Listar Artículos de revista DING - INGS Aldizkari artikuluak por título
Mostrando ítems 142-161 de 241
-
The law of O-conditionality for fuzzy implications constructed from overlap and grouping functions
Overlap and grouping functions are special kinds of non necessarily associative aggregation operators proposed for many applications, mainly when the associativity property is not strongly required. The classes of overlap ... -
Layer-by-layer nano-assembly: a powerful tool for optical fiber sensing applications
The ability to tune the composition of nanostructured thin films is a hot topic for the design of functional coatings with advanced properties for sensing applications. The control of the structure at the nanoscale level ... -
Lidar-based feedforward control design methodology for tower load alleviation in wind turbines
Minimising tower loads is a key issue for the optimal operation and cost-effective design of wind turbines. Light detection and ranging (LIDAR) technologies enable the measurement of free wind ahead of the rotor and the ... -
Linear uncertain modelling of LIDAR systems for robust wind turbine control design
Light detection and ranging (LIDAR) sensors measure the free wind ahead of the rotor, enabling the use of new feedforward control strategies. However, there exist some sources of error inherent to the measuring process that ... -
Low energy spent coffee grounds briquetting with organic binders for biomass fuel manufacturing
This paper analyzes the ability of the spent coffee grounds (SCG) for briquettes production with xanthan and guar gums as binders. Briquettes were manufactured at room temperature, at 15%, 20%, 25% and 30% of moisture, at ... -
Luminance calibration of a full sky HDR imaging system using sky scanner measurements
A full sky High Dynamic Range imaging system, based on a Single-Lens Reflex camera with a fisheye lens, has been constructed and calibrated with a sky scanner luminance meter. The method considers the geometrical, spectral, ... -
Mapping the research landscape of bauxite by-products (red mud): an evolutionary perspective from 1995 to 2022
The global population growth has significantly impacted energy and raw material consumption, unmatched since the Industrial Revolution. Among metals, aluminium ranks second only to steel, with annual production exceeding ... -
Measuring, modelling and managing gully erosion at large scales: a state of the art
Soil erosion is generally recognized as the dominant process of land degradation. The formation and expansion of gullies is often a highly significant process of soil erosion. However, our ability to assess and simulate ... -
Mechanical performance of AlCrSiN and AlTiSiN coatings on inconel and steel substrates after thermal treatments
The objective of this study was to explore the mechanical properties of AlCrSiN and AlTiSiN coatings deposited on Inconel and steel substrates after thermal treatments of 500 °C and 800 °C. Nanoindentation was used to ... -
Mechanical properties dependency of the pearlite content of ductile iron
(Association for Computational Materials Science and Surface Engineering, 2009) Artículo / Artikulua -
Methodology for the path definition in multi-layer gas metal arc welding (GMAW)
The reconstruction of the geometry of weld-deposited materials plays an important role in the control of the torch path in GMAW. This technique, which is classified as a direct energy deposition technology, is experiencing ... -
Mode-displacement method for structural dynamic analysis of bio-inspired structures: a palm-tree stem subject to wind effects
Biological materials (orthotropic materials), like wood, can offer good mechanical properties with a minimum amount of material, making their internal structure the suitable one to be applied on bio-inspired structures. ... -
Modelado multiplataforma para el control de un sistema articulado
En el presente artículo se ha trabajado con las herramientas de simulación de sistemas mecánicos Gazebo y Simulink, realizando una interconexión entre ambos con el fin de desglosar la parte dinámica y cinemática de la parte ... -
Modeling experimental parameters for the fabrication of multifunctional surfaces composed of electrospun pcl/zno-nps nanofibers
In this work, a one-step electrospinning technique has been implemented for the design and development of functional surfaces with a desired morphology in terms of wettability and corrosion resistance by using polycaprolactone ... -
Modeling of cutting force and final thickness for low stiffness 2024-T3 aluminum alloy part milling considering its geometry and fixtures
The aeronautic industry is facing many challenges regarding the lifetime, weight and accuracy that aircraft skins must comply to meet stringent structural and aerodynamic requirements. Currently, mechanical milling of ... -
Modeling of surface roughness in honing processes by using fuzzy artificial neural networks
Honing processes are abrasive machining processes which are commonly employed to improve the surface of manufactured parts such as hydraulic or combustion engine cylinders. These processes can be employed to obtain a ... -
Modeling of the influence of input AM parameters on dimensional error and form errors in PLA parts printed with FFF technology
As is widely known, additive manufacturing (AM) allows very complex parts to be manufactured with porous structures at a relatively low cost and in relatively low manufacturing times. However, it is necessary to determine ... -
Modeling the flow and mass transport in a mechanically stimulated parametric porous scaffold under fluid-structure interaction approach
Tissue engineering scaffolds combined with bioreactors are used to cultivate cells with the aim of reproducing tissues and organs. The cultivating process is critical due to the delicate in-vitro environment in which the ... -
Modelling of surface finish, electrode wear and material removal rate in electrical discharge machining of hard-to-machine alloys
(2015) Artículo / Artikulua -
Modelling particle transport and deposition in the human healthy and stented tracheobronchial airways
The main goal of this study is the quantification of the particle transport and deposition within the human airways during light, normal and exercise breathing conditions using the computational fluid dynamics. In particular ...