Listar Dpto. Ingeniería Eléctrica y Electrónica - Ingeniaritza Elektriko eta Elektronikoa Saila por autor UPNA "Sánchez Zábal, Pedro"
Mostrando ítems 1-11 de 11
-
Contribución al desarrollo de refractómetros de fibra óptica basados en resonancias de modos con pérdidas
El desarrollo de nuevos materiales y métodos de deposición a escala nanométrica ha supuesto una auténtica revolución en muchas disciplinas de la investigación. En particular, los recubrimientos nanoestructurados permiten ... -
Design rules for lossy mode resonance based sensors
Lossy mode resonances can be obtained in the transmission spectrum of cladding removed multimode optical fiber coated with a thin-film. The sensitivity of these devices to changes in the properties of the coating or the ... -
Fiber-optic lossy mode resonance sensors
In the last 4 years, experimental evidences about the potential use of optical sensors based on Lossy Mode Resonances (LMR) have been presented in the literature. These LMR sensors have some similarities with Surface ... -
Generation of lossy mode resonances by deposition of high-refractive-index coatings on uncladded multimode optical fibers
A comparative study of lossy mode resonances generated by depositing two different materials is presented. The two materials selected are indium tin oxide (ITO) and indium oxide. The two materials present different ... -
Generation of surface plasmon resonance and lossy mode resonance by thermal treatment of ITO thin-films
Silicon wafers coated with IndiumTinOxide (ITO) by application of sputtering technique have been characterized after different post-annealing techniques, showing that this last factor is critical for the quality of the ... -
High sensitive and selective C-reactive protein detection by means of lossy mode resonance based optical fiber devices
This work presents the development of high sensitive, selective, fast and reusable C-reactive protein (CRP) aptasensors. This novel approach takes advantage of the utilization of high sensitive refractometers based on ... -
Indium tin oxide refractometer in the visible and near infrared via lossy mode and surface plasmon resonances with Kretschmann configuration
An indium tin oxide (ITO) refractometer based on the generation of lossy mode resonances (LMRs) and surface plasmon resonances (SPRs) is presented. Both LMRs and SPRs are excited, in a single setup, under grazing angle ... -
Micro and nanostructured materials for the development of optical fibre sensors
The measurement of chemical and biomedical parameters can take advantage of the features exclusively offered by optical fibre: passive nature, electromagnetic immunity and chemical stability are some of the most relevant ... -
Optical sensors based on lossy-mode resonances
(Elsevier Science, 2017) Artículo / Artikulua -
Sensors based on thin-film coated cladding removed multimode optical fiber and single-mode multimode single-mode fiber: a comparative study
Two simple optical fibre structures that do not require the inscription of a grating, a cladding removed multimode optical fibre (CRMOF) and a single-mode multimode single-mode structure (SMS), are compared in terms of ... -
SnO2 based optical fiber refractometers
In this work, the fabrication and characterization of refractometers based on lossy mode resonances (LMR) is presented. Tin dioxide (SnO2) films deposited on optical fibers are used as the LMR supporting coatings. These ...