López Maestresalas, Ainara

Last Name

López Maestresalas

First Name

Ainara

person.page.departamento

Ingeniería

person.page.instituteName

IS-FOOD. Research Institute on Innovation & Sustainable Development in Food Chain

ORCID

0000-0001-6636-0752

person.page.observainves

750902

person.page.upna

810716

Full item page

Search Results

Now showing 1 - 10 of 41

Open Access
Imágenes hiperespectrales para el estudio de la respuesta a los estreses abióticos (deficiencia de riego y abonado) de distintos cultivares de patata
(Ediciones de Horticultura, 2021) López Maestresalas, Ainara; Jarén Ceballos, Carmen; Pérez Roncal, Claudia; Ruiz de Galarreta, José Ignacio; Álvarez, Alba; Barandalla, Leire; Arazuri Garín, Silvia; Ingeniería; Ingeniaritza
El objetivo de este trabajo fue evaluar el potencial de las imágenes hiperespectrales para clasificar tubérculos sometidos a estreses abióticos controlados.
Open Access
Análisis espacio-temporal de los accidentes mortales con tractor en España durante el período 2010-2019
(Interempresas Media, 2023) Arazuri Garín, Silvia; Ibarrola, Alicia; Mangado Ederra, Jesús; Adin Urtasun, Aritz; Arnal Atarés, Pedro; López Maestresalas, Ainara; Jarén Ceballos, Carmen; Estadística, Informática y Matemáticas; Estatistika, Informatika eta Matematika; Ingeniería; Ingeniaritza
El sector agrario y el de la construcción son los que presentan los índices de incidencia de accidentes de trabajo mortales más altos de nuestro país, según los datos recogidos por el Instituto Nacional de Seguridad y Salud en el Trabajo (INSST) (2021) dependiente del Ministerio de Trabajo y Economía Social (Cirauqui, 2022). Si tenemos en cuenta la evolución de estos índices, el sector agrario es el único que no ha mejorado dicho índice desde la aparición de la Ley 31/1995 de prevención de riesgos laborales y su siniestralidad continúa aumentando (Fundación Mapfre 2020). Pero, ¿qué ocurre cuando el accidente lo sufren personas que no encajan en la definición legal de trabajador? Estos accidentes no son considerados 'accidente de trabajo' y, por tanto, escapan a todas las estadísticas y datos oficiales del INSST. Este suele ser el caso de muchos accidentes que sufren personas jubiladas, menores de 16 años, familiares colaboradores, etc. que no son personas vinculadas a la actividad laboral tal y como se define en la legislación. Según Arana et al. (2010) de un total de 388 accidentes mortales ocurridos en España con maquinaria agrícola durante los años 2004-2008, solamente el 61,85% de ellos tuvieron carácter oficial. Las personas mayores fueron el sector de la población con un mayor riesgo, seguidos de los niños y las personas ajenas al sector agrario. La mayoría de las muertes fueron debidas al vuelco de tractores sin estructuras de protección.
Open Access
Mapping acrylamide content in potato chips using near-infrared hyperspectral imaging and chemometrics
(Elsevier, 2025-03-14) Peraza Alemán, Carlos Miguel; López Maestresalas, Ainara; Jarén Ceballos, Carmen; Ruiz de Galarreta, José Ignacio; Barandalla, Leire; Arazuri Garín, Silvia; Ingeniería; Ingeniaritza; Institute on Innovation and Sustainable Development in Food Chain - ISFOOD
This study investigated the potential of near-infrared hyperspectral imaging (NIR-HSI) for the prediction of acrylamide content in potato chips. A total of 300 tubers from two potato varieties (Agria and Jaerla) grown in two seasons and processed under the same frying conditions were analysed. Partial Least Square Regression (PLSR) and Support Vector Machine Regression (SVMR), combined with a logarithmic transformation of the acrylamide levels, were applied to develop predictive models. The most optimal outcomes for PLSR yielded R2 p: 0.85, RMSEP: 201 μg/kg and RPD: 2.53, while for SVMR yielded R2 p: 0.80, RMSEP: 229 μg/kg and RPD: 2.22. Furthermore, the selection of significant wavelengths enabled an 87.95 % reduction in variables without affecting the model’s accuracy. Finally, spatial mapping of acrylamide content was conducted on all chips in the external validation set. This method provides both quantification and visualization capabilities, thus enhancing quality control for acrylamide identification in processed potatoes.
