Buscar
Mostrando ítems 21-30 de 57
Wavelength and phase detection based SMS fiber sensors optimized with etching and nanodeposition
(IEEE, 2016)
Artículo / Artikulua,
The development of an optical fiber refractometer by
hydrogen fluoride etching and sputtering deposition of a thin-film
of indium tin oxide on a single-mode-multimode-single-mode fiber
structure has been analyzed with ...
Generation of surface plasmon resonance and lossy mode resonance by thermal treatment of ITO thin-films
(Elsevier, 2014)
Artículo / Artikulua,
Silicon wafers coated with IndiumTinOxide (ITO) by application of sputtering technique have been
characterized after different post-annealing techniques, showing that this last factor is critical for the
quality of the ...
Design rules for lossy mode resonance based sensors
(Optical Society of America, 2012)
Artículo / Artikulua,
Lossy mode resonances can be obtained in the transmission spectrum of cladding removed
multimode optical fiber coated with a thin-film. The sensitivity of these devices to changes
in the properties of the coating or the ...
Mode transition in complex refractive index coated single-mode–multimode–single-mode structure
(Optical Society of America, 2013)
Artículo / Artikulua,
By coating a single-mode–multimode–single-mode (SMS)
structure with a high refractive index thin-film it is possible to obtain a
transition of modes for specific combinations of thin-film thickness, thinfilm
refractive ...
Refractometric sensors based on multimode interference in a thin-film coated singlemode– multimode–single-mode structure with reflection configuration
(Optical Society of America, 2014)
Artículo / Artikulua,
Thin-film coated single-mode–multimode–single-mode (SMS) structures have been analyzed both theoretically
and experimentally with the aim of detecting different refractive indices. By adequate selection
of the thickness ...
Experimental demonstration of lossy mode resonance generation for transverse-magnetic and transverse-electric polarizations
(Optica Publishing Group, 2013)
Artículo / Artikulua,
This Letter, presents the fabrication of lossy mode resonance (LMR) devices based on titanium dioxide (TiO2)/ poly(sodium 4-styrenesulfonate) (PSS) coatings deposited on side-polished D-shaped optical fibers. TiO2 thin ...
Micro and nanostructured materials for the development of optical fibre sensors
(MDPI, 2017)
info:eu-repo/semantics/article,
The measurement of chemical and biomedical parameters can take advantage of the features
exclusively offered by optical fibre: passive nature, electromagnetic immunity and chemical stability
are some of the most relevant ...
Temperature sensor using a multiwavelength erbium-doped fiber ring laser
(Hindawi, 2017)
info:eu-repo/semantics/article,
A novel temperature sensor is presented based on a multiwavelength erbium-doped fiber ring laser.The laser is comprised of fiber
Bragg grating reflectors as the oscillation wavelength selecting filters.The performance of ...
Fiber-optic immunosensor based on lossy mode resonances induced by indium tin oxide thin-films
(IEEE, 2017)
Contribución a congreso / Biltzarrerako ekarpena,
A novel immunosensor based on lossy mode resonances (LMRs) induced in optical fibers is developed in this contribution. Indium tin oxide (ITO) is sputtered on the optical substrate to generate an LMR in the transmission ...
SnO2 based optical fiber refractometers
(SPIE, 2012)
Contribución a congreso / Biltzarrerako ekarpena,
In this work, the fabrication and characterization of refractometers based on lossy mode resonances (LMR) is presented. Tin dioxide (SnO2) films deposited on optical fibers are used as the LMR supporting coatings. These ...