Buscar
Mostrando ítems 1-10 de 12
Generation of lossy mode resonances by deposition of high-refractive-index coatings on uncladded multimode optical fibers
(IOP Publishing Ltd, 2010)
Artículo / Artikulua,
A comparative study of lossy mode resonances generated by depositing two different materials
is presented. The two materials selected are indium tin oxide (ITO) and indium oxide. The two
materials present different ...
Long period fiber gratings with overlay of variable refractive index
(IEEE, 2005)
Artículo / Artikulua,
A theoretical analysis is presented of a long-period
fiber grating (LPFG) with an overlay of variable refractive index.
The highest sensitivity of the resonance wavelengths to variations
in the refractive index of the ...
Generation of lossy mode resonances with absorbing thin-films
(IEEE, 2010)
Artículo / Artikulua,
The generation of lossy mode resonances with
absorbing thin-films is analyzed with electromagnetic theory. The
main differences with surface plasmon resonances are presented
and some rules are given towards an optimum ...
Ultrahigh-sensitivity sensors based on thin-film coated long period gratings with reduced diameter, in transition mode and near the dispersion turning point
(Optical Society of America, 2015)
Artículo / Artikulua,
The mode transition and the dispersion turning point have been
explored for optimization of thin-film coated long period fiber gratings
during the last years. In this work and additional parameter, the cladding
diameter, ...
Experimental demonstration of lossy mode and surface plasmon resonance generation with Kretschmann configuration
(Optical Society of America, 2015)
Artículo / Artikulua,
Lossy mode resonances (LMRs) and surface plasmon resonaces
(SPRs) are obtained experimentally with a Kretschmann
configuration using a BK7 glass prism with all sides polished
and coated with indium tin oxide (ITO). The ...
Optimization in nanocoated D-shaped optical fiber sensors
(Optical Society of America, 2017)
Artículo / Artikulua,
Nanocoated D-shaped optical fibers have been proven as effective sensors. Here,
we show that the full width at half minimum (FWHM) of lossy mode resonance can be
reduced by optimizing the nanocoating width, thickness and ...
Lossy mode resonance generation with indium tin oxide coated optical fibers for sensing applications
(IEEE, 2010)
Artículo / Artikulua,
Surface plasmon resonances and lossy mode
resonances can be generated with Indium Tin Oxide (ITO)
coated optical fibers. Both phenomena are analyzed and
compared. Lossy mode resonances present important
advantages: ...
Optimization of sensors based on multimode interference in single-mode–multimode– single-mode structure
(IEEE, 2013)
Artículo / Artikulua,
By coating a single-mode–multimode–single-mode
(SMS) structure with a complex refractive index thin-film the central
wavelength of the transmission and attenuation bands of the
optical spectrum can be shifted. By adequate ...
Design rules for lossy mode resonance based sensors
(Optical Society of America, 2012)
Artículo / Artikulua,
Lossy mode resonances can be obtained in the transmission spectrum of cladding removed
multimode optical fiber coated with a thin-film. The sensitivity of these devices to changes
in the properties of the coating or the ...
Generation of surface plasmon resonance and lossy mode resonance by thermal treatment of ITO thin-films
(Elsevier, 2014)
Artículo / Artikulua,
Silicon wafers coated with IndiumTinOxide (ITO) by application of sputtering technique have been
characterized after different post-annealing techniques, showing that this last factor is critical for the
quality of the ...