Open Access
Applications of sensing for disease detection
(Springer, 2021) Castro, Ana Isabel de; Pérez Roncal, Claudia; Thomasson, J. Alex; Ehsani, Reza; López Maestresalas, Ainara; Yang, Chenghai; Jarén Ceballos, Carmen; Wang, Tianyi; Cribben, Curtis; Marín Ederra, Diana; Isakeit, Thomas; Urrestarazu Vidart, Jorge; López Molina, Carlos; Wang, Xiwei; Nichols, Robert L.; Santesteban García, Gonzaga; Arazuri Garín, Silvia; Peña, José Manuel; Agronomía, Biotecnología y Alimentación; Agronomia, Bioteknologia eta Elikadura; Estadística, Informática y Matemáticas; Estatistika, Informatika eta Matematika; Ingeniería; Ingeniaritza; Gobierno de Navarra / Nafarroako Gobernua; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
The potential loss of world crop production from the effect of pests, including weeds, animal pests, pathogens and viruses has been quantifed as around 40%. In addition to the economic threat, plant diseases could have disastrous consequences for the environment. Accurate and timely disease detection requires the use of rapid and reliable techniques capable of identifying infected plants and providing the tools required to implement precision agriculture strategies. The combination of suitable remote sensing (RS) data and advanced analysis algorithms makes it possible to develop prescription maps for precision disease control. This chapter shows some case studies on the use of remote sensing technology in some of the world’s major crops; namely cotton, avocado and grapevines. In these case studies, RS has been applied to detect disease caused by fungi using different acquisition platforms at different scales, such as leaf-level hyperspectral data and canopy-level remote imagery taken from satellites, manned airplanes or helicopter, and UAVs. The results proved that remote sensing is useful, effcient and effective for identifying cotton root rot zones in cotton felds, laurel wilt-infested avocado trees and escaaffected vines, which would allow farmers to optimize inputs and feld operations, resulting in reduced yield losses and increased profts.
Open Access
Non-destructive spectroscopy-based technologies for meat and meat product discrimination: a review
(Elsevier, 2025-10-01) León Ecay, Sara; Insausti Barrenetxea, Kizkitza; López Maestresalas, Ainara; Prieto, Nuria; Ingeniería; Ingeniaritza; Agronomía, Biotecnología y Alimentación; Agronomia, Bioteknologia eta Elikadura; Institute on Innovation and Sustainable Development in Food Chain - ISFOOD; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa; Gobierno de Navarra / Nafarroako Gobernua
Consumers' confidence in products of animal origin is highly subjected to the quality guarantees offered by the manufacturing and retail industries. Traditionally, meat quality evaluation has been conducted through destructive, time-consuming and chemical-dependent protocols. Smart methodologies based on the non-destructiveness and/or non-contact with the samples, such as spectroscopy-based technologies, arise as an alternative promising tool. This comprehensive overview includes literature published in the last decade applying spectroscopy-based techniques in the Visible (Vis) and near-infrared (NIR) regions of the spectrum (Vis-NIR), either individually or combined with imaging (hyperspectral imaging, HSI), to classify meat and meat products based on ante- or postmortem factors. First, a brief introduction to the fundamentals of Vis-NIRS and HSI is included. Secondly, the main applications of Vis-NIRS and HSI technologies for meat qualitative purposes only are discussed. The Vis-NIRS and HSI have been successfully used in lab scale studies (> 90 % overall accuracy) to discriminate meat and meat products according to antemortem (feeding system, species, origin and breed) and postmortem (freshness, meat quality, label claims) factors. Recently, spectral data collected with handheld Vis-NIR equipment have become more frequent, although the use of portable HSI has not been widely explored. From the studies reviewed, the main concern regarding spectral data is to shorten modelling handling times, including strategies to both extract optimal wavelengths from NIR and compress spectral data from HSI. Despite the efforts made to overcome instrumentation and data processing challenges, a gap remains to be covered up to a real-time implementation in industrial line quality control.
