Sorolla Ayza, Mario
Loading...
Email Address
person.page.identifierURI
Birth Date
Job Title
Last Name
Sorolla Ayza
First Name
Mario
person.page.departamento
Ingeniería Eléctrica y Electrónica
person.page.instituteName
ORCID
person.page.observainves
person.page.upna
Name
- Publications
- item.page.relationships.isAdvisorOfPublication
- item.page.relationships.isAdvisorTFEOfPublication
- item.page.relationships.isAuthorMDOfPublication
57 results
Search Results
Now showing 1 - 10 of 57
Publication Open Access SCATTMAT: herramienta C.A.D. para el análisis de componentes en guía de onda circular con variaciones simétricas del radio(1996) Liberal, Antonio; Lahera, Miguel; Río Bocio, Carlos del; Gonzalo García, Ramón; Sorolla Ayza, Mario; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaIn this paper, a C.A.D. tool to simulate simmetrical radial deformation microwave devices, using the modal analysis and scattering matrix techniques is presented. The code has been developed in C++ language, working with Windows resources, in a personal computer. The user can obtain as graphic result the internal evolution of power along the component. The profile component is defined using a 2-D function because of the simmetrical variations. The results have been succesfully tested with experimental results of differents authors.Publication Open Access Mechanical 144GHz beam steering with all-metallic epsilon-near-zero lens antenna(AIP Publishing, 2014) Pacheco-Peña, Víctor; Torres Landívar, Víctor; Orazbayev, Bakhtiyar; Beruete Díaz, Miguel; Navarro Cía, Miguel; Sorolla Ayza, Mario; Engheta, Nader; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta Elektronikoa; Universidad Pública de Navarra / Nafarroako Unibertsitate PublikoaAn all-metallic steerable beam antenna composed of an ε-near-zero (ENZ) metamaterial lens is experimentally demonstrated at 144 GHz (λ0 = 2.083 mm). The ENZ lens is realized by an array of narrow hollow rectangular waveguides working just near and above the cut-off of the TE10 mode. The lens focal arc on the xz-plane is initially estimated analytically as well as numerically and compared with experimental results demonstrating good agreement. Next, an open-ended waveguide is placed along the lens focal arc to evaluate the ENZ-lens antenna steerability. A gain scan loss below 3 dB is achieved for angles up to plus/minus 15º.Publication Open Access Planoconcave lens by negative refraction of stacked subwavelength hole arrays(Optical Society of America, 2008) Beruete Díaz, Miguel; Navarro Cía, Miguel; Sorolla Ayza, Mario; Campillo, Igor; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaThis work presents the design of a planoconcave parabolic negative index metamaterial lens operating at millimeter wavelengths fabricated by using stacked subwavelength hole arrays. A staircase approximation to the ideal parabola profile has been done by removing step by step one lattice in each dimension of the transversal section. Theory predicts power concentration at the focal point of the parabola when the refractive index equals -1. Both simulation and measurement results exhibit an excellent agreement and an asymmetrical focus has been observed. The possibility to design similar planoconcave devices in the terahertz and optical wavelengths could be a reality in the near future.Publication Open Access Línea de transmisión cuasi-óptica con modos gaussianos de orden superior para sistemas basados en gyrotrones tecnológicos para aplicaciones cerámicas(1997) Río Bocio, Carlos del; Gonzalo García, Ramón; Möbius, Arnold; Sorolla Ayza, Mario; Thumm, Manfred; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaIn this paper, a description of a new compact microwave oven system based on a tecnological gyrotron for material processing applications is presented. The whole system has been designed by the Institute of Applied Physics in Nizhny Novgorod (Russia) and nowadays is installed in the Forschungszentrum (Karlsruhe, Germany). It consists ot a technological gyrotron working at 30 GHz giving 10 Kw CW in the TE02 circular waveguide mode, a quasi-optical transmission line (optimized in this work) and the final very oversized cavity or applicator. The original transmission line had a transmission efficiency of about 70%, by using a Vlasov launcher to generate a fundamental gaussian beam from the TE02 mode. The power was driven through a total of three mirrors. The improved design presented here increases the transmission efficiency up to 91%, by using a higher order gaussian beam mode, azimuthaly polarized and conical profile, by using only two ellipsoidal mirrors.Publication Open Access On the determination of the phase center of gaussian horn antennas(1998) Río Bocio, Carlos del; Teniente Vallinas, Jorge; Gonzalo García, Ramón; Sorolla Ayza, Mario; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaGaussian horn antenna designs have experimentally demonstrated excellent performance to produce a very pure Gaussian beam mode with extremely low sidelobes and crosspolarization levels. These results make very attractive these antennas for high performance applications as satellite communications, radar and remote sensing. The particular position of the phase center inside the horn antenna is crucial in the subsequent process to design the mirror system to be illuminated by the antenna. The Gaussian horn antennas, because the feature to excite a Gaussian beam modes, have the phase center