Buscar
Mostrando ítems 21-30 de 37
Tapered single-mode optical fiber pH sensor based on lossy mode resonances generated by a polymeric thin-film
(IEEE, 2012)
Artículo / Artikulua,
Lossy mode resonances can be generated with certain polymeric nanostructures, such as those obtained with a multilayered assembly of poly(allylamine hydrochloride) and poly (acrylic acid). This coating is adsorbed by the ...
Influence of waist length in lossy mode resonances generated with coated tapered single mode optical fibers
(IEEE, 2011)
Artículo / Artikulua,
In this work, the generation of electromagnetic resonances due to the deposition of a nanocoating on a tapered single-mode optical fiber is analyzed. The layer-by-layer technique is used to control the thickness of the ...
Fabrication of Bragg gratings on the end facet of standard optical fibers by sputtering the same material
(IEEE, 2016)
Artículo / Artikulua,
A sputtering process has been applied to deposit quarter-wavelength stacks on the end facet of cleaved optical fibers by using only one sputtering target. Standard multimode optical fibers were used as substrates to fabricate ...
Temperature sensor based on a hybrid ITOsilica resonant cavity
(Optical Society of America, 2015)
Artículo / Artikulua,
Integrated optical devices comprised of multiple material systems are able to achieve unique performance characteristics, enabling applications in sensing and in telecommunications. Due to ease of fabrication, the majority ...
Micro and nanostructured materials for the development of optical fibre sensors
(MDPI, 2017)
info:eu-repo/semantics/article,
The measurement of chemical and biomedical parameters can take advantage of the features
exclusively offered by optical fibre: passive nature, electromagnetic immunity and chemical stability
are some of the most relevant ...
Femtomolar detection by nanocoated fiber label-free biosensors
(ACS, 2018)
Artículo / Artikulua,
The advent of optical fibre-based biosensors combined with that of nanotechnologies has provided an oppor-tunity for developing in situ, portable, lightweight, versatile and high-performance optical sensing platforms. We ...
Indium tin oxide refractometer in the visible and near infrared via lossy mode and surface plasmon resonances with Kretschmann configuration
(AIP Publishing, 2016)
Artículo / Artikulua,
An indium tin oxide (ITO) refractometer based on the generation of lossy mode resonances (LMRs) and surface plasmon resonances (SPRs) is presented. Both LMRs and SPRs are excited, in a single setup, under grazing angle ...
Sensitivity enhancement in low cutoff wavelength long-period fiber gratings by cladding diameter reduction
(MDPI, 2017)
Artículo / Artikulua,
The diameter of long-period fiber gratings (LPFGs) fabricated in optical fibers with a low cutoff wavelength was be reduced by hydrofluoric acid etching, enhancing the sensitivity to refractive index by more than a factor ...
Wavelength and phase detection based SMS fiber sensors optimized with etching and nanodeposition
(IEEE, 2016)
Artículo / Artikulua,
The development of an optical fiber refractometer by
hydrogen fluoride etching and sputtering deposition of a thin-film
of indium tin oxide on a single-mode-multimode-single-mode fiber
structure has been analyzed with ...
Design rules for lossy mode resonance based sensors
(Optical Society of America, 2012)
Artículo / Artikulua,
Lossy mode resonances can be obtained in the transmission spectrum of cladding removed
multimode optical fiber coated with a thin-film. The sensitivity of these devices to changes
in the properties of the coating or the ...