Open Access
Bulk optical of potato flesh in the 500 – 1900 nm range
(Springer US, 2015) López Maestresalas, Ainara; Aernouts, Ben; Van Beers, Robbe; Arazuri Garín, Silvia; Jarén Ceballos, Carmen; Baerdemaeker, Josse de; Saeys, Wouter; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
In this study, the optical properties of potato flesh tissue were estimated using double-integrating sphere (DIS) measurements combined with an inverse adding-doubling (IAD) light propagation model. Total reflectance, total transmittance, and unscattered transmittance were measured for the wavelength range 500– 1900 nm with 5-nm resolution. From these measurements, the bulk optical properties (absorption coefficient, scattering coefficient, and anisotropy factor) of 53 potato tubers of the Hermes cultivar were estimated. The estimated absorption coefficient spectra were dominated by water and starch absorption bands, the main chemical components of potato tissue. Comparison of these values to those reported in literature for similar products showed comparable absorption profiles. The obtained scattering coefficient spectra showed a smooth decrease from 166 to 160 cm−1 in the near-infrared (NIR) spectral range with increasing wavelength, which is common for biological tissues. The anisotropy factor spectra obtained for the full wavelength range studied ranged between 0.949 and 0.959 with a maximum variability of 0.009 among the set of samples used. The information obtained in this study is essential to understand the effects of absorption and scattering on the propagation of light through the potato tubers in order to design more efficient sensors for non-destructive quality evaluation.
Open Access
Hyperspectral imaging using notions from type-2 fuzzy sets
(Springer, 2019) López Maestresalas, Ainara; Miguel Turullols, Laura de; López Molina, Carlos; Arazuri Garín, Silvia; Bustince Sola, Humberto; Jarén Ceballos, Carmen; Ingeniería; Ingeniaritza; Estadística, Informática y Matemáticas; Estatistika, Informatika eta Matematika; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
Fuzzy set theory has developed a prolific armamentarium of mathematical tools for each of the topics that has fallen within its scope. One of such topics is data comparison, for which a range of operators has been presented in the past. These operators can be used within the fuzzy set theory, but can also be ported to other scenarios in which data are provided in various representations. In this work, we elaborate on notions for type-2 fuzzy sets, specifically for the comparison of type-2 fuzzy membership degrees, to create function comparison operators. We further apply these operators to hyperspectral imaging, in which pixelwise data are provided as functions over a certain energy spectra. The performance of the functional comparison operators is put to the test in the context of in-laboratory hyperspectral image segmentation.
Open Access
Prediction of main potato compounds by NIRS
(AIDIC, 2017) López Maestresalas, Ainara; Pérez Roncal, Claudia; Tierno, Roberto; Arazuri Garín, Silvia; Ruiz de Galarreta, José Ignacio; Jarén Ceballos, Carmen; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