close to the horn throat instead of the output horn aperture as usual. This feature is particular of Gaussian horn antennas, and it supposes a change in the design process using these antennas. The mathematical determination, by correlation of the output fields with Gaussian structures, and the numerical demonstration, will be showed in this paper. Also, some considerations of the advantages or disadvantages of this property will be commented.Publication Open Access Measurements of a new gaussian profile corrugated horn antenna for millimeter wave applications(IEEE, 1998) Gonzalo García, Ramón; Martí Canales, J.; Teniente Vallinas, Jorge; Río Bocio, Carlos del; Sorolla Ayza, Mario; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaThe measurements results of a new design of corrugated horn antennas [1, 2, 3] following the gaussian expansion are presented in this paper. The performance of two corrugated horn antennas of this kind was verified in the ESTEC Compact Antenna Test Range (CATR) [4]. Very high agreement between measured and predicted results is found.Publication Open Access Diseño óptimo de antenas de bocina multimodo para excitar un haz gaussiano fundamental de alta pureza(1996) Gonzalo García, Ramón; Río Bocio, Carlos del; Teniente Vallinas, Jorge; Sorolla Ayza, Mario; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaIn this paper, we present an original and optimal multimode horn antenna design to excite the fundamental Gaussian beam from an overmoded waveguide. In particular, we focus the study in overmoded circular corrugated waveguide. The main idea to design this multimode horn antenna, is to increase the waveguide radius as the desired gaussian mode expands. This principle has also been applied to smooth circular waveguides to excite higher order Gaussian beams from TE0n modes. The horn antenna design considered here, improves the gaussian conversion efficiency, the crosspolarisation and the sidelobes level of some good mixture ( aprox. 85% of TE11 and 15% of TM11 ).Publication Open Access New approach to the design of corrugated horn antennas(1997) Gonzalo García, Ramón; Teniente Vallinas, Jorge; Río Bocio, Carlos del; Sorolla Ayza, Mario; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaIn this paper, we present two new corrugated horn antenna designs in circular waveguide. The first one is a converter horn antenna from monomode circular waveguide TE11 to corrugated waveguide HE11 mode in a very efficient way. The conversion efficiency varies between 98 % and 99%. The HE11 mode has highly desired radiation pattern characteristics for applications like satellite communications, radar, remote- sensing, etc, nevertheless, when the requirements are more stringent this mode is not good enough and we must look for other solution. This one corresponds to the fundamental gaussian beam, which has outstanding features, such as being a free space mode, having high matching efficiency with a reflector, no sidelobes, perfect symmetry, etc. The second horn antenna presented generates very efficient fundamental gaussian beams at the output (99%-99.9%). It is important to say that the input must look like a gaussian beam, an HE11 for instance, which presents a 98.4% of gaussian beam or similar. We also show a new design in which we are working now, consisting in the junction of the two aforementioned designs. They form an unique horn antenna that results in the TE11 mode, from the fundamental gaussian beam mode. These components have been analysed using the Mode Matching and the Generalised Scattering Matrix techniques and the Moment Method as well as the equations in [1] to get the far field radiation pattern. Our results have been checked against those obtained by other authors.Publication Open Access The beauty of anisotropy in extraordinary transmission fishnet metamaterials(2011) Navarro Cía, Miguel; Beruete Díaz, Miguel; Sorolla Ayza, Mario; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaIn this work, we explore both numerically and experimentally, the possibility to obtain positive and negative refraction regimes that depend on the wave polarization, exploiting the strong anisotropy of extraordinary transmission fishnet metamaterials.Publication Open Access Regular and anomalous extraordinary optical transmission at the THz-gap(Optical Society of America, 2009) Kuznetsov, Sergei A.; Navarro Cía, Miguel; Kubarev, V. V.; Gelfand, A. V.; Beruete Díaz, Miguel; Campillo, Igor; Sorolla Ayza, Mario; Ingeniería Eléctrica y Electrónica; Ingeniaritza Elektrikoa eta ElektronikoaIn this paper Anomalous Extraordinary Transmission (ET) is reported for s-polarization of low loss doubly periodic subwavelength hole arrays patterned on polypropylene (PP) substrates by conventional contact photolithography at the so-called THz-gap (1-10 THz). The unexpected enhanced transmittance for s-polarization (i.e. without spoof plasmons) was previously numerically demonstrated in subwavelength slits arrays. However, subsequently no experimental work has been devoted to this unexpected Extraordinary Transmission neither in subwavelength slits nor in subwavelength holes. Here, numerical study and experimental results of the Anomalous ET and the symmetric and antisymmetric transmittance modes associated with the already well-known p-polarization ET are shown alongside a systematically analysis of the frequency peaks as a function of hole size for both incident polarizations.