis to be quantified. The response to cyHex closely follows VOC concentration changes with the most stable signal among analytes, leading to well-defined curves with low-to-negligible hysteresis. The isosteric enthalpies of cyHex adsorption are obtained for both the bulk material and the sensor, demonstrating labile adsorbate-adsorbent interactions ruling the sensor response and becoming more exothermic for larger VOC concentrations.
Open Access
Tunability of hybrid silica xerogels: surface chemistry and porous texture based on the aromatic precursor
(MDPI, 2023) Rosales Reina, María Beatriz; Cruz Quesada, Guillermo; Padilla-Postigo, Nataly; Irigoyen-Razquin, Marian; Alonso-Martínez, Ester; López Ramón, María Victoria; Espinal Viguri, Maialen; Garrido Segovia, Julián José; Ciencias; Zientziak; Institute for Advanced Materials and Mathematics - INAMAT2; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
The interest in new materials with specific properties has increased because they are essential for the environmental and technological needs of our society. Among them, silica hybrid xerogels have emerged as promising candidates due to their simple preparation and tunability: when they are synthesised, depending on the organic precursor and its concentration, their properties can be modulated, and thus, it is possible to prepare materials with à la carte porosity and surface chemistry. This research aims to design two new series of silica hybrid xerogels by co-condensation of tetraethoxysilane (TEOS) with triethoxy(p-tolyl)silane (MPhTEOS) or 1,4-bis(triethoxysilyl)benzene (Ph(TEOS)2 and to determine their chemical and textural properties based on a variety of characterisation techniques (FT-IR, 29Si NMR, X-ray diffraction and N2 , CO2 and water vapour adsorption, among others). The information gathered from these techniques reveals that depending on the organic precursor and its molar percentage, materials with different porosity, hydrophilicity and local order are obtained, evidencing the easy modulation of their properties. The ultimate goal of this study is to prepare materials suitable for a variety of applications, such as adsorbents for pollutants, catalysts, films for solar cells or coatings for optic fibre sensors.
Open Access
Hybrid xerogels: study of the sol-gel process and local structure by vibrational spectroscopy
(MDPI, 2021) Cruz Quesada, Guillermo; Espinal Viguri, Maialen; López Ramón, María Victoria; Garrido Segovia, Julián José; Zientziak; Institute for Advanced Materials and Mathematics - INAMAT2; Ciencias; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
The properties of hybrid silica xerogels obtained by the sol-gel method are highly dependent on the precursor and the synthesis conditions. This study examines the influence of organic substituents of the precursor on the sol-gel process and determines the structure of the final materials in xerogels containing tetraethyl orthosilicate (TEOS) and alkyltriethoxysilane or chloroalkyltri-ethoxysilane at different molar percentages (RTEOS and ClRTEOS, R = methyl [M], ethyl [E], or propyl [P]). The intermolecular forces exerted by the organic moiety and the chlorine atom of the precursors were elucidated by comparing the sol-gel process between alkyl and chloroalkyl series. The microstructure of the resulting xerogels was explored in a structural theoretical study using Fourier transformed infrared spectroscopy and deconvolution methods, revealing the distribution of (SiO)4 and (SiO)6 rings in the silicon matrix of the hybrid xerogels. The results demonstrate that the alkyl chain and the chlorine atom of the precursor in these materials determines their inductive and steric effects on the sol-gel process and, therefore, their gelation times. Furthermore, the distribution of (SiO)4 and (SiO)6 rings was found to be consistent with the data from the X-ray diffraction spectra, which confirm that the local periodicity associated with four-fold rings increases with higher percentage of precursor. Both the sol-gel process and the ordered domains formed determine the final structure of these hybrid materials and, therefore, their properties and potential applications.
Open Access
Design of novel photoactive modified titanium silicalites and their application for venlafaxine degradation under simulated solar irradiation
(Wiley, 2024) Cruz Quesada, Guillermo; Sampaio, María J.; Espinal Viguri, Maialen; López Ramón, María Victoria; Garrido Segovia, Julián José; Silva, Cláudia G.; Faria, Joaquim L.; Ciencias; Zientziak; Institute for Advanced Materials and Mathematics - INAMAT2; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa, PJUPNA18-2022
Titanium silicalites (TS) are well-known materials for their use in industrial oxidation reactions, and although they are used as photocatalysts, their activity is limited. Therefore, numerous synthetic strategies are investigated to improve their photocatalytic activity. Herein, three series of modified titanium silicalites are synthesized using three different organotriethoxysilanes at different molar percentages with the aim of modifying the structure of the zeolite, both at a porous and chemical level, to obtain materials with high photocatalytic activity. The study of their morphological, textural, chemical, and UV–vis light absorption properties through various characterization techniques has allowed the selection of the best candidates to test their photoactivity in the degradation of venlafaxine, an antidepressant drug that persists as a contaminant in wastewater and has serious neurotoxic effects. Materials synthesized using a 5% molar percentage of RTEOS and 10% of PhTEOS (Ph = phenyl) are able to degrade venlafaxine, whereas the reference material does not show any photocatalytic activity. These results lead the way to use this synthetic strategy to develop titanium silicates and optimize their photocatalytic activity in degradation reactions of different pollutants.