Potato (Solanum tuberosum, L) compounds are generally determined by analytical methods including gasliquid chromatography (GLC), HPLC and UV-VIS spectrophotometry. These methods require a lot of time and are destructive. Therefore, they seem to be not suitable for in-line applications in the food industry. Nearinfrared spectroscopy (NIRS) is a technique that presents some advantages over reference methods for quantitative analysis of agricultural and food products since it is fast, reliable and non-destructive. For this reason, in this study, quantitative analyses were carried out to determine main compounds in potatoes using NIRS. Potato tubers grown in two consecutive years were used for the analyses. NIR spectral acquisition was acquired on lyophilized samples. In year 1, a total of 135 samples were used while 228 samples were used in year 2. Lyophilized samples were also scanned by NIRS, two replicates per samples were acquired and the mean spectrum of each sample was used for the analysis. Different chemical analyses were carried out each year. Thus, in year 1 the following parameters were quantified: reducing sugars (RS) and nitrogen (N), whereas in year 2, total soluble phenolics (TSP) and hydrophilic antioxidant capacity (HAC) were extracted and quantified. Then, chemometric analyses were performed using Unscrambler X (version 10.3, CAMO software AS, Oslo, Norway) to correlate wet chemical analysis with spectral data. Quantitative analyses based on PLS regression models were developed in order to predict the above chemical compounds of tubers in a non-destructive manner. Good PLS regression models were obtained for the prediction of nitrogen and TSP with coefficients of determination (R2) above 0.83. Moreover, PLS models obtained for the estimation of HAC could be used for screening and approximate calibrations.
Open Access
Fatal tractor accidents in the agricultural sector in Spain during the past decade
(MDPI, 2022) Jarén Ceballos, Carmen; Ibarrola, Alicia; Mangado Ederra, Jesús; Adin Urtasun, Aritz; Arnal Atarés, Pedro; López Maestresalas, Ainara; Ríos Eraso, Alonso; Arazuri Garín, Silvia; Ingeniería; Ingeniaritza; Universidad Pública de Navarra / Nafarroako Unibertsitate Publikoa
Currently, there is a discrepancy between the number of occupational accidents in the agricultural sector reported by Spanish governmental sources and those actually occurring in general. This is mainly due to the official definition of ‘occupational accident’ in the current regulations. In order to be able to analyse all fatal accidents involving tractors, other sources of information must therefore be used. In this study, we have collected the news published in different media during the period 2010–2019. Statistical models that take into account the spatial and temporal dependence of the data were used to estimate the rates of fatal accidents in the provinces of Spain using the Bayesian inference technique INLA (Integrated Nested Laplace Approximation). The results obtained showed that the total number of fatal accidents in that period was 644. The crude rates of fatal accidents per province ranged from 0 to 223.5 fatal accidents per 100,000 registered tractors. In addition, the overall rate for Spain as a whole was 6.87 fatal accidents per 100,000 tractors. As in other EU countries, it was found that the regions with the highest number of accidents were also related to steep terrain, to an older tractor fleet and to horticultural crops and vineyards.
Open Access
Proyecto Agroinc: prevención del impacto ambiental de incendios provocados por cosechadoras
(Interempresas Media, 2022) Arazuri Garín, Silvia; Mangado Ederra, Jesús; López Maestresalas, Ainara; López Molina, Carlos; Angulo Muñoz, Blanca; Arnal Atarés, Pedro; Jarén Ceballos, Carmen; Ingeniería; Ingeniaritza; Estadística, Informática y Matemáticas; Estatistika, Informatika eta Matematika; Proyectos e Ingeniería Rural; Landa Ingeniaritza eta Proiektuak; Institute on Innovation and Sustainable Development in Food Chain - ISFOOD; Gobierno de Navarra / Nafarroako Gobernua
Las cosechadoras de cereales, por las condiciones ambientales en las que trabajan, alta temperatura y baja humedad, tanto ambiental como del producto que están cosechando, pueden provocar accidentalmente incendios durante la época de recolección. Los daños económicos y medioambientales que estos incendios suponen pueden ser muy importantes, ya que las condiciones de propagación del fuego son óptimas. Los principales objetivos de este proyecto han sido evaluar el impacto ambiental de los incendios producidos en Navarra en los últimos años y establecer una guía de buenas prácticas para su prevención.