Listar Artículos de revista DIEC - IEKS Aldizkari artikuluak por autor UPNA "Arregui San Martín, Francisco Javier"
Mostrando ítems 1-20 de 23
-
Aluminum doped zinc oxide (AZO) coated optical fiber LMR refractometers. An experimental demonstration
This work presents the experimental demonstration of lossy mode resonance generation by means of aluminum doped zinc oxide thin-films. The use of such material may allow to optimize the performance of LMR-based sensors, ... -
A comprehensive review: materials for the fabrication of optical fiber refractometers based on lossy mode resonance
Lossy mode resonance based sensors have been extensively studied in recent years. The versatility of the lossy mode resonance phenomenon has led to the development of sensors based on different configurations that make use ... -
Development of an aptamer based luminescent optical fiber sensor for the continuous monitoring of Hg2+ in aqueous media
A fluorescent optical fiber sensor for the detection of mercury (Hg2+) ions in aqueous solutions is presented in this work. The sensor was based on a fluorophore-labeled thymine (T)-rich oligodeoxyribonucleotide (ON) ... -
Dual-cavity fiber fabry-perot interferometer coated with SnO2for relative humidity and temperature sensing
An optical fiber tip interferometer for the measurement of relative humidity (RH) and temperature is proposed. The optical fiber structure used, a dual-cavity optical fiber Fabry-Perot interferometer (DFFPI), is ... -
Etched and nanocoated single-mode multimode single-mode (SMS) fibers for detection of wind turbine gearbox oil degradation
The application of an etching process in a single-mode multimode single-mode (SMS) fiber allows monitoring the change of refractive index of wind turbine gearbox oil due to temperature and degradation with a limitation at ... -
Fiber-based early diagnosis of venous thromboembolic disease by label-free D-dimer detection
D-dimer is a useful diagnostic biomarker for deep vein thrombosis or pulmonary embolism, collectively referred to as venous thromboembolism (VTE). The ability to detect in real-time the amount of D-dimer with a fast and ... -
Fiber-optic biosensor based on lossy mode resonances
(Elsevier, 2012) Artículo / Artikulua -
Fluorescent sensors for the detection of heavy metal ions in aqueous media
Due to the risks that water contamination implies for human health and environmental protection, monitoring the quality of water is a major concern of the present era. Therefore, in recent years several efforts have been ... -
Hg2+ optical fiber sensor based on LSPR generated by gold nanoparticles embedded in LBL nano-assembled coatings
Mercury is an important contaminant since it is accumulated in the body of living beings, and very small concentrations are very dangerous in the long term. This paper reports the fabrication of a highly sensitive fiber ... -
In situ synthesis of gold nanoparticles in layer-b y-layer polymeric coatings for the fabrication of optical fiber sensors
A new method is proposed to tune the interferometric response of wavelength-based optical fiber sensors. Using the nanoparticle in situ synthesis (ISS) technique, it is possible to synthesize gold nanoparticles (AuNPs) ... -
Layer-by-layer nano-assembly: a powerful tool for optical fiber sensing applications
The ability to tune the composition of nanostructured thin films is a hot topic for the design of functional coatings with advanced properties for sensing applications. The control of the structure at the nanoscale level ... -
Lossy mode resonance optical sensors based on indium-gallium-zinc oxide thin film
This work discusses an application of electrically conductive and optically transparent indium-gallium-zinc oxide (IGZO) thin films for fabrication of lossy mode resonance (LMR) based optical fiber refractometers. The films ... -
Lossy mode resonances dependence on the geometry of a tapered monomode optical fiber
(Elsevier, 2012) Artículo / Artikulua -
Optical fiber sensors based on microstructured optical fibers to detect gases and volatile organic compounds: a review
Since the first publications related to microstructured optical fibers (MOFs), the development of optical fiber sensors (OFS) based on them has attracted the interest of many research groups because of the market niches ... -
Optical fiber vacuum sensor based on etched SMS structure and PDMS coating
In this work, an optical fiber vacuum sensor based on a single-mode multimode single-mode (SMS) structure coated with polydimethylsiloxane (PDMS) is studied. The SMS structure generates an interferometric pattern based on ... -
Piezotronic, ZnO overlaid Bragg grating organic vapor sensors
We present a zinc oxide (ZnO) out-cladding, overlaid optical fiber Bragg grating sensor, for the detection of vapors of common alcohols and acetone at concentrations lower than 25 ppm while operating at room temperature ... -
Real time measuring system of multiple chemical parameters using microstructured optical fibers based sensors
In this paper, a multiplexing system for simultaneous interrogation of optical fiber sensors which measure different parameters is presented and validated. The whole system has been tested with 6 different sensing heads ... -
Route towards a label-free optical waveguide sensing platform based on lossy mode resonances
According to recent market studies of the North American company Allied Market Research, the field of photonic sensors is an emerging strategic field for the following years and it is expected to garner $18 billion by ... -
Self-referenced optical fiber sensor based on LSPR generated by gold and silver nanoparticles embedded in layer-by-layer nanostructured coatings
In this work, an optical fiber sensor based on the localized surface plasmon resonance (LSPR) phenomenon has been designed for the detection of two different chemical species (mercury and hydrogen peroxide) by using ... -
Self-referenced optical fiber sensor for hydrogen peroxide detection based on LSPR of metallic nanoparticles in layer-by-layer films
Intensity-based optical fiber sensors are one of the most studied sensor approaches thanks to their simplicity and low cost. Nevertheless, their main issue is their lack of robustness since any light source fluctuation, ...